20 Most Recent D-Link ADSL2/2+ Modem/Wireless Router 4-Port Switch, 802.11g, QoS (DSL-2640B) Questions & Answers


Are You Looking For Dlink Phone Support Or Chat Support?
We will reveal all simple ways to contact Dlink Customer service. Typically d-link provides Full Support for 30 Days From the date of purchase but if you register the product with them right after you Buy the Dlink Than it Can be extended up to 90 Days ( 3 Months)Free Support & Warranty. https://wirelessrouterexpert.com/customer-support/contact-dlink-tech-support

D-Link ADSL2/2+... | Answered on Aug 29, 2018


Yes, time to upgrade your router.

D-Link ADSL2/2+... | Answered on Feb 07, 2018


Lynne,

First you need to delete your phonenumber from this post. This is a public post accessible from all over the globe.
Second you need to contact your ISP with this problem. It might be that your ADSL modem isn't compatible or wrongly configured for your present connection.

D-Link ADSL2/2+... | Answered on Jul 16, 2017


Go to My Documents, there you should find an icon for wireless settings. Click on wireless settings, you'll find the security key.

D-Link ADSL2/2+... | Answered on Jun 01, 2017


Your can perform a factory reset by inserting a paper clip tip in the the small reset hole for 10 sec while powered on. You will have to configure the router fro scratch.

D-Link ADSL2/2+... | Answered on Jan 07, 2017


Look under network connections and open wireless connections. Then look for you router SSID (network name) and the press connect button. If password/key is needed enter that at this time. Make certain your laptop wireless is turned on - some have an physical on/off switch.

D-Link ADSL2/2+... | Answered on Jan 07, 2017


Always check your LAN cable between your modem and the router and try a new cable. Login the make certain your router is configured correctly to connect to your mode.

D-Link ADSL2/2+... | Answered on Jan 07, 2017


The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset

If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can set-up form scratch.

D-Link ADSL2/2+... | Answered on Jan 06, 2017


See how AOL connects to the router and in the menu there are different requirements PPP, PPPoE, dynamic, etc.

D-Link ADSL2/2+... | Answered on Jan 06, 2017


The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset

If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can set-up form scratch.

D-Link ADSL2/2+... | Answered on Jan 06, 2017


Means you have no internet connection. Try a new LAN cable between you router and internet modem. Connect directly to you internet modem make certain it is working. Reboot both devices.

The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset

If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can set-up form scratch.

D-Link ADSL2/2+... | Answered on Jan 06, 2017


Login in using your browser and go to the wireless settings and set-up a wireless password/key. Remember the key because each device will now need it to connect. You can also turn OFF Broadcast SSID and your network name will not be shown on anyone's device. You must remember the network name when using this method.

D-Link ADSL2/2+... | Answered on Jan 06, 2017


Make sure you download the correct firmware for you Hardware.
Usually you can login on your browser to you router and go to the management section to check for firmware updates and select that button and it will download and install the firmware. On some models, you have to go to the D-link web site and look for firmware updates for your router. Always check what you current firmware you have installed and check the version of you router modem hardware (A, B, C etc). Then you can manually download the firmware (usually in a ZIP file), open the zip file, and then using your browser connected to the router look for Update Firmware. You will have to go to where (folder) you saved the downloaded update and select that file. It is recommended that you update using a LAN connection and not a wireless connection.

D-Link ADSL2/2+... | Answered on Jan 06, 2017


First try rebooting the router to see if it "see' the kindle. Make certain use are using the correct network password/key - it is case sensitive. Does the Kindle connect to other WiFi networks? If not the Kindle may be the issue

The ultimate answer is a factory reset of the router.

D-Link ADSL2/2+... | Answered on Jan 06, 2017


Usually you can login on your browser to you router and go to the management section to check for firmware updates and select that button and it will download and install the firmware. On some models, you have to go to the D-link web site and look for firmware updates for your router. Always check what you current firmware you have installed and check the version of you router modem (A, B, C etc). Then you can manually download the firmware (usually in a ZIP file), open the zip file, and then using your browser connected to the router look for Update Firmware. You will have to go to where (folder) you saved the downloaded update and select that file. It is recommended that you update using a LAN connection and not a wireless connection.

D-Link ADSL2/2+... | Answered on Jan 06, 2017

Not finding what you are looking for?
D-Link ADSL2/2+ Modem/Wireless Router 4-Port Switch, 802.11g, QoS (DSL-2640B) Logo

426 questions posted

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Mike

Level 3 Expert

4363 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

D-Link Computers & Internet

  • D-Link Computers & Internet

Most Popular Question

need smd ic no mp14820s in dsl 2640u

  • Computers & Internet
Loading...