20 Most Recent Pioneer CDJ-800MK2 Turntable - Page 6 Questions & Answers


Hi, what the error code is telling you, NG: LCRSLSRBLBR, is that due to some output problem or power supply, the speaker outputs are not working, NG by Non Good, L by Left, C by Center, R by Right, SL by Surround Left, SR by Surround Right, BL by Back Left and BR by Back Right
I suggest you check all speaker connections, disconnect all speakers and see that this is the same, the problem is in the computer, if it does not indicate failure, then go connecting the speakers one by one until the fault appears again and in that last speaker connected, the fault could be, try all the speakers
I hope you can solve the problem, but look for a specialized technical service
Greetings Franco Dosil


Hola, lo que te esta indicando el c?digo de error, NG:LCRSLSRBLBR , es que por algun problema de salida o fuente de alimentaci?n, no est?n funcionando las salidas de parlante, NG por Non Good, L por Left, C por Center, R por Right, SL por Surround Left, SR por Surround Right, BL por Back Left y BR por Back Right
Te sugiero revises todas las conexiones de parlantes, desconecta todos los parlantes y observas que esta igual, el problema esta en el equipo, si no indica falla, entonces ve conectando de a uno los parlantes hasta que te aparezca nuevamente la falla y en ese ultimo parlante conectado, podr?a estar la falla, prueba todos los parlantes
Espero puedas resolver el problema, sino busca un servicio t?cnico especializado
Saludos Franco Dosil

Pioneer Audio... | Answered on Jun 21, 2019


Hello Danny, for what you are saying, do you need a telephone amplifier, to increase the volume of your phone and connect it to your Pioneer?
usually the signal level of a phone, reaches to excite the Pioneer
You connect it through the Auxiliary input and you can play it
You can also find some application on the phone, which increases the output level
Discuss, if another is the reason for your question
Greetings Franco Dosil

Hola Danny, por lo que comentas, necesitas un amplificador de telefono, para incrementar el volumen de tu telefono y conectarlo a tu Pioneer?
por lo general el nivel de se?al de un telefono, alcanza para excitar al Pioneer
Lo conectas por la entrada Auxiliar y puedes reproducirlo
Tambien puedes buscar alguna aplicacion en el telefono, que te incremente el nivel de salida
Comenta, si es otro el motivo de tu pregunta
Saludos Franco Dosil
https://www.pioneerelectronics.com/PUSA/Unassigned-Content/Manuals/VSX-D508+OPERATING+INSTRUCTIONS

Pioneer Audio... | Answered on Jun 20, 2019


Hello Victor, I sent you the link of the user manual and service manual of your Pioneer VSX-D512
Hope this can help you
Greetings Franco Dosil

Publicado por Victor en 18 de junio de 2019
Hola Victor, te envio el link del manual de usuario y manual de servicio de tu Pioneer VSX-D512
Espero que te sirva
Saludos Franco Dosil
http://www.kallhovde.com/pioneer/tricomp/Audio/VSX/VSX-D512_RRV2743.pdf
https://www.pioneerelectronics.com/PUSA/Unassigned-Content/Manuals/VSX-D412+Operating+Instructions
http://www.pioneer-latin.com/downloads/xre3069a.pdf

Pioneer Audio... | Answered on Jun 18, 2019


Hello Laurence, you can not enable the subwoofer output, from the equipment, only with the remote control
You should buy a new one, I will send you the link to download the user manual and have a reference of the remote control
I hope you can solve the problem
Greetings Franco Dosil

Hola Laurence, no puedes habilitar la salida subwoofer, desde el equipo, solamente con el control remoto
Deberias comprar uno nuevo, te envio el link para que descargues el manual de usuario y tengas referencia del control remoto
Espero puedas resolver el problema
Saludos Franco Dosil
https://www.pioneerelectronics.com/PUSA/Unassigned-Content/Manuals/ci.Operating+Instructions+VSX-D498.Protected

https://www.amazon.com/Replacement-Control-PIONEER-VSXD498-CUVSX157/dp/B009D5IXA2

https://www.aliexpress.com/item/Remote-Control-For-Pioneer-VSX-D498-AXD7662-8300766200010IL-VSX-42-AXD7632-VSX-500-VSX-300-VSX/32851398929.html

Pioneer Audio... | Answered on Jun 07, 2019


Hi
This is what I found out ..cheers
img_20180821_215613-2pf1amvhnv1oqxu4fqblz2da-3-0.jpg

img_20180821_214812-2pf1amvhnv1oqxu4fqblz2da-3-2.jpg

Pioneer Audio... | Answered on May 27, 2019


"I have a Pioneer VSX-1022 receiver. I was setting a FireTV to control it. FireTV turned it off but couldn't turn it back on. I held down the Adv Surround button and the Standby button and it came back on. Seemed to be working fine. Turned it off. Came back later to watch some TV and t wouldn't turn on. "


Maybe setting problem. Download VSX1022 service manual to read advance setting if this manual has. If problem cannot solve, just phone pioneer to call for help or send an email to their service department. They will help you. I recommend phone them. Don't be shame when call for help.

Pioneer Audio... | Answered on May 26, 2019


Hello Warrior, for what you describe you want to connect to a Pioneer Vsxd 901s, an equalizer and this to two amplifiers, to give you an idea, I need you to describe the equipment you want to interconnect, brands and models and also comment what you want to achieve to be able to advise you in the best possible way
I await your response with the information of your teams
Greetings Franco Dosil
Hola Warrior, por lo que describes quieres conectar a un Pioneer Vsxd 901s, un ecualizador y este a dos amplificadores, para poder darte una idea, necesito que describas los equipos que quieres interconectar, marcas y modelos y tambi?n comenta lo que deseas lograr para poder aconsejarte de la mejor manera posible
Espero tu respuesta con la informaci?n de tus equipos
Saludos Franco Dosil

Pioneer Audio... | Answered on May 24, 2019


unplug it and press the power buton and then hold the power button, and while your holding the power button, plug it back in

hope it worked!!!

Pioneer Audio... | Answered on May 23, 2019


“My pioneer VSX-531 volume turn download” download VSX-531 service manual and look for a volume control IC and check voltage supply if it is correct. If correct, check volume output,treble and bass waveforms to see if they are correct. If not, replace the IC. If not fixed, replace volume control.

Pioneer Audio... | Answered on May 22, 2019


Hello Ron, your Pioneer, does not own a Factory Reset
The problem that has no sound in any of the speakers, probably is due to the integrated power circuit, is burned
It has in the same integrated circuit, the two audio channels
I suggest you consult a specialized technical service
I hope I can solve the problem
Greetings Franco Dosil

Hola Ron, su Pioneer, no posee un Restablecimiento de Fabrica
El problema que no tiene sonido en ninguno de los parlantes, probablemente se debe a que el circuito integrado de potencia, se encuentre quemado
Tiene en el mismo circuito integrado, los dos canales de audio
Le sugiero consulte en un servicio t?cnico especializado
Espero logre resolver el problema
Saludos Franco Dosil

Pioneer Audio... | Answered on May 19, 2019


“no sound coming out from the speaker” Choose radio to see if sound produces from speakers. If no, check switching control (control which signal is inputted such as radio, CD and aux.)IC & its voltage as well as voltage & power amp, including their voltage supply. Don't forget to download pioneer XV-EV9 service manual. If it have a DSP, it is also need to be checked by an oscilloscope including DSP X'tal(crystal) signal I/O,clock signal such as, L/Rclock(LRCL), bit clock(BCK),audio clock(ACK), DATA I/O.

Pioneer Audio... | Answered on May 04, 2019


Hello Jade, so you describe there may be a problem in the Stanby circuit or secondary source
I am looking for the service manual of your Pioneer VSX-D702S and I can not find it, nor do I find information of that model, if with the models D701S and D703S
You could confirm the model of your Pioneer, to study the circuit and see the possibilities of failure
Send a photo of the front and one of the back
I wait your answer
Greetings Franco Dosil

Hola Jade, por lo que describes puede haber un problema en el circuito de Stanby o fuente secundaria
Estoy buscando el manual de servicio de tu Pioneer VSX-D702S y no lo encuentro, tampoco encuentro informacion de ese modelo, si con los modelos D701S y D703S
Podr?as confirmar el modelo de tu Pioneer, para estudiar el circuito y ver las posibilidades de falla
Manda una foto del frente y otra de la parte posterior
Espero tu respuesta
Saludos Franco Dosil

Pioneer Audio... | Answered on Apr 25, 2019


Hello Jim, if the components you describe bring the indication recorded on them, 2SB530 or B530 and 2SD370 or D370, are the output transistors of your Pioneer SA8100 and as you describe are mounted on heat sink (aluminum)
Ask, what kind of failure do you want to fix?
I hope that my answer help you
Greetings Franco Dosil

Hola Jim, si los componentes que describes traen la indicaci?n grabada en ellos de, 2SB530 o B530 y 2SD370 o D370, son los transistores de salida de tu Pioneer SA8100 y como describes est?n montados en disipador de calor (de aluminio)
Pregunta, que tipo de falla quieres arreglar?
Espero te haya servido mi respuesta
Saludos Franco Dosil

Pioneer Audio... | Answered on Apr 19, 2019


Hello Waseem, check that you have the connections between the Pioneer and your TV, so connect from the Pioneer's HDMI output to the HDMI input on the TV, with an HDMI-HDMI cable
Verify that the TV is selected for the Blu-Ray input
I hope you have luck in the checkup
Greeting Franco Dosil

Hola Waseem, verifica que tengas bien las conexiones entre el Pioneer y tu televisor, osea conectar desde la salida HDMI del Pioneer a la una entrada HDMI en el televisor, con un cable HDMI-HDMI
Verifica que el televisor se encuentre seleccionado para la entrada del Blu-Ray
Espero que tengas suerte en el chequeo
Saludo Franco Dosil

Pioneer Audio... | Answered on Apr 19, 2019


Hello John, to get sound in the "System B" really called "Zone 2" you have to select in the menu, which sound source will come out through this output and there you will have the solution
In the user manual it is well specified


Hola John, para obtener sonido en el "Sistema B" realmente denominados "Zona 2" tiene que seleccionar en el menu, que fuente de sonido va a salir por esta salida y ahi tendra la solucion
En el manual de usuarrio esta bien especificado
https://data2.manualslib.com/pdf2/44/4378/437730-pioneer/vsx1122k_operating_instructions.pdf?4c787a85640d8c79c964ed8b0fc26af7&take=binary

Pioneer Audio... | Answered on Apr 15, 2019


Hello Dennis, obviously you have a problem in the power supply or the power output stages, which is why the 1.25 A 125 V fuse is burned

Hola Dennis, evidentemente tienes un problema en la fuente de alimentaci?n o las etapas de salida de potencia, motivo por el cual se quema el fusible de 1.25 A 125 V

Pioneer Audio... | Answered on Apr 15, 2019

Not finding what you are looking for?
Pioneer CDJ-800MK2 Turntable Logo

78 questions posted

Ask a Question

Usually answered in minutes!

Top Pioneer Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

Anthony

Level 2 Expert

227 Answers

Are you a Pioneer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Pioneer Audio Players & Recorders

  • Pioneer Audio Players & Recorders

Most Popular Question

39 m getting 8709

  • Audio Players & Recorders
Loading...