Top 20 Pioneer CDJ-800MK2 Turntable Questions & Answers


Hi
You've made a great mistake indeed. Contact any service technician. With some sets, there will be a protection fuse [over voltage protection]. If your set have been included this protection device, your luck. If not, you might have to replace the power supply section to this device.
Gopakumar Gopalan Google

Pioneer... | 49 views | 0 helpful votes


Hum is generally associated with electrolytic capacitors. If the hum is on both channels it will be the power supply. Generally it will be the big ones there that are the cause.

Pioneer... | 30 views | 0 helpful votes


It looks like a Sheet Switch problem. It is quite common for CDJs.
You can replace it yourself if you feel quite confident. No special tools, no soldering is required just a few screwdrivers. It needs caution though because you will have to dismantle several parts.
The replacement part no is: DSX1065.
You can find it here as well:
http://www.artaudioparts.com/DSX1065_SHEET_SWITCH_FOR_PIONEER_CDJ1000MK2,CDJ1000MK3,CDJ800MK2/p1627382_9647915.aspx

Pioneer... | 103 views | 0 helpful votes


According to Pioneer there are 2 possible faults associated with this error.

Option 1 - Error in mechanical operations Unrecoverable: Turn the power off. The error indication will be cleared. If the error still shows then it's Option 2.

Option 2 - Communication error between operating section and main section The error indication is cleared when the communication is finished (if it can finish).

Communication fault between the control interface (the PCB with all the switches on) and the main PCB (the motherboard in the base of the unit). It could be that the main ribbon cable that connects between the two has come loose or damaged. The control interface works on a digital PCM system, and if there is a problem with this, the motherboard throws a fit.

Pioneer... | 1,560 views | 1 helpful votes


What is the problem?

Pioneer... | 650 views | 0 helpful votes


You can have a fuse problem only in you plug it diectly to 240V, the UK voltage. Check that the converter is a step down transformer, 240 to 110 volts. The system should work with 110Volts. If everything is ok, then you blew the system´s powersupply with the 240Volts. that is difficult to solve.

Pioneer... | 197 views | 0 helpful votes


wipe it up using moist damp cloth ,slightly soapy, and invite her back to help you,

Pioneer... | 170 views | 0 helpful votes


PART NUMBER IS DAC2059 This also includes the play button.you can order from pioneer parts on line

Pioneer... | 822 views | 2 helpful votes


For General Service & Support call 1-800-421-1404
or contact us by e-mail
For Replacement Parts
call 1-800-228-7221
or visit Pioneer Parts Online

Pioneer... | 85 views | 0 helpful votes


when removeing top cover you will see the power supply on top right side faceing you.there are fuses on that board. Some of the fuses will look like transistors, however will only have two legs,check all. chances are you may have one or more bad.

Pioneer... | 310 views | 1 helpful votes


1st check if there any pieces of paper or bits of sticky label inside. If that is not the problem then the "main cam" is the next suspect.

Look here for a new cam :-
http://stores.ebay.co.uk/methleykev

Pioneer... | 72 views | 0 helpful votes


Send to I A Electronics.2420 E 55th pl. Indianapolis,in.46220 see IAELECTRONICS.COM for website.We are a pioneer repair center

Pioneer... | 315 views | 0 helpful votes


e8301 is cd player error at start up. you will have to take the top off and see if laser assembly is stuck from slideing in or out,it should be fully returned to the return switch,it should be close to the spin motor before spinning. also see if disc spins

Pioneer... | 2,770 views | 4 helpful votes


Laser pick may need cleaning or replacing.

Hope this helps.
http://www.technicsdjuk.com/
http://stores.ebay.co.uk/methleykev

Pioneer... | 86 views | 0 helpful votes


Hi,

its proberly the jog wheel sensor sheet thats causing the problem, if the jogwheel is powering up ok. if you havent had your player repaired, contact me @ www.audiovisualservices.info

Thanks.

Pioneer... | 120 views | 0 helpful votes


e7201 is a toc error.If disc spins then you have a defective laser assembly

Pioneer... | 453 views | 0 helpful votes


hi there,
you need to clean compartment of the CDJ, there must be dirt which dont let the cd play, also let me know it you get any error code.

djajay

Pioneer... | 638 views | 0 helpful votes

Not finding what you are looking for?
Pioneer CDJ-800MK2 Turntable Logo

78 questions posted

Ask a Question

Usually answered in minutes!

Top Pioneer Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

Anthony

Level 2 Expert

227 Answers

Are you a Pioneer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Pioneer Audio Players & Recorders

  • Pioneer Audio Players & Recorders

Most Popular Question

39 m getting 8709

  • Audio Players & Recorders
Loading...