20 Most Recent Linksys WRT300N Wireless Router Questions & Answers


The Problem is all Lan port light are solid and power light is dim. And you hear a very low hizzz noise from the router.

Solution is

I Fixed it with a new 470uf 10v cap ps its the one next to the circle copper wrapped wire than CS29 is written next to it.

Just replace it and it will start work again.
12_22_2018_4_18_59_pm.jpg

Linksys WRT300N... | Answered on Apr 28, 2019


I would suggest borrowing a different known working wireless adapter, and test trying that. Or test using a wired connection, just to prove it is the adapter. Perhaps the wireless adapter you are using is flaky.

Linksys WRT300N... | Answered on Oct 15, 2018


You may want to check thr router's settings. There is a web number that you type into your browser that will give you access to the router settings. It is possible that your line connections doesn't have a signal running through it . If you have fios..check your box. If you have cable check your modem

Linksys WRT300N... | Answered on Feb 18, 2018


Is your printer wifi enable? If so you should be able to use the setup disk's wireless connection wizard to help guide you through the steps.

Linksys WRT300N... | Answered on Sep 11, 2016


It is not enough to have a dongle, you also need the App from the AppStore (it is free) and you need a Smart TV, where you can stream the content to.

Linksys WRT300N... | Answered on Apr 15, 2015


Hi,

The LINKSYS WRT300N is a standalone device, there are no software/driver needed on your PC for the router to work. However, there is an easy Setup Wizard that is in the CD that normally comes with the unit.

Unfortunately, Linksys did not make the specific Setup Wizard (Version 1.3) for the WRT300N available online. However, if you care to try the Setup Wizard for a WRT54GC, it may downloaded from the LINKSYS ftp site here. I used to have a WRT54G and I did make use of the Setup Wizard for that model. I upgraded to WRT300N. The setup wizard for the old WRT54G worked likewise on the new WRT300N.

Alternately, the WRT300N can still be configured without the CD or the Setup Wizard by logging into the Configuration Page (192.168.1.1). Remember to use LAN interface when setting the router (as shown in the connection diagram) and set your PC to an IP Address of 192.168.1.2, Subnet Mask of 255.255.255.0; Follow on screen instructions and enter settings/configurations manually.

Hope that this be of some help/idea. Pls post back how things turned out or should you need additional information. Additionally, if you still prefer to have a copy of the original WRT300N Setup Wizard, pls include your email address that I may send it to you as an attachment.

Good luck and kind regards.

Linksys WRT300N... | Answered on Mar 23, 2015


Make this as a access point.

Linksys WRT300N... | Answered on Jun 19, 2014



Go to this link
http://ui.linksys.com/files/WRT160N/v1/1.01.21/Upgrade.htm

Here you can find and upgrade the router firmware.

Linksys WRT300N... | Answered on Jun 18, 2014


If you're after the firmware it's downloadable from http://support.linksys.com/en-eu/support/routers/WRT300N

Linksys WRT300N... | Answered on Aug 06, 2013


To connect to your wireless router, the router's wireless settings needs to be configured with the SSID, encryption etc. and also the wireless cards in all the laptops/computers needs to be configured with these router's wireless settings. Then the laptops/desktop computers can communicate with your wireless router.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default admin PW (write it down and put it in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Linksys WRT300N... | Answered on Feb 12, 2013


Not really required. Connect the ISP modem to main uplink port. Then connect pc to any other port. Done!

Linksys WRT300N... | Answered on Nov 06, 2012


all lights on means..?? they are ALL on and not 'blinking' ?? If so, and you've tried power-cycling it and still no access, try a factory reset. If still nothing, assume the router is now swimming with the fishes

Linksys WRT300N... | Answered on Jul 22, 2012


you have to increase your memory if you have an old computer. upgrade program you are using. are you getting all your upgrades automatically or do you have it set manuel? usually can find in startup menu

Linksys WRT300N... | Answered on May 07, 2012

Not finding what you are looking for?
Linksys WRT300N Wireless Router Logo

241 questions posted

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Mike

Level 3 Expert

4367 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

WRT Linksys

  • WRT Linksys

Most Popular Question

wrt300n power light off all other

  • Computers & Internet
Loading...