20 Most Recent GE Interlogix Dvmre Pro 10 Channel Triplex Dvr with Cdrw Questions & Answers


check charged, in this trouble the current is 12V @ 7 amp but the chargen not is provides sufficient current. change the source for other in equal condicions and test.

GE Interlogix... | Answered on Apr 20, 2011


What type of cable(s) are you using for the video signal?

Thanks!

GE Interlogix... | Answered on Nov 18, 2010


You are going to need to contact the manufacturer to have them assist you in bypassing and then resetting that second security code. There is no simple way to just get around it... it is hard coded now to memory inside the unit. You would need to take apart the whole system and take out all the internal batteries, but it is very difficult and delicate work. Then leave them out and leave it unplugged for at least an hour, that should erase the memory and all stored passcodes, but it is not easy at all.

Give GE Security a call to get assistance with this from a live person. Their number is 1-888-437-3287

GE Interlogix... | Answered on Oct 10, 2010


Request a copy from point of purchase. That is an expensive unit.

GE Interlogix... | Answered on Oct 20, 2009


The Fail To Comm message is not related to your low battery problem. A Fail to Communicate occurs when the alarm system tries to send a signal (alarm, trouble or restore) to a monitoring service but can't. Most often the causes are telephone related. Has your system been disconnected from it's phone line? Have you recently changed phone services from your main carrier to an internet provider that provides VOIP service? Sometimes alarm systems have a hard time communicating over these services. Whatever the reason for the

GE Interlogix... | Answered on Aug 30, 2009


I'm presuming you are using Internet Explorer. You may need to change your browser's security settings to solve this problem.

Using Internet Explorer, click on TOOLS, Internet Options, Security, Local Intranet, then move your slider all the way down to Low and click Apply.

GE Interlogix... | Answered on Mar 18, 2009


I would start by power cycling your system. Remove the battery & power. After waiting 10 minutes or so reconnect the battery and then power. Other than that you need to be a bit more specific with your issues.

GE Home Security | Answered on May 03, 2019


Try disarming system twice to get the fire zone to reset. If that doesn't work, try to downpower the entire system, including back up battery then re-power the system with the back up battery first.

GE Home Security | Answered on Oct 24, 2018

Not finding what you are looking for?
GE Interlogix Dvmre Pro 10 Channel Triplex Dvr with Cdrw Logo

19 questions posted

Ask a Question

Usually answered in minutes!

Top GE Home Security Experts

Bill

Level 1 Expert

39 Answers

Cindy Wells

Level 3 Expert

6046 Answers

Are you a GE Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GE Home Security

  • GE Home Security

Most Popular Question

a10 channel dvmr 10ezt when tried

  • Home Security
Loading...