20 Most Recent RCA WHP141 Consumer Headphones Questions & Answers


I placed a little vegetable oil around the lid using a toothpick to apply the oil. Wait a few minutes and the cover will come right off.

RCA WHP141... | Answered on Feb 17, 2018


make sure they are fully charged. if it drops below a certain volts itll cut out.

RCA WHP141... | Answered on Feb 02, 2018


Simple, your PC should have a headphones jack, sometimes with a green ring around it.
Plug the headphones plug that comes out from your new headset base to it. agidi.png
Its cable labeled 13
To a plug that looks like so: agidi.jpg
best luck

RCA WHP141... | Answered on Dec 14, 2016


I sprayed silicone all the way around grove and waited about 5 min. than took palm and keept working it counter clockwise using pressure

RCA WHP141... | Answered on Jun 14, 2015


check the TV volume. it must be aat least 50 percent or the phones will shut down after 4 minutes.

RCA WHP141... | Answered on Mar 03, 2015


BATTERY INSTALLATION AND INFORMATION
Your wireless headphone unit requires two rechargeable AAA batteries.
Rechargeable batteries are uncharged when you purchase them. Before
you can use the wireless headphones, the batteries must be charged for
16 hours. Follow these steps to install and charge the batteries.
Installing the Rechargeable Batteries
Take care to follow these steps to correctly install the batteries.
1. On the right headphone, locate the battery compartment (1).
Use the finger depression on the compartment to turn the battery
compartment cover counterclockwise to remove the cover.
2. Insert two AAA rechargeable batteries, carefully following the
markings inside to ensure the batteries are inserted properly, with
the + and - ends in the correct positions.
3. Replace the battery compartment cover.
Charging the Rechargeable Batteries
To recharge the headset unit, follow the directions below. Note: The
cradle/transmitter on the WHP141 is not a recharging cradle, although
you may place the headset in the cradle during recharging.
Follow these steps to recharge the NiMH rechargeable batteries.
1. Make sure the ON/OFF switch (2), located on the right headphone,
is in the OFF position.
2. Connect the AC/DC main power adapter to the DC IN power
supply socket (11), located on the back of the cradle/transmitter.
3. Plug the adapter into an electrical outlet.
4. Connect the charging cable (10), located on the back of the
cradle/transmitter to the recharging input (3), located on the right
headphone. The headphones can either be placed in the
cradle/transmitter or placed next to the unit. If the headphones are
connected correctly, the charging LED indicator light on the
cradle/transmitter (8) illuminate.

RCA WHP141... | Answered on Jan 09, 2015


I used WD40 on a paper towel spread in in the groove all the way around then used my palms one on each side of the ear peace to turn it and that freed it up.

RCA WHP141... | Answered on Jul 19, 2014

Not finding what you are looking for?
RCA WHP141 Consumer Headphones Logo

68 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Are you a RCA Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

RCA Audio Players & Recorders

  • RCA Audio Players & Recorders

Most Popular Question

39 t get battery cover turn

  • Audio Players & Recorders
Loading...