20 Most Recent Dual XDMR7710 CD Player Questions & Answers


I already answer this question. You must have posted twice.

Dual XDMR7710 CD... | Answered on Dec 22, 2013


Make sure you have proper voltage on both the red and yellow wires in the main wiring harness to the back of the radio. Car stereos have two 12-volt inputs. If only one is connected, you can get unexpected results. If you have voltage (12v+) on these two wires and the radio has ground, then unplug it and reconnect. If it still doesn't work, the radio is toast.

Dual XDMR7710 CD... | Answered on Dec 22, 2013


press the small reset button i currently have the same issue and resetting it dont work for me

Dual XDMR7710 CD... | Answered on Nov 07, 2013


Hi,

This is what I found out about it's value. It is a 10R CHASSIS AK30 10 Ohms / 0.25W. If you wonder where you can purchase this? Click Here, it may help you out.

Thank you for choosing FixYa!

Dual XDMR7710 CD... | Answered on May 20, 2011


Here is a link to the owner's manual for the stereo, it should have the information you are looking for:
http://a248.e.akamai.net/pix.crutchfield.com/Manuals/070/070XDMR771.PDF

Dual XDMR7710 CD... | Answered on May 22, 2010


YES go to walmart and look at the dash Plastics inserts there marked with year make model and a SCOOSH wiring harness to plug in to ur old harness so u can connect the harness to ur Head unit wiring and color Cornated with What it is on the wires HOOK THAT SONA ***** UP looks nice

HOpe i helped bud i have the same unit in my 02 intrepid Se

Dual XDMR7710 CD... | Answered on Apr 16, 2010


Sounds like something is tripping the sensor. I believe those have a sensor so that if it hits something it goes back.
It will need sent in to a qualified tech to be fixed if the cause of the problem isn't obvious.

Dual XDMR7710 CD... | Answered on Mar 25, 2010


check your ing wirer

Dual XDMR7710 CD... | Answered on Jan 12, 2010


Refence wire? could you clarify for me please?

Dual XDMR7710 CD... | Answered on Jan 07, 2010


Hello livinglifeas,

You can connect the regular preamp outputs to a sub amp. Dedicated sub outputs will normally have a built-in crossover whereas the regular front/rear preamp outs will be full-range. Just make sure that the amp you use for your sub(s) has a "low pass" filter.

Hope this helps.


Dual XDMR7710 CD... | Answered on Dec 14, 2009


Sounds like you have the Premium Sound system. The main power plug is long and probably black, the other plug is square with a grey round cord coming out correct?

You can either take your power harness back and get the correct one ( a little more expensive) or run ALL 4 sets of speaker wires back to the right rear quarter panel. That is were the OEM amp is mounted and taking that panel out requires you to remove the top and bottom tailgate trims, a dozen screws, the seat belt D-ring and 4-5 plastic push clips that will probably snap off...:( Also, this will not make the OEM subwoofer work.

From 20 years experiance in this biz, save the time, spend the extra 30$ or so and just buy the correct connector. Check MetraOnline.com and search there.

Scott

Dual XDMR7710 CD... | Answered on Dec 05, 2009


Cut the red and yellow wires and cross them to the opposites and connect again and this will save your cd players memory

Dual XDMR7710 CD... | Answered on Nov 12, 2009


Hello raptor_bot,

The problem is that the dash opening in your Alero is only 6 3/8" in depth and the XDMR7710 is 7X7X2, which means that unless you cut into the vehicle firewall to make some room, 5/8" of the receiver will need to stick out the front of the dash.

Why not select a receiver that fits?

Hope this helps.

Dual XDMR7710 CD... | Answered on Sep 11, 2009


It could be a few different factors.

Do you burn your cd's with a computer?
If so,what program do you use?If you use Nero,Roxio or any burning software of this sort,the data may not burn correctly resulting in an error during playback.

Another common problem can be the cd you are using or the drive it burns on.There are so many variables in CD burning that can lead to these issues.It happens to me a lot,so the solution is:

Use windows media to burn and it should go well most of the time.If you still have the problem,it may be the drive which can be replaced at low cost.

If they are regular cds you bought from the record company,than it is most likely the brand of car stereo you have.The laser could be damaged from putting scratched or damaged cd's in,or it could just be that the player is not great.


Dual XDMR7710 CD... | Answered on Aug 29, 2009


I had this same problem.Took it to a friend and we bypassed the amp completely and ran new wires to all the speakers.

Dual XDMR7710 CD... | Answered on Aug 29, 2009

Not finding what you are looking for?
Dual XDMR7710 CD Player Logo

45 questions posted

Ask a Question

Usually answered in minutes!

Top Dual Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5013 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8981 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Dual Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Dual Car Audio & Video

  • Dual Car Audio & Video

Most Popular Question

dual xdmr7710 player wont save settings

  • Car Audio & Video
Loading...