20 Most Recent Hobart D340-6009 Mixer Questions & Answers


the noise is not a good sign. would rec. taking apart trans. and investigate gears,shafts, before futher damage takes place

Hobart D340-6009... | Answered on Jan 09, 2010


Got a hold of Hobart company and resolved the problem.

Hobart D340-6009... | Answered on Jan 07, 2010


Hi NICK. Your question is an old one so I don?t know if you?ve a response to your initial request yet. Regardless, I shall attempt to provide you some help. You can download an Instruction (Operations and Maintenance) manual for your H600/L800 series mixer online at : http://www.hobartservice.com/. Click on Manuals & Support> and on the next screen click on Quick Searches>By Model. Enter your model, H600, without the T. A whole screen of models and titles will appear under several categories. Look for ?Instruction Manuals? (you can click the minus button of the other categories to compress the listings and reduce screen clutter.) You will see two listings for h600/L800 mixers, titled Instructions Manual: H600/L800 Mixers. If your mixer was manufactured prior to Sep 2002, download F-18812 Rev B (12-99) and if your mixer was manufactured after Sep 2002, download F-34816 Rev B (Apr 2003) The parts manual for your Hobart mixer is another matter. Hobart does provide parts manuals for their Legacy series mixers in PDF format online, but not for your series mixer. To access parts lists and exploded view illustrations of your mixer, you?ll need to use the very easy Hobart smartparts? webapp on the Hobart website. You?ll have to register first with Hobart to access their Hobart 'Smartparts?' app, but it is well worth the effort. Once you?ve registered, and access the Smartparts? screen, click Food Machines (4th radio button)> Floor Mixer(1st radio button)> H-600/L-800 (4th radio button)> Planetary Unit (13th radio button)(I?m assuming the shaft you refer to where the oil is leaking is the planetary (agitator) shaft that you attach the mixing blades to, so that is the assembly where you want to look for parts that might be leaking). Click on the View Figure @50% button and locate the following parts: #17 O-ring, #18 Oil Baffle, Planetary, and #23 Cap, Oil retaining. I suspect that one or both parts have worn due to age allowing the planetary lubrication oil to seep down the agitator shaft. By replacing one or both parts the leaking oil should stop. Whether you replace the parts your self or have Hobart do it, this should start you on your way. Good luck ? Howard, Burke, VA

Hobart D340-6009... | Answered on Dec 09, 2009


There are seals on the gear box. The machine would have to be quite well used to cause a leak. They are quite repairable. www.hobartcorp.com is the web site. You will need the model number to get the manuel. Have a good day.

Hobart D340-6009... | Answered on Oct 13, 2009


i read in the manual that the wiring diagram is located on the inside of the top cover. check it out..

good luck

Hobart D340-6009... | Answered on Oct 08, 2009


Bill. Whisks are not interchangable for different bowls. Try ebay to locate one.

If this solution has assisted you, please rate it. ricardok45

Hobart D340-6009... | Answered on Mar 20, 2009


Look in the bottom back of the pedestal,you will see a cover,remove the cover a contactor start switch and relay will be in there.I suspect the relay is bad,if you dont see a relay its a older unit.What is the ml #? You can find it on the data plate on the b ack.

Hobart D340-6009... | Answered on Feb 17, 2009


https://www.manualslib.com/manual/1026745/Hobart-Hl200.html

Looks to be a drift pin missing. See parts diagrams in above manual.

Hobart Food... | Answered on Jan 10, 2020


Contact Hobart directly to inquire.

Hobart Food... | Answered on Oct 31, 2019


Try this.

Take two flat blade screwdrivers and slip the blades between the planetary and the mixer body (on opposite sides) pry it off.

This has worked for me.

Hobart Food... | Answered on Oct 26, 2019

Not finding what you are looking for?
Hobart D340-6009 Mixer Logo

13 questions posted

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1364 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hobart Food Mixers

  • Hobart Food Mixers

Most Popular Question

dough hook wont cone off

  • Food Mixers
Loading...