20 Most Recent Hobart HL200C Mixer - Page 9 Questions & Answers


If your mixer's motor was built by Hobart; there are thermsiters built in to the stator's windings that can cause this problem. Check the amp draw while it is running. Also if your are over loading the mixer or using the wrong speed,, that will cause an over heating problem. You should be able to get on the ITW Food Equipment Group / Hobart web site(s) and get capacity chart.

Hobart Food... | Answered on Oct 19, 2016


Hi.

The Hobart/Kitchenaid model 4C Stand Mixer was produced between 1961 and 1977.

This unit is now a vintage piece chased by collector. Parts dealers do not sell parts anymore for such an old model.

The parts must be purchased on the second hand and vintage market, best source is Ebay. Put 4c mixer or kitchenaid 4c to find parts.

The bowl is easy to find, it is part 4162158, regular retail price for replacement is $44. buy the glass one on Ebay, that will be the original one mounted on first models.

Here Ebay list.


Vintage KitchenAid 4c Glass Mixing Bowl Excel Cond!

VINTAGE KITCHENAID 4C MIXER WIRE WHISK ONLY

KitchenAid Mixer md 4C Complete with Bowl White

KITCHENAID MIXER 4.5QT S.S. BOWL FTIS MODEL 4C 4162158


-------------------

Here also a forum where you can contact more Kitchenaid vintage appliances owners or collectors.

-----------------

The dough tool is not even easy to find on Ebay. Try contacting Kitchenaid and see if they can give you a compatible part.
If they have the original one (unlikely) , then do not be surprised if part price is over $30.

If you find a 4c with tools for spares on Ebay , buy it, and resell the parts you do not need. The whole mixer with bowl and one tool is worth over $50.

The original owners manual can also be purchased from Kitchenaid/hobart

Regards.


KitchenAid Customer Service

Hobart Food... | Answered on Sep 03, 2016


You would need to replace the Alternator to obtain the lower operating voltage.

Hobart Food... | Answered on Aug 13, 2016


call in an electrician as it may be the start/run capacitor for the motor ( indicated by motor humming but not running)
the gearing will make it very difficult to turn the blades by hand as the motor will be spinning at either 1400 rpms or 2400 rpms down to around 50 rpms for the blades

Hobart Food... | Answered on Jul 01, 2016


Google perhaps a fuse is blown something was to heavy or something was under tension to the power supply that so the machine did not get the required voltage by too much taxation by other devices on the power line group

Hobart Food... | Answered on May 05, 2016


http://thesmartpartsestore.hobartservice.com/

Hobart Food... | Answered on May 05, 2016


Because either the low speed windings or low speed control is kaput.

Hobart Food... | Answered on Mar 03, 2016

Not finding what you are looking for?
Hobart HL200C Mixer Logo

9 questions posted

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1363 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hobart Food Mixers

  • Hobart Food Mixers

Most Popular Question

need wiring schematic hobart 200t

  • Food Mixers
Loading...