20 Most Recent Linksys Wireless-G WUSB54GC (WUSB54GC-BP) Questions & Answers


hiiiiiiiiiiiiiiiiiiiiiiiiiiiii

Linksys... | Answered on Apr 25, 2017


Hi.
Linksys Wireless-G WUSB54GC Xp-sp2 v1.4 usb wireless adapter driver (xp sp1/2/3 + vista/win7/win8/mac) can be found at driverupdate us
It will take 2 mins from you to install...
I hope I have helped you...
enjoy

Linksys... | Answered on Nov 17, 2014


As long as you have the drivers it should be easy!

Linksys... | Answered on May 23, 2011


http://homesupport.cisco.com/en-us/wireless/lbc/WUSB54GC
Just follow that link select the downloads tab and then select the version of your hardware and you can download the driver. If you need any further assistance please let me know. Please take the time to accept/rate my solution if/when you find this information helpful.
Thank you,
Lee

Linksys... | Answered on Jan 15, 2011


try with Updating the Driver files with Adapter

Linksys... | Answered on Oct 06, 2010


The operating system on your computer is Windows 7 and the adapter is WUSB54GC. You are getting the Error 211 that means the drivers are not installed properly.
Though you have the CD of the adapter, you will need to download the drivers for the adapter from the web site.
Go to www.linksys.com/download , enter the model number of the adapter. select the proper version of the adapter. download the drivers for windows 7.
Now try to install the downloaded drivers. It will work.

Click here for more information about routers

Linksys... | Answered on Jul 14, 2010


install the driver first then click your micron trek then scan for your internet

Linksys... | Answered on Jun 29, 2010


It appears that the Windows service WLAN Auto Config was stopped due to an unknown reason. After re-activating this service I was able to install the wireless usb adapter 100% correctly. The Windows service WLAN Auto Config can be found if you run the program msconfig.

Linksys... | Answered on Dec 05, 2009


I have only tried this on Windows XP. If you can connect to the web using a hard line you can get this running. Make sure you have internet. Then plug the wireless adapter into the usb port and when windows ask if it can search the internet say yes. That will install a driver for the wusb54gc. Then windows will manage the device. Linksys only has the option to download the installer as opposed to just the driver. What a pain when the installer doesn't work.

Linksys... | Answered on Feb 25, 2009


Why dont you call their rma department? Here is there no. (800) 546-5797 (Option 3) and give them your rma no. so that they can pull up your information.

Linksys... | Answered on Aug 19, 2008


https://www.linksys.com/ca/support-article?articleNum=140923

Which model?
Go to the Linksys website and download the instructions for your model of extender.

Linksys... | Answered on Dec 02, 2019


There are several factors that will affect or can cause problems in connecting your Roku to your Router.

If you're getting an error message on Roku like 014, 011, make sure to indicate it in your response. Normally, if you're getting 014 message, you can follow these steps:

. A simple power cycle resolves most of the issues. To perform a power cycle, please follow the instructions below:

1. Unplug the power cables from the modem, router and the Roku player.
2. Connect the power cable to the modem (after a minute). Once all the lights on the modem are lit, plug in
the power cable to the router and then to the Roku player.
3. Go to "Settings" and redo the complete Roku setup.

If the issue continues to occur, please try the channel 1 or 3. Should it persist, you may reset the Roku
player. Here is how:

On the back or bottom of the Roku unit, you should find a recessed little hole.
- Use a pin or paperclip to press and hold the button for 30 seconds (please ensure that the power light
blinks while you are holding it down).
The Roku device will reset to default and be ready for setup again.

If the problem continues, please reflash the software via the secret screen:
1. Press the "Home" button for 5 times.
2. Press the "Forward" button for 3 times.
3. Press the "Rewind" button twice.
4. Choose Update Software and the Roku player will then restart.

You can comment your serial number or the error message that you're getting. If your getting 011, just power cycle your entire network. Also, please make sure that you're not connecting the Roku to a Guest network. The speed of your connection matters as well. It should be atleast 1.5mbps.

Linksys... | Answered on Nov 23, 2019


The vent actuators are bad. there should be two. one on each side. they are small toy like motors that open and close the vents from within to allow the hot air to blow by closing the vents to the a/c unit.

Linksys... | Answered on Nov 21, 2019


You can get best linksys router support phone number at Toll Free Number ( 1-877-769-0969 ). Linksys router Tech Support number ( 1-877-769-0969 )

Linksys... | Answered on Nov 12, 2019


DO NOT CALL FAKE NUMBERS OR GO TO FAKE WEBSITES

Linksys... | Answered on Nov 11, 2019

Not finding what you are looking for?
Linksys Wireless-G WUSB54GC (WUSB54GC-BP) Logo

17 questions posted

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Mike

Level 3 Expert

4363 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Linksys Computers & Internet

  • Linksys Computers & Internet

Most Popular Question

linksys wireless g wusb54gc xp sp2

  • Computers & Internet
Loading...