Top 20 Magimix 5100 Cuisine Systeme Food Processor Questions & Answers


Contact Magimix directly to request the wiring diagram.

Magimix 5100... | 55 views | 0 helpful votes


Give it up, and buy a new one.

Magimix 5100... | 142 views | 0 helpful votes


Yes you can, you can "cut" it off with a soldering iron by melting a slot down one side. When banging a new one on you need to remove the base and suppert the bottom of the shaft with something solid underneath it. The whole motor assembly will be sitting on this as you bang the new sleeve on with a soft mallet. If you don't there is a danger you will wreck the motor and you cannot afford to replace that bit.

Magimix 5100... | 296 views | 0 helpful votes


Yes you can, you can "cut" it off with a soldering iron by melting a slot down one side. When banging a new one on you need to remove the base and suppert the bottom of the shaft with something solid underneath it. The whole motor assembly will be sitting on this as you bang the new sleeve on with a soft mallet. If you don't there is a danger you will wreck the motor and you cannot afford to replace that bit.

Magimix 5100... | 179 views | 0 helpful votes


The shaft sleeve (the one on the motor shaft) is likely damaged. The correct solution is a new shaft sleeve and chopping blade. If you do not replace them both together the one you do not replace will damage the other one again.

Magimix 5100... | 381 views | 0 helpful votes


Magimix makes the Instructions for Use for the Cuisine 5200 available on their website:

http://www.magimix.com/upload/notice_d_utilisation/ma_cuisine/download_usa.pdf


If you don't mind paying a small fee there is also an Instruction Book available here that may also be applicable to the 4200:

http://www.magimix-spares.co.uk/Magimix-le-micro-instruction-book-and-le-micro-recipe-book/product/54138/54138/

Magimix 5100... | 510 views | 0 helpful votes


I found one in English: http://www.magimix.com/upload/notice_d_utilisation/ma_cuisine/download_usa.pdf

Magimix 5100... | 394 views | 2 helpful votes


Remove and check if there is any fault of a brush contact or switch contact or if the load trip switch had reset.
If the power is coming to the motor and is not running you need to confirm fully if the windings are open , if so replace motor.
if not remove and reset the setting of the brush/commutator.

Magimix 5100... | 1,072 views | 1 helpful votes


Stack 4 of them vertically and feed into chute

Magimix 5100... | 143 views | 0 helpful votes


Go to this site. or type magicmix in the search bar at the top of the screen, Good Luck


http://www.magimix-spares.co.uk/Parts-for-Magimix-5100-lid,-...

Magimix 5100... | 431 views | 0 helpful votes


Here is a link to order parts if you don't see the part you need there is an email link at the bottom of the page to request parts: http://www.magimix-spares.co.uk/Magimix-by-Robot-coupe-grand-chef,-1800,-R1,-parts-stocked-/products/1083/

Magimix 5100... | 221 views | 0 helpful votes


measured the width of the screw head and compared it to a comprehensive torx screw dimension chart
Thanks
Andy

Magimix 5100... | 412 views | 0 helpful votes


You need to replace the spindle i'm afraid which gets worn after a time. There a UK company that sells replacements and tells you how to replace it. Not a big job though a bit tricky. magimixspares.com

Magimix 5100... | 3,022 views | 8 helpful votes


Here is the generic English Magimix manual - it covers a lot of different model numbers. The good news about this manual is that it is picture-intensive instead of word-intensive. The key is that every piece of the bowl must be in the correct position, or the food processor won't tunr on. Hope it helps:
http://www.magimix.com/upload/usa/download.pdf

-Tha mp3 Doctor

Magimix 5100... | 514 views | 8 helpful votes


HI! magimix-spares.co.uk seems to do quite a lot of spare parts for a range of models. Here's the web address for the 5100 model: http://www.magimix-spares.co.uk/Magimix-5100-blades-and-all-discs-/products/1060/
Not sure if they'll have the blades in stock.... Hope this helps!

Magimix 5100... | 334 views | 0 helpful votes


http://www.maar.com.au/

Link for Magimix Spare Parts Page
http://www.maar.com.au/en-us/magimixparts.html

Link for Magimix Spare Parts for Model 5100
http://www.maar.com.au/en-us/magimix5100.html
=================================================
http://www.kitchenandhome.com.au/catalog/information.php?info_id=7
=================================================

Magimix 5100... | 653 views | 0 helpful votes


i have found it with alot of digging about. go to....
http://www.magimix.fr/upload/notice_d_utilisation/ma_cuisine/download.pdf
to download it from the magimix web site.
and rangerbob, dont have a go at other people having the same problem as you, this is how this website works!

Magimix 5100... | 966 views | 8 helpful votes

Not finding what you are looking for?
Magimix 5100 Cuisine Systeme Food Processor Logo

69 questions posted

Ask a Question

Usually answered in minutes!

Top Magimix Food Processors Experts

Ross Keen

Level 3 Expert

1361 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

29402 Answers

Ruth summersides

Level 3 Expert

1477 Answers

Are you a Magimix Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Magimix Food Processors

  • Magimix Food Processors

Most Popular Question

magimix sytem cuisine

  • Food Processors
Loading...