Magimix 5100 Cuisine Systeme Food Processor - Answered Questions & Fixed issues


Contact Magimix directly to request the wiring diagram.

Magimix 5100... | Answered on Aug 25, 2019 | 67 views


Give it up, and buy a new one.

Magimix 5100... | Answered on Jan 07, 2016 | 143 views


Yes you can, you can "cut" it off with a soldering iron by melting a slot down one side. When banging a new one on you need to remove the base and suppert the bottom of the shaft with something solid underneath it. The whole motor assembly will be sitting on this as you bang the new sleeve on with a soft mallet. If you don't there is a danger you will wreck the motor and you cannot afford to replace that bit.

Magimix 5100... | Answered on Sep 07, 2014 | 179 views


Yes you can, you can "cut" it off with a soldering iron by melting a slot down one side. When banging a new one on you need to remove the base and suppert the bottom of the shaft with something solid underneath it. The whole motor assembly will be sitting on this as you bang the new sleeve on with a soft mallet. If you don't there is a danger you will wreck the motor and you cannot afford to replace that bit.

Magimix 5100... | Answered on Sep 07, 2014 | 298 views


The shaft sleeve (the one on the motor shaft) is likely damaged. The correct solution is a new shaft sleeve and chopping blade. If you do not replace them both together the one you do not replace will damage the other one again.

Magimix 5100... | Answered on Oct 18, 2013 | 381 views


How to Change a Magimix Food processor plastic spindle.

This is meant as a guide only BBS ltd takes no responsibility for any damage done. We always advise that this should be done by a Magimix approved service agent.


The spindle is the part that sticks out of the motor this drives the blades, knifes, discs and cones for the food processor, this part may become worn after time or use.


Cover the main body with a cloth so as not to damage the look of the food processing machine.

Place two blocks of wood about 10cms either side of spindle cover. Then place two flat screwdrivers Horizontal either side of Magimix food processor spindle

Push down on handle of screwdrivers apply even pressure (keeping eyes well away from the spindle cover, they can fly off fast sometimes.)
The spindle will rise.


This will leave the metal centre shaft, Replace with a spindle cover bought from
www.magimix-spares.co.uk. Make sure you choose correct model, usually named on front of machine, or phone 01252 727755 for help.

When replacing, make sure that the New Food processor spindle is lined up and slide the spindle onto the centre shaft. Make sure this goes all the way down by gently tapping with a hammer.



All blades and attachments should be checked before placing back onto spindle cover, if the inside is damaged, this could damage the spindle cover again, any blade, dough blade , disc support that is marked should be replaced.

BBS Limited is the approved and dedicated supplier of Magimix parts & accessories for all Magimix products.
Please telephone +44 (0) 1252 727755 or fax +44 (0) 1252 727766 for help or advice. All images and text are Copyright (c) 2008 BBS Limited.

Magimix 5100... | Answered on Nov 11, 2013 | 1,627 views


Magimix makes the Instructions for Use for the Cuisine 5200 available on their website:

http://www.magimix.com/upload/notice_d_utilisation/ma_cuisine/download_usa.pdf


If you don't mind paying a small fee there is also an Instruction Book available here that may also be applicable to the 4200:

http://www.magimix-spares.co.uk/Magimix-le-micro-instruction-book-and-le-micro-recipe-book/product/54138/54138/

Magimix 5100... | Answered on Nov 02, 2011 | 510 views


Here is the generic English Magimix manual - it covers a lot of different model numbers. The good news about this manual is that it is picture-intensive instead of word-intensive. The key is that every piece of the bowl must be in the correct position, or the food processor won't tunr on. Hope it helps:
http://www.magimix.com/upload/usa/download.pdf

-Tha mp3 Doctor

Magimix 5100... | Answered on Oct 15, 2011 | 517 views


I found one in English: http://www.magimix.com/upload/notice_d_utilisation/ma_cuisine/download_usa.pdf

Magimix 5100... | Answered on Mar 01, 2011 | 398 views


Remove and check if there is any fault of a brush contact or switch contact or if the load trip switch had reset.
If the power is coming to the motor and is not running you need to confirm fully if the windings are open , if so replace motor.
if not remove and reset the setting of the brush/commutator.

Magimix 5100... | Answered on Sep 24, 2010 | 1,072 views


Stack 4 of them vertically and feed into chute

Magimix 5100... | Answered on Jun 05, 2010 | 143 views


Go to this site. or type magicmix in the search bar at the top of the screen, Good Luck


http://www.magimix-spares.co.uk/Parts-for-Magimix-5100-lid,-...

Magimix 5100... | Answered on Oct 31, 2009 | 433 views


Here is a link to order parts if you don't see the part you need there is an email link at the bottom of the page to request parts: http://www.magimix-spares.co.uk/Magimix-by-Robot-coupe-grand-chef,-1800,-R1,-parts-stocked-/products/1083/

Magimix 5100... | Answered on Oct 18, 2009 | 221 views


measured the width of the screw head and compared it to a comprehensive torx screw dimension chart
Thanks
Andy

Magimix 5100... | Answered on Sep 19, 2009 | 412 views


You need to replace the spindle i'm afraid which gets worn after a time. There a UK company that sells replacements and tells you how to replace it. Not a big job though a bit tricky. magimixspares.com

Magimix 5100... | Answered on Jul 18, 2017 | 3,038 views


HI! magimix-spares.co.uk seems to do quite a lot of spare parts for a range of models. Here's the web address for the 5100 model: http://www.magimix-spares.co.uk/Magimix-5100-blades-and-all-discs-/products/1060/
Not sure if they'll have the blades in stock.... Hope this helps!

Magimix 5100... | Answered on Jun 05, 2010 | 334 views


i have found it with alot of digging about. go to....
http://www.magimix.fr/upload/notice_d_utilisation/ma_cuisine/download.pdf
to download it from the magimix web site.
and rangerbob, dont have a go at other people having the same problem as you, this is how this website works!

Magimix 5100... | Answered on Jan 02, 2009 | 971 views

Not finding what you are looking for?
Magimix 5100 Cuisine Systeme Food Processor Logo

69 questions posted

Ask a Question

Usually answered in minutes!

Top Magimix Food Processors Experts

Ross Keen

Level 3 Expert

1363 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

29757 Answers

Ruth summersides

Level 3 Expert

1477 Answers

Are you a Magimix Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...