20 Most Recent Hobart D300-6036 Mixer Questions & Answers


If the plug on the cord is a molded plug and can not be taken apart you will need to change it at the motor. If you change it at the electrical box it could affect other equipment rotation on this same line.

Hobart D300-6036... | Answered on Sep 04, 2013


Remove the silver band, Remove the top cover. Remove the transmission cover. Clean out the transmission, remove all grease and oil. Replace with Chevron FM ALC EP-2 grease. This grease is an edible food grade..
Remove the planetary gear, clean and re-grease.
----------- The gear case is packed with semi-solid food grade lubricant. DO NOT add any type of liquid oil.
With the top open, just soak up the oil with paper towels and replace the grease with new. Use a spoon or something to scoop out some grease and wipe it in to the gears.
----------
Click this link below for more details and disassembly diagram:---
http://howtobyme.blogspot.com/2011/09/how-to-change-grease-on-hobart-mixer.html ------------ This will help.Thanks.Helpmech.

Hobart D300-6036... | Answered on Jan 06, 2013


It's either 1 or 3 phase. Check the data plate. If it has a two pole contactor it is three phase, if it has a three pole contactor then it is three phase.

Hobart D300-6036... | Answered on Sep 13, 2011


Contact your local Hobart office. www.hobartservice.com

Hobart D300-6036... | Answered on Sep 13, 2011


It uses grease which breaks down over time. The transmission has to opened up and all of the old lube removed and replaced with fresh lube and the bottom seal replaced. Contact your local Hobart office. www.hobartservice.com to locate your local office.

Hobart D300-6036... | Answered on Sep 13, 2011


I believe it was an S301. Check ebay for price.

Hobart D300-6036... | Answered on Sep 13, 2011


Breaker should be 125% of the rated amperage listed on the Data plate.

Hobart D300-6036... | Answered on Sep 13, 2011


Contact your local Hobart office.
www.hobartservice.com

Hobart D300-6036... | Answered on Sep 13, 2011


whats the problem?

Hobart D300-6036... | Answered on Aug 28, 2011


Hello Chardanio,

I understand you are wanting to give you Hobart D300 an Oil change.
Here are the steps you need to follow:

1. Locate the oil plug on the buttom of the head next to the plantary and the bowl slides. It will be a bolt just like on you car.
2. Run you machine for a short time in order to get the oil warm so that it will flow out of the gear box.
3. Remove the bolt so that the oil will come out into a container.
4. Once drained you reinstall the bolt
5. Remove the top of the Head (2 screws)
6. You will locate a plate that has a few bolts holding it on. On that plate there is a little tin cap you can remove it with a little flat screwdriver. Becarfule not to damage it you will have to put it back in the hole after you fill the unit.
7. Install 70oz of 140 weight gear oil. It is also thick you may have to push it in to the unit then run the unit and check the oil sight. Add slowly as you do not want to over fill the unit.
8. Replace the cap. (if damaged you will need to order a 00-064871 from the Hobart Corp. at 1-800-446-2278 or another part company)
9. Replace the top of the Head and you are done.

Turn on the unit and us it as you have before.

If you have any other questions please post to this thread.

Thank you for using FixYa hope this helps.

Hobart D300-6036... | Answered on Mar 06, 2011


All you can do is take to top off and look inside. Look for damaged gears, shafts that move sideways slightly (or more than slightly) when power is applied, that sort of thing.

Also look for a worn gearshift. Be sure that it engages fully in each gear- observe and see how the mechanism works, there's an overrun clutch with dogs that can drag if the shifter is worn or out of adjustment.

There's not much to go wrong with a Hobart, they seldom fail and are generally easy to repair. Replace the grease while you're in there, if you don't like bearing grease call around and find some food grade grease, a lot of auto parts stores carry it now.

lp

Hobart D300-6036... | Answered on Jan 16, 2011


A Hobart D300 uses a number 12 attachment hub.

Hobart D300-6036... | Answered on Dec 08, 2010


it's a standard drive system found on most hobart mixers like the a200 style and you may find only hobart parts will fit it

Hobart D300-6036... | Answered on Apr 24, 2010


the best bet is any hobart office in your area,i have seen many mixer damaged because of non-hobart parts installed in them

Hobart D300-6036... | Answered on Jan 09, 2010


This means that it is overheating, if there isnt to much mixture in the machine then the problem is in the motor. Depending on age and value of the mixer I would purchace another one as they are cheaper to buy. If it is still under warranty I suggest taking it back to the supplier that you bought it from. I hope thi is helpful.

Hobart D300-6036... | Answered on Nov 04, 2009

Not finding what you are looking for?
Hobart D300-6036 Mixer Logo

Popular Tags

36 questions posted

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1361 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hobart Food Mixers

  • Hobart Food Mixers

Most Popular Question

change

  • Food Mixers
Loading...