Following a power outtage,no control is
During a power outage, and with a regain, most of the electronic devices will get troubled with its power regulator section. As there is no display to your rCA, it means that thhere is no power comes to the internal circuit boards including display board. In most cases, failure of mains fuse occur when a AC spike comes in after a failure. If you are aware in electronics, just open your set, and look for any blown out fuse inside the mains supply system. Switch OFF the set, unplug it from AC mains and check. You can see this fuse in the mains inlet section itself. It will be a glass cartridge type, pressed into a holder. Just take it out, and check with a multimeter. If found opend [blown out] replace it with same type and ratings. Its ratings will be marked either on it rims by print, or colour bands which indicate the rating code. You can buy this from most of the electronic spare part shops at your town. Never use an over rated one. If the fuse you insert will blow out, as soon as you switch ON the set, never put an other one; because there is some short circuit occured in its power soupply section, which needs through checking. it is really a skilled work; and should be done by any well experienced technician or by the Authorised Service Center for RCA. OK.
on Sep 02, 2011