Uniden DECT 6.0 Cordless Telephone Expansion Handset - Answered Questions & Fixed issues


one if these old land line thing-a-bobs>?
LAND LINES:? sure it is.

most land lines (gee endless world wide and collapsing)
I you actual PHONE has caller ID blocking turn it off, RTM
read the manual on your phone.
if say using AT&T, land line (wild wild guess) you have special *Number to call and you must reset that using THAT>

answered for both ways, and I refuse to read your manual, on any landline-anything, mines CUT CABLE at the CURB.

Uniden DECT 6.0... | Answered on Jun 14, 2019 | 85 views


bottom lh black button is redial button just press it and it will dial the last number called

Uniden DECT 6.0... | Answered on Jun 28, 2018 | 538 views


If you have a landline, most likely you have a short in it. Not enough to kill line, but, when the 90 volts a.c. comes in to ring it jumps short. The short answers the phone.. It doesn't stop out going but can cause static. Check the line at the box outside. if bad there call your phone company, if good there, trouble is in house

Uniden DECT 6.0... | Answered on Oct 04, 2017 | 958 views


Try Googling (uniden)(model)(manual) without parens for information.

Uniden DECT 6.0... | Answered on Sep 04, 2017 | 97 views


My phone is only ringing once before going to voice mail.How can I increase the rings to 3 rings

Uniden DECT 6.0... | Answered on May 06, 2017 | 546 views


it could that the battery is not keeping a charge. or the land line is bad. change battery first. sometimes new batterys are bad.

Uniden DECT 6.0... | Answered on Mar 28, 2017 | 103 views


when you have a problem with anything under warranty, you take it back for new units or a refund and anything under 12 months old is under warranty
if you have lost the receipts get a copy of your bank statements as that shows where it was bought , how much it cost and when
That is a legal document to trigger a warranty action or refund

Uniden DECT 6.0... | Answered on Mar 10, 2017 | 1,001 views


Block an Incoming Call
  • Wait until your phone rings and displays the caller ID information
  • Press the "Block" button on your handset.
  • Press "Menu/Select" or "Block" to confirm your decision.
Block in Standby Mode
  • Press the "MENU" button on your phone's handset.
  • Press the down arrow button to select "Call Blocking." Choose "Create New," "Private Number" (block private calls) or "Unknown Number" (block unknown numbers) from the list.
  • Enter the 10-digit phone number, if creating a new entry. Otherwise, press the "Menu/Select" button to confirm your choice.
How Do Block Calls on Uniden DECT 6 0 eHow

Uniden DECT 6.0... | Answered on Dec 12, 2016 | 1,229 views


no only the phone company can do that .

Uniden DECT 6.0... | Answered on Jul 06, 2016 | 64 views


it is not in the programming to accept calls while you are talking to another . most land line phones only have 2 settings on number of rings before the machine picks up .

Uniden DECT 6.0... | Answered on Jul 06, 2016 | 77 views


Without the model number of your Uniden phone, I don't know which silencing feature you are dealing with.

Some Uniden handsets have a Silent Mode. To toggle this on and off, press and hold the # key (below 9) for 5+ seconds when the phone isn't in use. When the silent mode is enabled, the handset will ask for a length of time for the 'no-ring' option. If no key is pressed, then the Silent Mode will continue until the # key is held again.

Other Uniden phones have Do Not Disturb. The button to enable/disable this will be on the cordless phone base. The answering system will automatically turn on and none of the handsets will ring when this feature is enabled.

You can also set the ringer volume to zero. Depending on the phone, you can reset this by pressing the volume up/down buttons or going through the menu. Look for the Ringer Volume in the same section of the menu as the Ring Tone options.

If you need additional information, please add a comment with the model of your phone. I hope this helps.

Cindy Wells

Uniden DECT 6.0... | Answered on Jun 13, 2016 | 76 views


You might try to reset the Voice Mail Waiting Indicator ( V M W I ).

To reset the Voice Mail Warning Indicator
on the D1680 and similar handsets:

1. press [menu]
2. scroll down to "Global Setup", press [select]
3. scroll down to "VMWI Reset", press [select]
4. scroll down from "No" to "Yes", press [select]
5. handset will chirp, blinking lamp goes out,
6. press [END]

Other models, check your manual. The model number
is on a small sticker under the battery in the handset --
enter this number at www.manualslib.com to get a free
copy of the User's Manual.

Good luck!
---------------

Uniden DECT 6.0... | Answered on Jun 13, 2016 | 189 views


For the Uniden model D1680 & similar...

You ENTER "Silent Mode" by pressing and
holding the [ # ] key on the handset for a few
seconds until the display reads "Please Wait".
It will (chirp) and display "Silent Mode ON".
You can EXIT "Silent Mode" by pressing and
holding the [ # ] key on the handset for a few
seconds until the display reads "Please Wait".
It will (chirp) and display "Handset #".

Another easy way to end "Silent Mode" is to go
to the BASE and press the [ANS ON/OFF]
button to turn off the answering machine system.
(Push the [ans] button, do not unplug the power)

"Silent Mode" will clear a moment later while the
control voice tells you "Answering System is OFF"
Now you can again turn on the answering machine
system as desired.

Good luck!
------------

Uniden DECT 6.0... | Answered on Jun 13, 2016 | 58 views


For the Uniden model D1680 & similar...

You ENTER "Silent Mode" by pressing and
holding the [ # ] key on the handset for a few
seconds until the display reads "Please Wait".
It will (chirp) and display "Silent Mode ON".

You can EXIT "Silent Mode" by pressing and
holding the [ # ] key on the handset for a few
seconds until the display reads "Please Wait".
It will (chirp) and display "Handset #".

Another easy way to end "Silent Mode" is to go
to the BASE and press the [ANS ON/OFF]
button to turn off the answering machine system.
(Push the [ans] button, do not unplug the power)

"Silent Mode" will clear a moment later while the
control voice tells you "Answering System is OFF"
Now you can again turn on the answering machine
system as desired.

Good luck!
------------

Uniden DECT 6.0... | Answered on Jun 13, 2016 | 398 views


http://www.brandsmartusa.com/pdfs/manuals/20146396.pdf

The above link is the manual. I was looking at pgs 15, 16, and 18. On pg 18 it says there is a default code that will retrieve messages you enter from phone, that's probably it I think. Download is 12.8mb.

Uniden DECT 6.0... | Answered on Jun 09, 2016 | 133 views


That might be the Voice Mail Waiting Indicator.
On the D1680 and similar handsets, it is reset by:

1. press [menu]
2. scroll down to "Global Setup", press [select]
3. scroll down to "VMWI Reset", press [select]
4. scroll down from "No" to "Yes", press [select]
5. handset will chirp, blinking lamp goes out,
6. press [END]

Other models, check your manual. The model number
is on a small sticker under the battery in the handset --
enter this number at www.manualslib.com to get a free
copy of the User's Manual.

Good luck!
---------------

Uniden DECT 6.0... | Answered on May 27, 2016 | 63 views


Your manual is accessed from here. It is usually fairly complicated from options on the handset.



Owner Manuals

Uniden DECT 6.0... | Answered on Apr 11, 2019 | 133 views

Not finding what you are looking for?
Uniden DECT 6.0 Cordless Telephone Expansion Handset Logo

1,615 questions posted

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

k24674

Level 3 Expert

8081 Answers

Cindy Wells

Level 3 Expert

6063 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...