20 Most Recent Motorola Mint Radius Cp200 Uhf 4ch Radio Questions & Answers


The battery is no longer taking a charge properly and needs to be replaced.

Motorola Mint... | Answered on Dec 02, 2017


Typically when the charger flashes red you have one of the following conditions:
1) The battery is simply too low to charge. Leave it on the charger for a few hours to see if it resolves. If it is a new battery return the battery for a replacement.
2) Your battery is not making good connection. Clean the battery and charger contacts with a pencil eraser. Check your contacts in the charge itself to make certain one isn't damaged or broken.
3) Your battery has an internal short. Test the battery on another charger to see if you get the same result. If so, replace the battery. 4) If you have a charger problem, the best test is to try another battery in the charger. Reminder: be certain the insert is turned the correct direction for the battery you are using.
Best regards.

Motorola Mint... | Answered on Jan 06, 2015


One possible problem is a bad battery. Try swapping batteries with a known good unit and see if the problem is solved. If it is not the battery, then your radio is likely in need of repair.

Best regards.

Motorola Mint... | Answered on Nov 18, 2012


Your radio is in need of repair. Typically you can find flat rate repair for the CP200 style radio for around $85. You may have a bad speaker, or other internal issue.

Best regards.

Motorola Mint... | Answered on Sep 05, 2012


Long press P3 and check key sign will be goes OFF, now your keypad is unlock.

Motorola Radio... | Answered on Nov 03, 2019


Hi there,

please, try long press P2 button, to unlock your radio,
and re-try,

Thank you,


With Regards,
jack

Motorola Radio... | Answered on Nov 03, 2019


It requires the radio programming program. You must take it to a dealer. It will cost a bit to be reprogrammed, call in advance.

Motorola Radio... | Answered on Oct 04, 2019


Entering Front Panel Feature and Button
Configuration Mode
If your radio is turned ON, turn it OFF. Press and hold the side
programmable button 1, and turn your radio ON. A tone is
heard, indicating that your radio is in Feature and Button
Configuration Mode. The indicator illuminates and the
"BCKLIGHT" is displayed on the radio LCD screen.

Whenever the radio is turn on, it initiates a self-test routine which checks the RAM, EEPROM
hardware and EEPROM checksum. If Self Test passes, the green LED flashes once and a Self-Test
Pass Tone is generated. If unsuccessful, the red LED flashes rapidly and a Self-Test Fail Tone is
heard

You may need the programing software to do the reset the manual does not give you any info on resetting the radio

Motorola Radio... | Answered on Oct 03, 2019


No. Your Talkabout radio operates on UHF and your wife's walkie talkie is a VHF radio operating on exclusive business frequencies.

Motorola Radio... | Answered on Sep 26, 2019


Hi PC Bedwell, check the battery charge, it may be needing to be replaced, likewise, control the charger
I hope you can solve the problem
Regards Franco Dosil

Hola PC Bedwell, comprueba la carga de las bater?as, puede estar necesitando ser reemplazadas, de igual manera, controla el cargador
Espero puedas resolver el problema
Saludos Franco Dosil

Motorola Radio... | Answered on Sep 20, 2019


Check your Private Line (aka interference eliminator code, tone code, PL, quiet call). It sounds like you have one radio set with a PL setting and the other one is open squelch (no private line). All settings for frequency and PL code need to be the same between the two radios.

We don't have a manual for the T3, but I am attaching one for the T5, which may be similar. http://www.motorola.com/web/Business/Products/Two-Way%20Radios%20-%20Unlicensed/_Documents/TLKR-T%20series/Static%20Files/T5%20Manual%20EU.pdf

Best regards.

Motorola Radio... | Answered on Aug 31, 2019


The CLS has preprogrammed frequencies. The Bao can be user programmed. If both are Uhf, the Bao must match the CLS unless one of the CLS frequencies is already in use in the Bao. So, are you already using CLS and adding radios? You need the actual frequency and tone code. If you do not understand, contact a dealer like us, local is even better! Channel 1 is only an indicator, not a frequency. radiodude365@yahoo.com

Motorola Radio... | Answered on Jun 16, 2019


Turn off your CTCSS or DTS functions. You will have to go into the set up menu for this.

Motorola Radio... | Answered on Jun 04, 2019

Not finding what you are looking for?
Motorola Mint Radius Cp200 Uhf 4ch Radio Logo

5 questions posted

Ask a Question

Usually answered in minutes!

Top Motorola Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1655 Answers

Anthony Ward
Anthony Ward

Level 2 Expert

397 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Motorola Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Motorola Radio Communications

  • Motorola Radio Communications

Most Popular Question

motorola radius cp200 flashing yellow

  • Radio Communications
Loading...