20 Most Recent Whirlpool Ultimate Care II LSQ9564J Top Load Washer Questions & Answers

Whirlpool AWM312/3 Front Loader Washing Machine - not spinning

I would recommend getting the service manual for your model as some models have clutches that control spin and others have belts. The service manual would be the best route if you are planning on repairing this yourself. If you would like the service manual let me know and I will post a link to where you can get one emailed to you.

Whirlpool... | Answered on Sep 10, 2018

1 Answer

Why does the washer set on normal go into the extra rinse but doesn't spin dry? (Extra rinse switch not on)

You will need to replace the timer. Here is the part to order.

Whirlpool... | Answered on Feb 04, 2018

1 Answer

I keep getting a 17755 error code on vag com

Have you cleaned the water filter out and checked the waste hose first? Make sure you only use a quality detergent as cheap pound shop stuff can rot the sensors, and foul up the camshaft.

Whirlpool... | Answered on Feb 04, 2018

1 Answer

I have a Whirlpool Washing Machine, Ultimate Care II (LSQ8243H). The machine fills with water and agitates but, when it gets to the spin cycle it stops. Water will not pump out. Tried moving timer d

indicates a problem in the timer control
that type of controller suffers from burnt points
have a technician check it out and replace it

Whirlpool... | Answered on Dec 14, 2017

6 Answers

Whirlpool Ultimate Care HD Plus Model #LSR8233EQ0 won't agitate or spin

It sounds like the coupling between the motor and gearbox has worn out. It should cost around $15 plus shipping and handling.

Whirlpool... | Answered on Nov 01, 2017

1 Answer

Whirlpool ultimate care II quietwash filling with water during spin cycle

sounds like the valve again

Whirlpool... | Answered on Oct 26, 2017

0 Answers

Whirlpool ultimate ii washer belt replacement

Whirlpool... | Posted on Oct 10, 2017 | Be the first to answer

1 Answer

During the normal cycle the timer control knob

If timer doesn't move through entire cycle, timer is bad. Only exception to that is if lid switch is bad.

Whirlpool... | Answered on Sep 09, 2017

0 Answers

Porcelain drum starting to rust

Whirlpool... | Posted on Aug 31, 2017 | Be the first to answer

1 Answer

Whirlpool top loader washer ultimate care 2 quiet

Sounds like a lid switch problem

Whirlpool... | Answered on Aug 23, 2017

0 Answers

Whirlpool Easytronic Washing Machine

Whirlpool... | Posted on Jun 24, 2017 | Be the first to answer

0 Answers

Whirlpool ultimate care II top won't agitate and when it comes time for the spin cycle it stops working all together and just hums. Why?

Whirlpool... | Posted on May 15, 2017 | Be the first to answer

0 Answers

Washing machine won't drain

replace the lid switch. that's what i have to do with mine. i researched it a few weeks ago. Simple cheap fix - i think it was about $20

Whirlpool... | Answered on Mar 09, 2017

3 Answers

I have an lsq9010 and it won't spin, it just makes

Hi,
The problem might be motor is short circuited kindly replace the motor to solve your problem

Whirlpool... | Answered on Jul 23, 2016

1 Answer

Want fully spin out clothes

usually a transmission problem or program is not setting it to final spin which is higher speed

Whirlpool... | Answered on Jan 18, 2016

1 Answer

I load washer it starts the wash cycle it goes through wash cycle fine drains water but does not collect water for rinse cycle it just idles. So I turn knob to spin and it spins until done.

If it doesn't fill for the rinse, I would say that the cold inlet valve has failed. Check that the cold tap is turned on and check when the machine fills for the wash cycle and see if it is taking hot or cold water. You will probably find that it is filling only with hot water. A local spares store should have the valve you need.

Whirlpool... | Answered on Sep 19, 2015

1 Answer

Wash started cycle. Wife stopped it at beginning of cycle. Now washer will not start at at. Lid switch is good. Will not spin, rinse, restart wash, nothing, not even clicking.

Does unit have a reset button? If it has manual control for cycle did you try going clockwise to the start position and then restarting?

If she stopped the cycle by opening the door perhaps that switch is still stuck in an open position.

Whirlpool... | Answered on Aug 31, 2015

Not finding what you are looking for?

Popular Tags

1,616 questions posted

Ask a Question

Usually answered in minutes!

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Whirlpool Ultimate Care II LSQ9564J Top Load Washer? Or just drag it here!

View Most Popular

Whirlpool Washing Machines

Whirlpool Washing Machines

whirlpool awm312 3 front loader washing

Washing Machines

20 Most Recent Whirlpool Ultimate Care II LSQ9564J Top Load Washer Questions & Answers

Whirlpool AWM312/3 Front Loader Washing Machine - not spinning

Why does the washer set on normal go into the extra rinse but doesn't spin dry? (Extra rinse switch not on)

I keep getting a 17755 error code on vag com

I have a Whirlpool Washing Machine, Ultimate Care II (LSQ8243H). The machine fills with water and agitates but, when it gets to the spin cycle it stops. Water will not pump out. Tried moving timer d

Whirlpool Ultimate Care HD Plus Model #LSR8233EQ0 won't agitate or spin

Whirlpool ultimate care II quietwash filling with water during spin cycle

Whirlpool ultimate ii washer belt replacement

During the normal cycle the timer control knob

Porcelain drum starting to rust

Whirlpool top loader washer ultimate care 2 quiet

Whirlpool Easytronic Washing Machine

Whirlpool ultimate care II top won't agitate and when it comes time for the spin cycle it stops working all together and just hums. Why?

Five year old whirlpool Cabrio top loading washer.

What is the capacity for whrilpool SM8525079

Rust discovered along the holes in the drum of my washer

Washing machine won't drain

I have an lsq9010 and it won't spin, it just makes

Want fully spin out clothes

I load washer it starts the wash cycle it goes through wash cycle fine drains water but does not collect water for rinse cycle it just idles. So I turn knob to spin and it spins until done.

Wash started cycle. Wife stopped it at beginning of cycle. Now washer will not start at at. Lid switch is good. Will not spin, rinse, restart wash, nothing, not even clicking.

Not finding what you are looking for?

Popular Tags

Ask a Question

Popular Products

Whirlpool Duet GHW9150P Front Load Washer

Whirlpool Cabrio WTW6600SBT Top Load Washer

Whirlpool Ultimate Care II LSQ9549L Top Load Washer

Whirlpool Calypso GVW9959K Top Load Washer

Whirlpool LSR5132PQ Top Load Washer

Top Whirlpool Washing Machines Experts

Marvin

Gerry Harvey

jimorris77

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

Whirlpool Washing Machines

whirlpool awm312 3 front loader washing