20 Most Recent Whirlpool GU2400XTP Built-in Dishwasher - Page 3 Questions & Answers


you can repalce the seal, you need to remove the motor to replace the seal(8268397) since your already there id relace the impeller kit(8193951) and the voloute(8531019) as well. looking about 65 bucks in parts

Whirlpool... | Answered on Jun 26, 2015


The main board sends power to the display lights. Check with a multimeter for voltage coming out of the main board to the display board. If no voltage the main board is bad or the fuse is bad.

Whirlpool... | Answered on Mar 05, 2015


You start by describing the exact problem you're having. Your question is like "How do I fix my car?" You go to college or a trade school for 2 or more years to learn how to fix your _________ (fill in the blank).

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

Whirlpool... | Answered on Feb 25, 2015


No, it's not normal for them to be soaking wet at the end of the cycle, but there are things that can affect this. First, make sure you have Heated Dry selected. Next, make sure you are using rinse-aid (Jet Dry), because the new dishwashers don't use as much heat as the older dishwashers, and Jet Dry will greatly aid in the drying. Be aware that plastics won't get dry in any dishwasher. Other things you can do is turn on the extra heat options in the wash cycle, and turn on the Sani-Rinse option (if you DW has such options). Otherwise, you may have a heater or controller problem.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

Whirlpool... | Answered on Feb 25, 2015


Try throw the breaker off for 15 min then back on. That may clear the program. If not restart it on the "wrong" cycle and let it finish out.

Whirlpool... | Answered on Feb 20, 2015


Whirlpool dishwashers use a wax motor or a solinoid to release the door at a specific time during the cycle. So for proper cleaning the soap cup is nessesary . The part isn't that expensive and fairly simple repair.

Whirlpool... | Answered on Dec 31, 2014


there should be a white type screw that goes in the middle and scews into the middle

Whirlpool... | Answered on Dec 14, 2014


Replacement parts for this type of dishwasher can be found on amazon. here: Amazon com Whirlpool Gold quiet partner III parts (You can ask sellers for particular problem, they know the best.) I hope this was helpful. Cheers

Whirlpool... | Answered on Dec 03, 2014


I held down the heated dry button & it worked!

Whirlpool... | Answered on Sep 24, 2014


Check the power supply. Check the fuse located on the control panel

Whirlpool... | Answered on Aug 31, 2014


hi
you can if they made that model in stainless steel

Whirlpool... | Answered on Jul 30, 2014


At least five years.

Whirlpool... | Answered on Jul 23, 2014


remove front lower panel below door. paper with spec's and diagnostic procedures and codes should be there. is water on?
cause water valve can buzz if water no turned on under sink.

Whirlpool... | Answered on Jun 28, 2014


check carefully around the locking lever assys., both on the door and on the unit itself; looking for bent/cracked/damaged/obstructed housing or possible safety switch on assy. defective.

Whirlpool... | Answered on Jun 16, 2014

Not finding what you are looking for?
Whirlpool GU2400XTP Built-in Dishwasher Logo

1,262 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Mike

Level 3 Expert

4367 Answers

Bruce Denton

Level 2 Expert

273 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Whirlpool Dishwashers

  • Whirlpool Dishwashers

Most Popular Question

warranty extensions

  • Dishwashers
Loading...