20 Most Recent Whirlpool 24 in. ADP5966 Free-standing Dishwasher - Page 5 Questions & Answers


Hello - Probably, but someone with basic electrical skills can check the wires in the power connection box under the unit. If these wires look good, the problem is best left to a pro. Some part of the circuit is grounding, causing breaker to trip. Finding out where is an on-site job. Let me know if this info helps- have more if needed. -Thanks- Ed

Whirlpool 24 in.... | Answered on Mar 11, 2010


Hello- The most likely suspect is a failing water valve. Part is 30-50$ Installation instructions available. Let me know if this info helps- have more if needed. -Thanks- ED

Whirlpool 24 in.... | Answered on Mar 08, 2010


How to unlock kirkland whirlpool dishwasher

Whirlpool 24 in.... | Answered on Feb 04, 2010


My dishwasher isnt working anymore after i cleaned the filters? i took out and cleaned the filters in it and now it doesnt seem to be working properly. it goes thru the cycle but its not cleaning. the dishwashing tablet falls to the bottom and isnt even dissolved completetly after the cycle has finished. is it possible that its blocked somewhere?
It is a Whirlpool ADP 5540
thanks for your help
**** the walls are still dirty after the cycle but there is steam in there as if its done its normal cycle

Whirlpool 24 in.... | Answered on Jan 07, 2010


Hi girijyo,

F8 means you have a blockage in your drainage pipe, try cleaning all the filters and the drains, then closed it up, held the start button until it restarted. let us know if this works.

Regards
R.K.

Whirlpool 24 in.... | Answered on Oct 21, 2009


changes r that the drain hose is clogged if your drain goes though your disposer take it loose there put a small bucket under it u may get a little sour water . usesomething flexible to fish up the drain tube also if you have install a new disposal check to make sure the plug has been knocked out haundi24

Whirlpool 24 in.... | Answered on Oct 17, 2009


You may want to check the power coming out of the power supply and leading to the circuit board. You should have about 13.5 volts. you can also test other components with the voltmeter and also an ohmmeter. I do also suggest testing the door latch switch with an ohmmeter to see if the resistance changes when you press the button. If you need to, you can get parts and manual at repairclinic.com

Whirlpool 24 in.... | Answered on Sep 22, 2009


hello mam
please change both male and female locks of the dish washer then it will works.

Whirlpool 24 in.... | Answered on Sep 17, 2009


You need a new water inlet valve. You are probably only getting half as much water as it takes to clean and properly rinse your dishes. Call or email us and we'll be sure to get the right part out to you right away.

Whirlpool 24 in.... | Answered on Sep 09, 2009


Make sure you get water to the dishwasher. Check to see if the water shut-off valve (located under the sink) is open. If you get water to the dishwasher, but there is still no water inside during the fill cycle, the problem might be with a faulty water valve (located at the bottom of the dishwasher, behind the kick panel, on either side), in which case replace the water valve.

Whirlpool 24 in.... | Answered on Aug 21, 2009


not getting the water in or could be timer

Whirlpool 24 in.... | Answered on Aug 03, 2009


Just moved dishwasher to another location across the room. Water connected fine, electrictiy connected fine. Turn on and you can hear pump going but that's it. No water going in?

Whirlpool 24 in.... | Answered on Jul 19, 2009


you have a water count problem
or a wv1 problem ist easy to solve

Whirlpool 24 in.... | Answered on Jun 30, 2009


If you take the left side panel off you will see a white plastic tank . The sensor in the tank has failed

Whirlpool 24 in.... | Answered on Jun 24, 2009


I had the same problem. Indicator flashing. F7 displayed. Nothing seems to work.
The following worked for me:
Remove the filter on the floor of the machine, including the metal grill.
Press & hold the start button (like you do when you want to cancel a programme). this will drain the water out of your clogged up drain outlet. Clean your filter and grill and replace it.

My guess is that the sensor in the drain (a little glass tube) measures whether the water going out is clean enough to decide that your dishes are now rinsed correctly. If your filter's clogged, the water going down the drain is still dirty. After a while it gets sick of trying and stops the machine.
F7 in whirlpoolese may mean "Clean my filter now or you can wash your own bloody dishes"

Whirlpool 24 in.... | Answered on Jun 08, 2009


I called an engineer who dismantled the pump and found a rawl plug in it. Now working fine again.

Whirlpool 24 in.... | Answered on Apr 15, 2009

Not finding what you are looking for?
Whirlpool 24 in. ADP5966 Free-standing Dishwasher Logo

209 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Mike

Level 3 Expert

4363 Answers

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Bruce Denton

Level 2 Expert

273 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Whirlpool Dishwashers

  • Whirlpool Dishwashers

Most Popular Question

electrolux dishwasher control panic

  • Dishwashers
Loading...