Top 20 Canon I-Sensys Mf4550d All-In-One Laser Printer Print, Copy And Scan Questions & Answers


To reset a Canon i-SENSYS MF device, it is necessary to contact the Canon helpdesk. They will arrange a callback to guide you trough the reset. The steps for a reset are not public and if you can find them on the web, it is not safe to try resetting the device on your own. When clicking on a wrong option, it can be that the device has to be send to service for repair afterwarts.

Canon I-Sensys... | 707 views | 4 helpful votes


Reset it how? If it is the page count, you can do that in the service menu. Generally, they do this for a reason and youcought to replacecthecfuser if it says you should!

Canon I-Sensys... | 196 views | 1 helpful votes


I would first take your toner out and shake it and see if this helps. Sounds like a defective cartridge and or transfer roller.

Canon I-Sensys... | 56 views | 0 helpful votes


Try turning the printer off and back on. If this does not work, try rebooting your computer. Another choice is to go to the Control Panel > Programs > Unistall a Program and delete the printer's software, reboot your computer and re-install the printer's softwre.
If this does not work, you can always return your printer for a full refund or ask them to exchange it for a new one.

Canon I-Sensys... | 179 views | 0 helpful votes


I had the same problem. It turned out my printer was set to print on the "Canon Fax" printer rather than the regular Canon printer. So I changed the printer on the print box screen and was able to print as usual.

Canon S Office... | 1,010 views | 0 helpful votes


Hi Jonatas Bila, I want to help you with your problem, but I need more information from you. Can you please add details in the comment box?

Canon S Office... | 305 views | 0 helpful votes


Internal battery needs replacement

Canon S Office... | 94 views | 0 helpful votes


Disconnect the printer and turn it upside down. And shake it a few times Maybe there is a foreign object in the paper path

Canon Office... | 324 views | 1 helpful votes


Can you remove the ink from the printer then power it off.
then using a Q-Tip with cleaning alcohol (or warm water if you do not have any), clean out the areas where the ink goes in.
Then use a damp cloth and wipe down the inside of the printer.
Once done, let it dry for 10 minutes
Then put the ink back in, power it on and tell me if it then prints correctly please
This will also allow you to see if any foreign objects are in the printer which may cause this.

Canon Office... | 205 views | 0 helpful votes


Code E001-0001
The sub thermistor detected an abnormally high temperature (295 deg C) during temperature control.
- Check the connector of the fixing film unit.
- Replace the fixing film unit.
- Replace the DC controller PCB.

Canon Office... | 93 views | 0 helpful votes


call....1-800-OK-CANON (800-652-2666) weekdays from 10am to 10pm (ET) for troubleshooting.

Canon Office... | 30 views | 0 helpful votes


I would recommend going to Canon. Com/support and look up your model number. You should be able to read and download the owner's manual there.
Hope that helps you. You might even need to download and install the software again.( the manual should be included) mine first my Canon is.

Canon Office... | 27 views | 0 helpful votes


That error indicates a temperature problem in the fixing unit. You need to enter in service mode and clear the error . If problem persist you need to replace the fixing heater

Canon Office... | 31 views | 0 helpful votes


Replace ink absorber pads

Canon Office... | 23 views | 0 helpful votes


Here are some of the reasons that this error occurs.
Causes of error code 6000 in your Canon Printer
The error can be noticed when the paper feed tray of printer obstructs its opening when something gets stuck in it. Things like dust particles or paper pieces usually get stuck in it.
This error code might also occur if you do not place the tray properly in the printer.
This error may also arise when we command the printer for multiple papers at a single time.
Another reason for the occurrence of this error is the presence of a lot of documents around the printer.
When the line feed gets scratched or smeared.
When there is any defect in the sensor unit or in-line feed slit.
When there are errors, there are solutions that come up to face these errors and fix them. Mentioned below are steps to fix the errors faced by canon printers.
Steps to fix the issue
The first step is to remove the plug of your printer from the power socket and wait for a few seconds, leaving it in the same pause mode.
Then put the power cord of your printer back in the socket and again switch it on.
You need to press and hold the "Power" button for a few seconds. Then click on the "Stop" button twice.
Follow this procedure for one or two more times.
Then release the "Power" button very smoothly.
Finally, click on the "Stop" button four times.
If you are unable to resolve the problem after following the above steps, do not leave hope. You can easily contact Canon Printer customer support +1-855-789-0253 for fixing Canon Printer error code 6000. Their highly-skilled customer representatives are available around the corner to attend all your issues and provide solutions for them. They check paper feed motor, timing slit disk film, feed roller, timing sensor unit, logic board, etc. to test each of the parts properly and see whether it is working or not. They are ready to replace any part of the printer that will be at fault.

Canon Office... | 23 views | 0 helpful votes


The Canon Printer Error Code 1401 occurs when the printer machine is not able to recognize one or all the cartridges installed in the machine. These errors show up in the form of messages such as "Fine cartridge isn't installed" for 1401 or fine cartridge isn't installed in a proper manner for 1687 message.Jan 7, 2019
www.printerstechnicalsupport.com > how-to-fix-canon-printer-error-cod...

How to Fix Canon Printer Error Code 1401 ' Printer Technical ...

Canon Office... | 22 views | 0 helpful votes


1.If you are using the multi-purpose tray, close it.
2.Open the front cover while pressing the open button.
3.Remove the toner cartridge.
Immediately place the removed toner cartridge into the original protective bag or wrap it with a thick cloth.
4.Holding the green tab (A), tilt the transport guide toward you.Do not take your hands off the transport guide until it moves back to its original position in Sep 6.
5.Remove the paper by pulling it gently.
Remove the jammed paper as horizontally as possible to prevent unfixed toner from spilling.
6.Move the transport guide back to its original position slowly.
7.Install the toner cartridge.
Push the toner cartridge into the printer firmly until it touches the back of the printer while aligning (A) on both sides of the toner cartridge with the toner cartridge guides inside the printer.
8.Close the front cover.

Canon Office... | 31 views | 0 helpful votes

Not finding what you are looking for?
Canon I-Sensys Mf4550d All-In-One Laser Printer Print, Copy And Scan Logo

21 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

S Canon

  • S Canon

Most Popular Question

reset fuser canon mf4550

  • Office Equipment & Supplies
Loading...