Questions & Answers
Error 0176 ibm
Lots of issues with 0176 error. Could be caused by a dead cmos battery or the system thinks it has been tampered with. I found a couple of clues for you;
The T41 Hardware Maintenance Manual gives the following instructions in case of error 0176:
"Run BIOS setup utility, and save the current settings by pressing F10."
To get into BIOS, you need to press the F1 key when you see the splash screen. I suppost that the splash screen on a T41 will display a ThinkPad or IBM logo, and something similar to "to interrupt normal start procedure, press the blue thinkvantage button".
The idea that a new motherboard might be necessary comes from the T41 Hardware Maintenance Manual. It says that in case the first instruction, i.e. get into BIOS and save current settings, doesn't fix the problem, a new motherboard should be installed.
You could try the following:
Disconnect the AC adapter from the notebook, disconnect all other cables. Remove the battery pack. Press the power button ten times in one-second intervals. Then press the power button again, and hold it pressed down for 30 seconds. Then install the battery pack again, connect the AC adapter. Press the power button.
Re: 0176 Security - The system has been tampered with
The padlock came up after removing the BIOS-battery. It is a security-feature and cannot be bypassed.
Removing the BIOS battery does not remove the supervisor-password but locks the system, if one hat been set to protect the computer from illegal use.
So either try to get the SVP from the previous owner ore replace the board.
893 views | 0 helpful votes
Tally45 password forgotten
Which Password? Bios Password?Hard Drive Password? Windows Welcome Screen User Logon Password?
Which Operating System? Windows XP? Windows Vista?Windows 7?OK,if you are running Windows 7, Microsoft tightened security on it so you've gotto have a password reset disk which 99% of the people who own laptops withwindows 7 fail to do. It should be one of the first things you do whenyou buy the laptop. Otherwise, you're faced with reinstalling theOperating System or possibly doing a System Recovery.
If you're on Windows XP or Vista try this:
Turn off the computer, then hit the power button to turn it back on andimmediately start hitting the F8 key repeatedly until you see the Safe Modeoption. Select SAFE MODE and let the computer boot up. When it getsto the User Login screen it will show the Administrator userid and the useridfor which you forgot the password. Sign in as the Administrator(hopefully you didn't put a password on it and forgot it too). Once thedesktop appears it will look different, the screen will be darker and the iconsbigger, but this is normal for safe mode.
Click Start/Control Panel/User Accounts
When the User Accounts screen opens, click on the userid for which you forgotthe password. Select the option to REMOVE PASSWORD.
Reboot your machine.
59 views | 0 helpful votes
Forgotten password to open tally45
This is a problem the only way to deal with this is to try to input until you can access your computer. Also if it is a Win 7 loaded computer you can look at the password hint section. Also for everyone it is advisable to make a password reset disk in case this does happen. Also you can completely re load your software if you cannot access the computer. This will give you back your operating system.
There is special software programs out there that will crack your password because there is so many of them I would not even attempt to share a link. I also highly recommend typing out the password in small readable print it out and cut it neatly and tape it with scotch tap under the DVD-R or CD tray when you open it right along the edge of the front lip.
Also use a password you will never forget use small caps only. John
54 views | 0 helpful votes
I have IBM thinkpad R60
Please follow these steps to make it work:
1. Uninstall the wireless driver using Add/Remove Programs
2. Uninstall the
Hotkey utility using its Setup program (uninstall is an option in the Setup app;
it doesn't appear in Add/Remove Programs control panel)
Delete the Hotkey folders from C:\Program Files\Lenovo\PkgMgr [key step!]
Reinstall the Hotkey Utility and the wireless driver (don't reboot if
276 views | 0 helpful votes
How to turn on the
1. There is a switch on the front left hand side of the laptop, just shift that to the right and will turn the wireless adapter on.
2. There is also a shortcut you can use, hold FN button and press F5. This will bring up the wireless/bluetooth menu, and you can turn it off/on from here as well.
3,764 views | 7 helpful votes
I have tried everything to
This is caused by the UAA driver that must be upgraded before attempting to install the audio driver. Download and install this
it's the official Microsoft fix , then reboot twice then install your correct driver.
BTW the audio chip is ok and cannot be replaced if it fails.
111 views | 0 helpful votes
Not finding what you are looking for?