Hunter 21871 56'' Ergonomic Brushed Nickel Ceiling Fan - Answered Questions & Fixed issues


Contact Hunter. There may be an alternate code for the remote

Hunter 21871... | Answered on Jan 07, 2018 | 74 views


Purchase the remote control, install batteries, and try it before taking anything apart. If the new remote control does not work, the internal receiver may have failed.

Hunter 21871... | Answered on Dec 07, 2017 | 124 views


Fan is not made anymore.

Hunter 21871... | Answered on Jun 06, 2013 | 214 views


You have to get the correct receiver for that fan. There's no such thing as a universal remote,no matter what it says on the box. Call 1-888-830-1326 and you can order your correct part.

Hunter 21871... | Answered on Jan 23, 2013 | 1,021 views


you need to change frequency see= www.ceiling-fans-n-more.com/c...e-controls.php hunter technical support-- 1-888-830-1326, good-day !!

Hunter 21871... | Answered on Aug 11, 2011 | 371 views


hi mebes76...
Go to this webpage and move your cuser over "Support"...in the drop down window go to "Manuals & Parts Guide.
Find your part, order your part directly from Hunter.
Please take time to rate me

http://www.hunterfan.com/

Hunter 21871... | Answered on Aug 05, 2011 | 124 views


there is a watt governor, or black box for the lights to cut down on wattage or energy use. you can remove the black box for the lighting, and wire it directly to the main wires. white wire to white wire, and black wire to red wire. black and red are always a hot wire and white is a neutral wire. the part number on black box should be 98480-02. this should stop the lights from blinking. have a good day !

Hunter 21871... | Answered on Jun 08, 2011 | 1,196 views


I'm trying to do just that right now...looking fir a little help with wire color identification. I'll advise you if I have luck.

Hunter 21871... | Answered on May 10, 2011 | 488 views


have no choice but to buy the original receiver through hunter - not a replacement from HD or Lowes - it will not work.

Hunter 21871... | Answered on Mar 05, 2011 | 422 views


if you look at the mount bracket where the ball of the fan fits in to it should fit right above the ball in the mount bracket and if it can fit loose in the canopy thats ok to just long as ou can get the bell housing back up

Hunter 21871... | Answered on Jan 23, 2011 | 400 views


Hunter 21871... | Answered on Aug 27, 2010 | 1,652 views


the light switch has gone faulty all you can do is change this switch

Hunter 21871... | Answered on Aug 07, 2010 | 77 views


mcdevito75 here, Both the fan and lights work off the wall switch, for the fan to work there is also a pull chain close to the ceiling on the fan shroud you have to pull that chain to get the fan going and 1--2 more times for various speeds. If by chance the fan is brand new, reove the blades and check for stops in the fan motor, right where the blades hook up, these are in place from the factory and have to be removed for the fan to work, they pull right out.

Hunter 21871... | Answered on Jul 27, 2010 | 146 views


You just need to wrap it and tuck it .. You might need to cut some of the fan wires shorter so there is not so much bulk under the canopy cover. The fans are shipped with enough wire leads to be able to use a down rod, They can be cut shorter when the fan is being installed.

Hunter 21871... | Answered on May 06, 2010 | 212 views


Most likely the remote problem is some kind of radio frequency interference. If the main problem is that they turn on when you don't want them on, then you could rewire or just put an extra switch that would turn off the power to the fan completetely. Then you would turn that switch on and use the remote only when you wanted it to run. This would be an extra step, but it would save you buying another fan.

You also might contact Hunter and see if they could send you a regular switch.

Hunter 21871... | Answered on Oct 19, 2009 | 406 views


I had the same problem and I thnk Hunter Fan knows about it....I just called Hunter Tecnical Support at 901-745-9222 and they sent me a new White circular receiver which goes inside of the canopy and it worked fine after installing the receiver....

Hunter 21871... | Answered on Jun 09, 2009 | 816 views


i don't know. battery may be dead in remote or in wrong way. please check batteries. if all tests ok, consider another remote at <https://www.ebay.com/itm/Hunter-Universal-Ceiling-Fan-Remote-Black-Receiver-K5579-01-NEW-/383158875857>

Hunter Dryers | Answered on Oct 29, 2019 | 61 views


Hunter would be a possible source.

Hunter Dryers | Answered on Oct 08, 2019 | 49 views


If remote and receiver is rated for fan load then this should be possible. Will need to replace remote and sensor units as 3rd party remote may not be compatible with the Hunter type.

Hunter Dryers | Answered on Oct 03, 2019 | 50 views

Not finding what you are looking for?
Hunter 21871 56'' Ergonomic Brushed Nickel Ceiling Fan Logo

Popular Tags

31 questions posted

Ask a Question

Usually answered in minutes!

Top Hunter Dryers Experts

Joe Paxton

Level 1 Expert

9 Answers

Paul Bade

Level 3 Expert

1662 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Hunter Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...