Top 20 Krups Small Appliances Espresso Machine Questions & Answers


E8050 does not exist in the Krups info I have, EA8050 does though. You need to remove the tamping piston and unhook all the wires from off the PCB on the side. Then the boiler assembly is attached to the base with 3 screws. This will allow you to tip the boiler over enough to get access to the screw up through the bottom that holds that plastic flange thing on the bottom of the ejection rod while you at the same time have another screwdriver in the screw from the top into the only screw that you see inside the boiler. One of the screws will come undone, it doesn't matter which one. That will allow you to remove the shaft that the seal you are trying to replace fits around. It is called a Barista seal part number MS5015004

Krups Small... | 72 views | 0 helpful votes


The hose connected to the heating element has unattached or is leaking.

Krups Small... | 214 views | 0 helpful votes


The best thing you can do is find the receipt and exercise the guarantee. The problem you have is not a simple fix.

Krups Small... | 395 views | 0 helpful votes


It's not a job for the faint hearted on one of those machines. The 2 places most likely to be leaking are the barista seal on the bottom of the boiler or the distributor which is a motor driven tap that sends the water from a single pump to do various functions. There are also various hoses in there that are under high pressure and can fail in an instant. I have just read the error codes and it seems that the barista seal is going to be the LEAST likely cause of the leak but I would replace it during the process if you are going to have that area close to being apart.

Krups Small... | 235 views | 0 helpful votes


That model is ancient, you are going to be scratching to find a handbook for one of those things. You may be better to ask specific questions relating to what operation of the machine you don't understand. They make good coffee, were relatively reliable and now any parts you may need are now obsolete.

Krups Small... | 579 views | 1 helpful votes


Error 6 means machine thinks it has a leak in one or more of the following
1) Distributor
2) Thermoblock
3) Pump valve
4) Pipe leakage
Repair will involve specialised tools and parts, not really the sort of job to attempt yourself. Contact Krups and get from them contact information for your local service agent.

Krups Small... | 602 views | 0 helpful votes


Pompano Beach, Florida 33060, Service and Repair Krups Service Centers' mission is to fulfill our manufacturer's legal warranty obligations, to ensure the repair of your Krups product even when the warranty period is over, and also to give you good helpful advice.
ARKANSAS
Vanness, Inc.
11610 Pleasant Ridge Rd Ste 106
Little Rock, AR 72223
Phone: 501-353-2362
CALIFORNIA
CES Concord (Northern California)
1170-G Burnett Ave.
Concord, CA 94520
Phone: 925-827-1011

CES Covina (Southern California)
612 S. Shoppers Lane
Covina, CA 91723
Phone: 949-586-9479

CES Lake Forest
22500 Muirlands Avenue Suite B
Lake Forest, CA 92630
Phone: 949-586-9479
Website: www.californiaelectricservices.com

Appliance Sales & Service
840 Folsom Street
San Francisco, CA 91407
Phone: 415-777-5144
Fax: 415-495-5141
Website: www.thegourmetdepotco.com/krups/

COLORADO
Nelson Appliance
1220 E. Filmore St.
Colorado Springs, CO 80907
Phone: 719-635-1928
Website: www.nelsonappliance.com

NEW YORK
Turnpike Appliance
3495A Lawson Blvd.
Oceanside, NY 11572
Phone: 516-486-5700
Website: www.smallappliance.com

UTAH
eReplacementparts.com
7036 South Tech Dr. 185 West
Midvale, UT 84047
Phone: 801-467-6361
Website: www.ereplacementparts.com

WASHINGTON
Action Small Appliance
14603 NE 20th, Suite 3,
Bellevue, WA 98007
Phone: 425-643-9806
Fax: 425-643-9834
Website: www.actionsmallappliances.com/



Note: XP7000 Series
Only the following Repair Centers:
Turnpike Appliance
Oceanside, NY

Vanness, Inc.
Little Rock, AR

Nelson Appliance
Colorado Springs, CO

CES Concord
Concord, CA

CES Covina
Covina, CA

CES Lake Forest
Lake Forest, CA

Krups Small... | 205 views | 1 helpful votes


Are you saying that you have this situation?
1. you have a K-cup machine that stopped working.
2. water is not being sucked up out of the water reservoir.
3. and no water is being pumped through the little K-cup

I don't know the answer, but am just trying to clarify your question, so that those who MAY know can better understand what you're asking. So, does that correctly describe your situation?

Krups Small... | 112 views | 0 helpful votes


http://www.manualsdrive.com/results.php?lang=en&search=KRUPS%20967B%2023097%20M

Krups Small... | 375 views | 0 helpful votes


There was no ejection switch pulse during 2x empty cycles. Inspect the switch or what activates the switch, check the wiring to the switch and PCB. Is the chamber clogged with grinds.

Krups Small... | 726 views | 0 helpful votes


Which valve where exactly, in the pump, in the tamping piston, in the distributor or somewhere else?

Krups Small... | 224 views | 0 helpful votes


You could try giving us a model number, there is more than one Krups Espresso maker. One error code 10 that springs to mind is either not heating or the sensor that detects the heat is detached, broken or disconnected.

Krups Small... | 187 views | 1 helpful votes


You need to specify model, they are not all the same.

Krups Small... | 145 views | 0 helpful votes


Yes the distributor is the most likely cause, if you have done the O rings in the hydraulic ram assy you should be capable of changing the distributor. The only other thing I have seen dump water to the tray is the valve on the end of the pump with the hose going back to the tray. You can pull the hose off at the tray end and run the machine to determine if that's where it's coming from. It won't be easy. I have an outer housing with lots of cutouts so I can observe inside while it's running.

Krups Small... | 117 views | 2 helpful votes


Good afternoon... On my krups machine and failure code appeared 8025 09. Said It was the temperature probe. I'd like to get a picture of the temperature probe and its cost. With the best regards
Joao Araujo

Krups Small... | 211 views | 0 helpful votes


This solution assumes you are trying to turn it off and it won't.
If it is a model like in the photo it could be as simple as a switch button, does it seem a bit looser than normal? If it's not that you may need to change the pcb on the left hand side.
If this solution does not help give some thought to supplying a model number and spend a bit more effort describing the fault.

Krups Small... | 30 views | 0 helpful votes


Replace that pressure valve and also inspect it for leaks from directly under the boiler, from that pressure valve and from the top of the hydraulic ram. If when you buy your valve you find the white housing will not fit where the old one came from you can just use the piston into your old housing. Check this before removing the hose clip from your old piston housing. If your old piston housing is leaking badly before you even do this job then you will need to replace the whole distributor as sometimes a piston housing retaining lug can fracture, there are 3 of them and they are part of the distributor.

Krups Small... | 252 views | 0 helpful votes


Look for leaks, it must be going somewhere.

Krups Small... | 51 views | 0 helpful votes


Take it in to your Krups service agent, something is going to need replacing and they are by no means a simple machine to work on. You will fix nothing from the outside, it will need to be pulled apart.

Krups Small... | 677 views | 0 helpful votes


Hi Porl, my answer was assuming that your machine is the product in the picture, if your machine looks nothing like the picture then ignore my answer. It is not easy to answer questions when no specific model information is supplied.

Krups Small... | 33 views | 0 helpful votes

Not finding what you are looking for?
Krups Small Appliances Espresso Machine Logo

298 questions posted

Ask a Question

Usually answered in minutes!

Top Krups Coffee Makers & Espresso Machines Experts

Pierre Laplante

Level 3 Expert

2042 Answers

Charles Tidwell

Level 3 Expert

475 Answers

Ray Murphy

Level 2 Expert

68 Answers

Are you a Krups Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Krups Coffee Makers & Espresso...

  • Krups Coffee Makers & Espresso...

Most Popular Question

manual krups il primo 972

  • Coffee Makers & Espresso Machines
Loading...