Frigidaire FEB27T6C Electric Double Oven - Answered Questions & Fixed issues


possible bad control board

Frigidaire Ovens | Answered on Jan 18, 2020 | 28 views


The F10 error can be caused by a faulty relay or electronic control board if the oven overheated while in use. If you unplug the range and the error occurs when the range is cool, then the over-temperature sensor has failed or the electronic control board is faulty. Even the wiring between parts could be faulty.

You need to check sensor and wiring. On some models, the oven temperature sensor probe can be accessed by opening the oven door. Look for two screws that are close together. Otherwise it's accessed from the back of the oven. It may be covered by an access panel. Unplug the wiring harness and check the resistance across the sensor with a multi-meter. It should give 1100 Ohms. Similarly check the wiring resistance from the probe to the control board. Also check the relay and that wiring. Replace the wiring, sensor or relay if those are faulty. Otherwise you need to replace the control board. The control board will be behind the console access panel. Somewhere on the back of the range, there will be a trouble-shooting sheet giving the wiring diagram and the expected resistance or voltage across the parts of the range.

I may be able be able to provide a parts diagram and price list for parts on your range. Please add a comment with the model number of the range for this information.

I hope this helps.

Cindy Wells

Frigidaire Ovens | Answered on Jan 04, 2020 | 39 views


The blinking light suggests heating element failure.

Frigidaire Ovens | Answered on Dec 10, 2019 | 66 views


Never ever use the Clean Mode. It breaks things, in your case over heating the fan. The clean cycle goes up to 650'F

Frigidaire Ovens | Answered on Nov 14, 2019 | 36 views


First take out the broiler pan, insert and any aluminum foil. Remove any other tools or pans from the oven. Next clean any large deposits in the oven cavity with hot, soapy water and a cloth. Clean the oven frame, the area outside of the door gasket and the very front center of the oven bottom with soap and water. Once you are ready to start the Self-Clean cycle, press the Self-Clean touch pad. To change the length of the Self-Clean cycle, press the pad again, as needed. Press Start. If you want to have the Self-Clean delayed, press the Delay Start touch pad after the Door Loc message appears. Type in the start time with the keypad.

To stop this cycle, press Cancel. If the oven is hot, the door will remain locked.

Frigidaire has most of their manuals available on their support site: http://b2b.frigidaire.com/support/manuals.asp . The current link to the English version of the Owner's manual is http://manuals.frigidaire.com/PDFnotFoundCheck.asp?path=ftp://ftp.electrolux-na.com/ProdInfo_PDF/&folder=Lassomption&PDFtype=Owner&PDFfile=318205312en.pdf&model=FGEW3045KFB . See pages 24-25 for this information.

I hope this helps.

Cindy Wells

Frigidaire Ovens | Answered on Nov 05, 2019 | 52 views


Possibly, the replacement EOC is defective.

Frigidaire Ovens | Answered on Oct 06, 2019 | 69 views


Check with a local repairman. He should be able to locate if it is still available.

Frigidaire Ovens | Answered on May 19, 2019 | 66 views


I know this isn't directly answering your question, however, what "burned up" about it?
You can get just about every part that fits that oven from Sears PartsDirect. Control boards, bake elements, convection fans, switches, replacement glass... just about everything.

Unless the oven literally burned through the side/top walls, you're most likely going to save money by fixing whatever's wrong with it.

Even the clock/timer control board is only $164 for the OEM part.

Frigidaire Ovens | Answered on Apr 18, 2019 | 79 views


Try the liquid that mechanics claim to do all. WD-40.

Frigidaire Ovens | Answered on Feb 12, 2019 | 162 views


cool down before it opens if you started the clean timer, f8 code, might be that its on a timer

Frigidaire Ovens | Answered on Jan 20, 2019 | 86 views


PRESS CLOCK THE USE UP/DOWN BUTTONS TO SET TIME THEN PRESS TIME AGAIN

Frigidaire Ovens | Answered on Jan 10, 2019 | 485 views


NO CLUE HERE BUT POSSIBLY THE CONTROL BOARD FAILED ON IT

Frigidaire Ovens | Answered on Dec 24, 2018 | 37 views


Let it cool down if still hit and Unplug it for a few minutes.

Frigidaire Ovens | Answered on Dec 21, 2018 | 36 views

Not finding what you are looking for?
Frigidaire FEB27T6C Electric Double Oven Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Ovens Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Bruce Denton

Level 2 Expert

273 Answers

Alan Chouinard

Level 2 Expert

52 Answers

Are you a Frigidaire Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...