20 Most Recent Canon MX300 Office All-In-One Printer Questions & Answers

See this video for solution for error code 5100:

Canon MX300... | Answered on Sep 12, 2019

Error no 5200 is caused by its temperature high.. to solve your problem follow the instruction given below::

1. Turn Off printer, cable power still plug in.

2. Press Stop/Reset button, don't release the button.

3. Press Power button by holding without release and than release Stop/Reset Button.

4. Press Stop/Reset button two times (2x) now release the Power Button.

5. Wait until service mode to zero (0).

6. Turn off the Printer, cable power still plug in.

7. Press Stop/Reset button, don't release it.

8. Press Power button don't release & than release Stop/Release button.

9. Press Stop/Reset button four times (4x), wait until service mode to "1"

10. Turn off printer, and loose cable power, wait for one (1) minute.

11. Connect cable power, turn on printer again, now this printer ready to use.

Canon MX300... | Answered on Sep 11, 2019

Try it works for most Canon
Hi you can try

  1. Turn on the machine
  2. Press MENU
  3. Press SCAN COPY SCAN to enter service mode
  4. USE > to got to NVRAM ACCESS
  5. Set ABS-M LEVEL to 0
  6. Set ABS-P LEVEL to 0
  7. Press STOP to EXIT
All The Best: Pineworks

Canon MX300... | Answered on Mar 27, 2018

You might try a hard reset of printer along with uninstalling and reinstalling the software for the printer.
If nada, you might give Canon a call and ask their techies for their feedback on situation.

Canon MX300... | Answered on Jun 19, 2017

on the test print paper there should be a set of numbers there (prints automatically after align print head is done), these will need to be added into the prompt that comes up in screen after "set value" shows up, but unless a major rebuild has just been done to machine I find this is rarely needed to be done < I just select skip or done to exit that mode

Canon MX300... | Answered on Jan 20, 2016

If you are using any refilled catridges, remove it and try with original one. See if any dust is present or any pieces of paper left or struck inside. Make sure the catridges are not empty. Try it out.
If still it does not happen then call the technician to check the sensor part of the printer.

Canon MX300... | Answered on Apr 17, 2015

open the top and check for any loose paper jams.then use some
alcohol on a q-tip to clean all the rollers.

Canon MX300... | Answered on Mar 05, 2015


Canon MX300... | Answered on Feb 15, 2015

Have you downloaded or installed the full software for it? If so can you open the program first and initiate the scan from it?

Canon MX300... | Answered on Nov 17, 2014

sometime my printer does the same, print something and see how the black color is, if it is printing or it is the color ink that needs to replace also. i just keep printing until the ink get real light then i change them.

Canon MX300... | Answered on Jul 11, 2014

The fix for that error simply says to open the door by hand. If that doesn't fix the issue you need to contact a service center.

Canon MX300... | Answered on Jun 24, 2014

Not finding what you are looking for?
Canon MX300 Office All-In-One Printer Logo

645 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts


Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2261 Answers


Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Canon Office Equipment & Supplies

  • Canon Office Equipment & Supplies

Most Popular Question

lost cd canon mx3oo

  • Office Equipment & Supplies