20 Most Recent Lenovo 3000 J Series 1.80G VBE PC Desktop Questions & Answers


First of all, if you have two ram modules, try removing one of them. If you have only one, use memtest86, it can test ram for failures. It looks like ram failure to me. But it could be also a hdd problem, try listening for strange sound.

Lenovo 3000 J... | Answered on Dec 18, 2016


If you have a network of computers, from time to time you will need to perform software upgrades and install new software onto the computers. Depending upon the size of your network, this can take anywhere from a few minutes to a few hours. Before installing software on a network, be sure to read the software licensing agreement. Most software programs only permit you to install the software on one computer per license.
jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); }); Difficulty: Moderate Instructions
  1. Step 1 Power on each computer within the network on which you would like to install the software.
  2. Step 2 Log on to each computer with the administrator username and password. If the network administrator has not established a username and password for the network, you will not be prompted for a username and password.
  3. Step 3 Check each computer to ensure that it meets the minimum system requirements for the software download (for example, the correct operating system, sufficient disk spacemag-glass_10x10.gif and correct processor).
  4. Step 4 Insert the software CD into the CD ROM drive of each computer on which you want to install the software. Enter the software license number or product key code. This will be located in your software package.
  5. Step 5 Run the software installation wizard. Some software programs may require configuration after it has been installed.
  6. Step 6 Remove the software CD from the computer after the installation is complete. Restart the computer.

Lenovo 3000 J... | Answered on Jul 09, 2015


First, is the computer coming on, do you hear the boot up beeps and sounds. if that is happening, try another monitor, if that works, buy a new one, if that does not work, repalce the video card. if none of that works, take the machine to a local shop for analisis. This might remotely be caused by a virus, but if you are using a good virus protection, it should have caught it.

Lenovo 3000 J... | Answered on Sep 15, 2014


on some pc's that would mean it does not detect any RAM present.
here is the Maintenance Manual for your series :

http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkcentre_pdf/41t3751.pdf


[ Beep Codes begin on page 75 ]

Tallon41

Lenovo 3000 J... | Answered on Aug 24, 2012


Paper towel or air duster

Lenovo 3000 J... | Answered on Mar 22, 2012


Hello, please try the following:
1. First is to check your power supply. Try to look if the power supply is functioning, if the fan turns so it is okay.
2. Try to remove the CMOS battery and put the cmos jumper setting to reset mode.
3. Remove the Memory card.
4. Plug your Computer and standby it for about 3 minutes.
5. Return all the devices that you remove.
6. Switch back to normal the CMOS.
7. Turn on your computer and your done.

Hope it will help you.

Lenovo 3000 J... | Answered on Mar 15, 2012


You will have to change the motherboard and a few other pieces.

Lenovo 3000 J... | Answered on Feb 21, 2012


This is an error with your computer's video card. You will need to have your computer serviced by a hardware expert.

Lenovo 3000 J... | Answered on Jul 28, 2011


this beep is possibly telling you your hard drive is having an issue.
the boot sector is probably gone and you will need to format the drive, or buy a new one and install it.
Please give detailed information as to your issue to better assist you in your resolution of the problem you are having.The more information given will help determine the resolution and guide you to the proper fix for your issue.
Thank you.

Lenovo 3000 J... | Answered on Jun 18, 2011


No, you can run it with a Linux Live -CD just fine, but without it it will run extremely slow and without any way to save files.

Lenovo 3000 J... | Answered on May 30, 2011


http://www-307.ibm.com/pc/support/site.wss/MIGR-66153.html

Lenovo 3000 J... | Answered on May 20, 2011


Welcome to Fixya

If you did not perform any hardware modification inside the computer then its gonna be sdomething is shorting the front phone jack and the board. You may need to open up the tower and check the wires connecting the fronta panel going to the board.

Thank you for using Fixya!


If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Lenovo 3000 J... | Answered on May 07, 2011


Welcome to Fixya

Here's the link where you can download the ethernet driver for your computer. Drivers here are for windows Vista and Xp only.

Thank you for using Fixya!

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Lenovo 3000 J... | Answered on May 02, 2011


ddc/ci funtion enabled keeps flashing on screen how do i get rid of it

Lenovo 3000 J... | Answered on Apr 16, 2011


Windows activation is the key that comes with the software you purchase from Windows.
Check your documents.

Lenovo 3000 J... | Answered on Mar 12, 2011

Not finding what you are looking for?
Lenovo 3000 J Series 1.80G VBE PC Desktop Logo

Popular Tags

101 questions posted

Ask a Question

Usually answered in minutes!

Top Lenovo Computers & Internet Experts

Alun Cox

Level 3 Expert

2679 Answers

Ekse

Level 3 Expert

13434 Answers

Toby Lee
Toby Lee

Level 3 Expert

409 Answers

Are you a Lenovo Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

3000 Lenovo

  • 3000 Lenovo

Most Popular Question

blue box ddc ci function enable

  • Computers & Internet
Loading...