20 Most Recent NEC VT595 LCD Projector - Page 2 Questions & Answers


Check the screws are all screws properly fitted.Also check if you have re -fitted the lamp cover properly and fitted the screws properly/.If the lamp cover is not secured properly then new lamp will not get detected. After the lamp is replaced.You need to reset the lamp hours. select the menu then ---reset then--- clear lamp hours ---- to reset lamp usage hours. ------------- The power light is orange.This means that projector is cooling down.----------------- The status light is blinking red.This means that there are few possibilities.How many times the light is blinking count that.------- 1) If status light is just blinking 1 time.This means that lamp cover is not properly closed or the lamp housing is not properly fixed or the lamp housing is got shorted.the new lamp has to be placed properly,other wise it get burned in few minutes.Check the lamp placement and lamp cover fitting.If any thing is not properly seated then the status light blinks only one time.----- 2) If the status light blinks 2 times then its temperature error,the projector needs to be placed in cooling area like in the ac room or near to cool place like near the open window.Or you can externally place the fan to the back of projector.This cools the internal overheated temperature.This has to be done if there are 2 blinks on status indicator light. ---------------- 3) If the status indicator light blinks 4 times then its internal fan error.The fan is not working.There is a fan in the projector.This fan cools the lamp assembly and controls the temperature.If this fan stops running then lamp gets over heated and temperature increases and status light will give indication by 4 blinks.Many a times fan gets obstructed by dirt collected inside or the ventilations in the projector gets blocked.Check the ventilations too.---------- 4) If the status indicator light blinks 6 times then this is indication of lamp error.Turn the projector off,remove the lamp and reconnect it properly then turn it on again. -------------------------------------- If the lamp indicator light is blinking or steady red,then this is indication of lamp replacement.---------- But as you mentioned that you replace the lamp so lamp is new.In some cases new lamp comes faulty.Get it replaced.But if lamp is ok then check the fan, the ventilations,the placement of lamp.Place the lamp to cool place.Check the lamp and lamp cover fittings. Every thing should be proper.But if all things checked out ok then yes your replacement lamp is faulty.You will have to get it replaced.Always buy original lamp,in case if you have ordered compatible lamp,then in some cases compatible lamp will not support your projector.The original always works. ---------------- If you require user manual for your nec projector then click the link below:--- http://www.support.nec-display.com/dl_service/data/manual/english/vt695_491_manual_e.pdf ----------- the troubleshooting guide is mentioned on page number 55.------------ This should help.thanks.Helpmech.

NEC VT595 LCD... | Answered on Mar 13, 2011


just press power button to turn on or off (twice to turn off)

NEC VT595 LCD... | Answered on Mar 09, 2011


Slide panel out half an inch. Using thumb and index finger squeeze end of cover and pull out

NEC VT595 LCD... | Answered on Mar 02, 2011


Hi,
There is a good chance that the problem may due to overheating. The status light would be blinking when it turns off.
Remember to disconnect the mains supply before working on the projector..
You should ensure that there is adequate ventilation and air flow around the projector, and that it is not in a very hot or humid room. Clean the air filters, using a vacuum cleaner. You should not need to remove the filter to clean it. Do not wash the internal sponge filter. It's better to replace it with a new one. The air filters are located on the side of the projector nearest the lens, one at the front and one at the rear.

NEC VT595 LCD... | Answered on Feb 19, 2011


I hope you have fixed it by now but just in case, go to menu and select the reverse option. It is set for rear projection at the moment.
Hope that helps.

NEC VT595 LCD... | Answered on Feb 16, 2011


Hi,
A yellowing image, especially if it's circular in shape indicates the BLUE LCD polarizer is burned from overheating or just a lot of hours on it & it needs to be replaced to make the yellow go away. You can purchase a new filter from hundreds of online retailers. Just do a search on Google for "NEC VT595 Filter"
REPAIRS:
If you're interested I do replace the polarizer filter panels. I have parts in stock for the NEC VT595. The repair quote is $50 & if you have it repaired the $50 is put toward the repair. The repair will include cleaning all the LCD panels, filters, lenses, etc. on the inside which will bring back the original sharp picture again. If you like you can email me at prmhelp@earthlink.net for more information on having it repaired.
Thank You,
Jim Peters
Big Screen Projectors
PRMHELP@EARTHLINK.NET

QUALITY NEW, USED & REFURBISHED PROJECTOR SALES & REPAIR
See our products on Ebay at Seller ID BIG*SCREEN*PROJECTORS
With over 3,000 sales we still carry a 100% positive feedback rating!


QUALITY NEW, USED & NEW PROJECTOR SALES & REPAIR
See our products on Ebay at Seller ID BIG*SCREEN*PROJECTORS
With over 3,000 sales we still carry a 100% positive feedback rating!

NEC VT595 LCD... | Answered on Nov 16, 2010


Check the air filter and if it has an air filter counter, you may need to reset it.

NEC VT595 LCD... | Answered on May 13, 2010


Here is the user manual for this projector, It should help with all your questions.

http://www.projectorcentral.com/pdf/projector_manual_3467.pdf

NEC VT595 LCD... | Answered on Apr 22, 2010


I found a site with a manual and looked it up - Thanks

NEC VT595 LCD... | Answered on Nov 09, 2009


The power on the outlet is not regulated. Or if you are using RCA AV cable, replace a good quality one. Its signal interference.

NEC VT595 LCD... | Answered on Oct 21, 2009


if you remove the lamp, inside the lamp housing you will see a refraction (fly-eye) lens. these evenly distribute the lamp light. the one on the other side from the one you see (there are always 2 lenses) is probably burnt and needs replacing (a common problem with lcd projectors). you will have to send it in to nec. in many of their projectors, both lenses are in one assembly.

NEC VT595 LCD... | Answered on Sep 11, 2009


office.manualsonline.com/manuals/mfg/nec_display_solutions/nec_display_solutions_projector_product_list.html
here you will get manual it has complete details on the filter . please rate my answer

NEC VT595 LCD... | Answered on Jul 03, 2009


It could be the laptop settings. You have to clone the output of you video card. You might have extended desktop setting selected. See if your mouse shows up when you scroll it across the screen. (go all the way left or right) . If you have questions you can call me 1-646-441-5254 Hope this helps.

NEC VT595 LCD... | Answered on Apr 14, 2009

Not finding what you are looking for?
NEC VT595 LCD Projector Logo

58 questions posted

Ask a Question

Usually answered in minutes!

Top NEC Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

The Knight
The Knight

Level 3 Expert

76237 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a NEC Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

NEC Office Equipment & Supplies

  • NEC Office Equipment & Supplies

Most Popular Question

will not turn thus not focus zoom

  • Office Equipment & Supplies
Loading...