Top 20 Lexmark X646e Laser Printer Questions & Answers


Who ever thinks it is a software (as in computer driver) problem, you need to read what the problem was and the steps already taken to solve.
As you can see it is clearly to do with the cables and is a common problem with these copiers. We have three in shop right now with same issues!

The areas to look at are the cable connectors for damage, if you are technical you can open the adf plastic covers, and follow your scanner cables make sure no "pinching" has occured.

Other than that you can try factory reset, although this rarely works for this problem.

Refurbished units are retailing arond $350-400 all over google.

Lexmark X646e... | 7,983 views | 2 helpful votes


Check the following:


1. DC motor assembly.
Make sure all the motor plate mounting screws are tight.


2. Idler pulley - DC motor assembly.
Make sure the idler pulley is not binding on the pulley shaft. Check the pulley for wear. Check the idler pulley shaft on the motor mounting plate for damage or contamination.


3. Drive pulley.
Check the drive pulley for wear, binds or damage to the pulley or pulley shaft. Make sure the pulley turns freely on the pulley shaft.


4. Motor drive belt - tray drive belt.
Check the DC motor drive belt for damage. Make sure the belt is tracking correctly on the drive pulley, idler pulley, and motor pulley. Check the tray drive belt for damage. Make sure the belt is tracking correctly on

Lexmark X646e... | 309 views | 1 helpful votes


There are two flags on the back of the fuser, make sure the are moving properly and that the sensor itself has not been knocked off.

Lexmark X646e... | 52 views | 1 helpful votes


Please make sure the print head is seating properly as it should.
Another reason could be the contacts of the print head are not connecting properly with the main printer due to dirt. Remove the print head, clean the contacts of the print head and where it seats at the printer. hope this will help

Lexmark X Office... | 58 views | 0 helpful votes


Download from here Valerie
http://www.siliconguide.com/drivers/device/130/

Lexmark X Office... | 32 views | 0 helpful votes


Yes it is true machine will print because its maybe need some type of repairing or the machine is not a printer of a photocopy

Lexmark X Office... | 45 views | 0 helpful votes


The problem with XP is that its not support by any new printers. However, you may be able to use the universal HP PLC5 driver to run the Lexmark.. According to Lexmark windows XP is a supported OS for this printer. Go to the Lexmark site, support and download the driver. Here is the link
support lexmark com

Advanced Business Computers specializes in printer copier network support and maintenance.

Printer Repair Service in Miami and Fort Lauderdale FL

Lexmark X Office... | 238 views | 2 helpful votes


Here is a manual for the same. In case you are unable to do it, please call on 1-877-805-1027 for further assistance.

http://www.lexmark.com/publications/pdfs/lexmarkj110/eng/clean.pdf

Lexmark X Office... | 104 views | 0 helpful votes


sadly that is not a function with magicjack phone .

Lexmark X Office... | 44 views | 0 helpful votes


Go to 'control panel/printers'

Lexmark X Office... | 51 views | 0 helpful votes


Make Your Selection

Try the lexmark support

Lexmark X Office... | 38 views | 0 helpful votes


it has to be a lexmark cartridge,not a refilled or generic cartridge,if it is a lexmark,take it back to the store and tell them

Lexmark X Office... | 51 views | 0 helpful votes


Hi,

I assume you meant a Lexmark Z735 printer.

This is an older printer, but the printer may work with Windows 7 Home Premium, Professional or Ultimate. You can try to install the driver for Windows Vista, BUT MAKE SURE you install the correct driver for your system. Check to see if you have a 32 bit or 64 bit system and install the appropriate driver. Check this link first:

www.microsoft.com/windows/compatibility/windows-7/en-us/Search.aspx?s=Lexmark%20Z735&type=Hardware

You should uninstall the current driver first.

Then see these links:

Lexmark Z735 Driver http://support.lexmark.com/

Lexmark X Office... | 121 views | 0 helpful votes


You should change font in your text processor. Priter only prints as you format your text in your computer

Lexmark X Office... | 84 views | 1 helpful votes


Hi John, you can find all the connection instructions on the users manual from page 49 on. Here's the link to the manual. Good luck!
http://images.lexmark.com/publications/pdfs/2007/6500/v4897402_en.pdf

Lexmark X Office... | 51 views | 0 helpful votes


here you have it:
Use Adobe Acrobat reader if you can't open it in the first place: http://www.lexmark.com/publications/pdfs/2007/x54x/v5404678_en.pdf

Lexmark X Office... | 34 views | 0 helpful votes


I guess you want to know how to open it up to change cartridges? Are you sure of model number? I cant find a thing on it.

Lexmark X Office... | 33 views | 1 helpful votes

Not finding what you are looking for?
Lexmark X646e Laser Printer Logo

Popular Tags

9 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

X Lexmark

  • X Lexmark

Most Popular Question

knocking noise when printing

  • Office Equipment & Supplies
Loading...