20 Most Recent RCA RCR504BR 4-DEVICE PALM-SIZED UNIVERSAL REMOTE Questions & Answers


I have a different model of RCA but had the same problem, try this: Code for Comcast Remote Control is 13183
Code for Voice Control Remote Control is 12292, however when you go thru the automated process of programming your TV you need to select TCL as your TV brand. Do not select RCA for Voice Control Remotes.

RCA RCR504BR... | Answered on Oct 03, 2016


If there is set-up codes to LG brand TVs; you can set it up with your TV. Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Type in the brand name of your device, in the search box [at the top right] of the display window, and press enter to get all related posts. It will make surf easy.

RCA RCR504BR... | Answered on Feb 13, 2015


After the main board replacement, there are some adjustments should be done. Sometimes, the firmware update too might be necessary. There are service adjustments too. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
https://homenol.blogspot.com/

RCA Televison &... | Answered 2 days ago


The applicable code would be in a compatible remote control.

RCA Televison &... | Answered 2 days ago


Make sure that hdmi output is activated in box setup. If there is no settings, turn off box, connect different cable and turn on tv and box. If still no go then possibly you have damaged hdmi output in the box

RCA Televison &... | Answered on Dec 03, 2019


PERHAPS IF YOU TRY RCA LOCAL RETAILER CAN DIRECT YOU TO A PLACE THAT FIXES THEM

RCA Televison &... | Answered on Nov 30, 2019


Use code search on your URC to find something that works. If a search through all codes stored in the URC fails, try a different one.

RCA Televison &... | Answered on Nov 28, 2019


HI,

if the display shows a progress bar when lowering and increasing the volume, that's a system built feature. you will not be able to remove that feature.

RCA Televison &... | Answered on Nov 22, 2019


You can't do anything without a remote. How can you not have a remote for it! Just buy a facsimile remote, the same as the old one.

https://www.google.com/search?client=piriform&ei=J-HWXfG-Ksm0ggfRhqvgDQ&q=model+le32b30+replacement+remote+control

RCA Televison &... | Answered on Nov 21, 2019


Check the remote control for its infrared emission. Check it with fresh batteries. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. Surf the site with patience.
http://electronicshelponline.blogspot.com/

RCA Televison &... | Answered on Nov 14, 2019


Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

RCA Televison &... | Answered on Nov 14, 2019


In general the TV is not receiving any input. The fact that you lost HDMI and VGA earlier suggests that there is a breakdown in the input circuits.
Best guess, replace the main board. Symptom doesn't seem to indicate Power supply or TCon board
https://www.a2zelectronicparts.com/products/view/82546

RCA Televison &... | Answered on Nov 09, 2019

Not finding what you are looking for?
RCA RCR504BR 4-DEVICE PALM-SIZED UNIVERSAL REMOTE Logo

Popular Tags

5 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

RCA Televison & Video

  • RCA Televison & Video

Most Popular Question

need code tv its tecnicolour rca none

  • Televison & Video
Loading...