20 Most Recent Copystar Kyocera FS-1135 MFP/DP Multifunction Printer - Page 5 Questions & Answers


C6000, С6030 is Abnormally high temperature in the fixing section – The fixing unit thermistor output voltage remains less than 0.5 V for longer than 1 s, indicating the fixing temperature rises above 536F this may be the fuser is no good. Sorry? coll to Servise center Mita. Dood lack!

Copystar Office... | Answered on Sep 22, 2009


What type of paper are you telling the copier your using, your copier's duplexer (The section that turns the paper over for the second side image) if the copier is told that the paper is to thick (lbs/gm2) you operator manual will tell you what media (paper) can be used. either, via lbs system (US System) or g/m2 system rest of the world. What the paper comes wrap up in will tell the thicknest of the paper either in lbs, g/m2, or both

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Copystar Office... | Answered on Aug 19, 2009


Hello sir; I don't know which machine you have, usualy they have paper separetion roller or separetion pad replace it ,will be ok.

Copystar Office... | Answered on Aug 05, 2009


Hi there,

Do unplug the unit for at least an hour, this can help you reset the unit. Or you have to clear out the memory by accessing the fuse on the power board, you have to remove it to reset unit.

Make sure that your printer was not plug into elec outlet before doing this.

Hope this helps

Copystar Office... | Answered on Jul 31, 2009


Either a problem with the document feeder or something on the glass. If it's faded it may just be a roller not pushing the paper onto the scanning area properly.

Copystar Office... | Answered on Jul 20, 2009


Hi there

I think you might mean how do you ping the IP address of the copier? Please confirm.

If so, do you know of the IP address already? If so, go to Start > Run (or in Windows Vista just type:) > type in CMD, and press OK (or in Windows Vista press enter).

A black windows will appear.

Type in ping 192.168.1.1 (or whatever the IP address is).

If you are unsure of its IP address, let me know, and also what Windows you are running.

Thanks.

Best regards

Copystar Office... | Answered on Jul 11, 2009


Hi

I believe this issue comes from different color settings used on different computers and different versions of windows.

the solution would be to have the computers all use the same color management settings.

Its not a fault on the printer, it comes down to setting differences. If you prefer a document one way you should print it from the computer where it prints the one you want.

or compare the color management settings under both computers in the printers properties (start -> control panel -> printers -> right click printer properties)



Copystar Office... | Answered on May 16, 2009


this problem will only occur if the main charge is not working.
it will almost certainly be the whole main charge assembly but maybe the high voltage transformer (but that would be very uncommon)
please rate if this fixes your problem

Copystar Office... | Answered on Apr 23, 2009


Hello sir; I believe your error code should be C030, if that's correct that 's mean main board is bad , it not worthy to repaire it, go buy a new machine.

Copystar Office... | Answered on Mar 08, 2009


H4 means the heat rollers aren't functioning. It could be thermistor replacement. You can get fuser parts at precission roller.com if you want to fix it yourself.

Copystar Office... | Answered on Mar 04, 2009


it sound like the fuser might be bad in the copier

Copystar Office... | Answered on Jan 17, 2009


You will have to call a CopyStar dealer or a Kyocera-Mita dealer to get that part.

Copystar Office... | Answered on Dec 09, 2008


You probably need a new fuser.

Copystar Office... | Answered on Oct 07, 2008


C710 Toner sensor problem
• The sensor output voltage is outside
the range of 0.5 to 4.5 V during toner control.
• The toner sensor control voltage cannot be set within the setting range when maintenance item U130 is run.

Try removing and refitting drum and toner.
If that doesn't help the toner cartridge or sensor is damaged.
Please take a moment to accept and rate this solution accordingly.
Thanks,
Lee

Copystar Office... | Answered on Sep 26, 2008


ok this is a fuser error.
you need to try a fuser reset.
key in 1087 1087 then 163 start, press EXECUTE then start again.
the machine will turn off and back on if this does not fix it you need to get a service person.

Copystar Office... | Answered on Jun 01, 2008

Not finding what you are looking for?
Copystar Kyocera FS-1135 MFP/DP Multifunction Printer Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top Copystar Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Tammie Duggan
Tammie Duggan

Level 2 Expert

57 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Copystar Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Copystar Office Equipment & Supplies

  • Copystar Office Equipment & Supplies

Most Popular Question

fix developer unit not installed

  • Office Equipment & Supplies
Loading...