20 Most Recent Dynex 802.11g Wireless-G Desktop Card Questions & Answers

The driver for DYNEX DX-WGDTC is free and the following link.


Dynex 802.11g... | Answered on Jul 26, 2011

install latest driver or troubleshoot

Dynex 802.11g... | Answered on May 04, 2011

The DX-WGDTC adapter is not compatible with Windows Vista. It was designed to work with Windows 98 through Windows XP. However, you can try to use it with a Windows Vista system. What will happen a lot of times is that the router will provide basic functionality but it may display some quirks, or it may drop the connection occasionally.

You can get a decent Wireless-G adapter for $30 or so, so you're probably better off just buying a Vista-compatible adapter, but if you already have this one, might as well see if it will work!

Dynex 802.11g... | Answered on Dec 07, 2010

Installing a Wireless PCI card requires opening the cpu case. Be careful to unplug the system before attempting it.

This tutorial should guide you in the right direction


Dynex 802.11g... | Answered on Jul 10, 2010

hello Gene1945US,

  1. Gather information from the setup process. In order to set up the wireless client, you will need to know the service set identifier (SSID), the Wireless Encryption Protocol (WEP) key and the channel and mode.

  2. Boot up the laptop and plug in the WiFi card. This will not be necessary if your laptop has an integrated WiFi card.

  3. Install any drivers needed to use the WiFi card. Insert the disc that came with the WiFi card and follow the on-screen installation process. Most discs will trigger a new hardware wizard that makes installation extremely simple.

  4. Double-click on the "WiFi Connection" icon. It can be found in the system tray at the bottom of the laptop screen.

  5. Click on "Properties."

  6. Select the "Wireless Networks" tab.

  7. Use the "Add" button at the bottom of the dialog if your WiFi network isn't in the "Available Networks" section.

  8. Click on "Configure" when you see your network's SSID in the "Available Networks."

  9. Enter your network's SSID and WEP key.

  10. Click on "Start," then choose "Connect To" and "Wireless Network Connection." Your computer should now be able to access the WiFi network. If the WiFi network is connected to the Internet, it should also be able to connect to the Internet.
Please let me know if you have any further questions or concerns.


Dynex 802.11g... | Answered on May 24, 2010

Dynex Wireless-G Desktop Adapter is making my Win XP freeze within seconds after logging in. I've tried uninstalling, installing about 5 times. I'm doing everything by the install directions, nothing seems to help. It's a Compaq Presario Desktop.

Any help would be appreciated

Dynex 802.11g... | Answered on Mar 08, 2010

go to the manufactuere website of your wireless card and look in downloads your file will be there download and install it

Dynex 802.11g... | Answered on Oct 08, 2009


its a issue with dhcp probly check this out

Dynex 802.11g... | Answered on Jun 01, 2009

Plug the keyboard into another device and if it works, then your Chrome laptop is at fault. If the keyboard does not work in a different device, toss it and buy another one, unless it's new, then take it back to the store where you bought it.

Dynex Computers... | Answered on Apr 28, 2019

This sounds like you need a smartcard or your current smartcard is not working anymore. Your local provider probably "scrambles" the service over the line and you need to buy a certain subscription to see this channel. Please get in contact with your cable provider.

Dynex Computers... | Answered on Jan 17, 2019

go the the manufacturers web sit for the make and model of the mouse
download the driver compatible with your operating system , and run
also you can go to control panel select the mouse section and check for compatibility in properties section
it is there that you can alter mouse speed , clicks , scrolling and the like

Dynex Computers... | Answered on Aug 29, 2018

The Dynex DX-PWLMSE uses a 27 MHz frequency wireless connection between the mouse and a specific USB receiver. For the specifications, see https://www.dynexproducts.com/pdp/DX-PWLMSE/8632063 .

To use the mouse, you need to press the Eject button behind the scroll wheel. This lets you open the battery/USB storage compartment. Put two AAA batteries into the mouse. Then remove the USB adapter (it's between the two battery slots). Close the storage compartment and put the USB adapter into an available USB 2.0 slot on the computer with a version of the Windows OS above Windows 98. (Note: the specifications I see indicate Dynex wrote drivers for Windows Vista. It may not work with Windows 7, 8 or 10.) Make sure that the computer is on and can get driver updates from on-line sources. Turn on the mouse and it should auto-pair with the receiver. If there is no response, try pressing and holding the connect button on the bottom of the mouse.

I'm not aware of any vendors that sell the USB receiver for this mouse. The manual for the DX-PWLMSE is available from Manuals Lib: https://www.manualslib.com/products/Dynex-Dx-Pwlmse-Wireless-Optical-Usb-Laptop-Mouse-4908.html .

I hope this helps.

Cindy Wells

Dynex Computers... | Answered on Jul 16, 2018

1. Goto the following link: http://www.dynexproducts.com/t-drivers.aspx 2. In the main page area, under "Driver Downloads", click on the text "Video Accessories". 3. Click on the link (in blue) specifying you web cam's model to start the download of your web cam's drivers.

Dynex Computers... | Answered on Jun 28, 2018

Not finding what you are looking for?
Dynex 802.11g Wireless-G Desktop Card Logo

21 questions posted

Ask a Question

Usually answered in minutes!

Top Dynex Computers & Internet Experts


Level 3 Expert

904 Answers

Prashant M
Prashant M

Level 3 Expert

2277 Answers


Level 3 Expert

4363 Answers

Are you a Dynex Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Dynex Computers & Internet

  • Dynex Computers & Internet

Most Popular Question

xp driver dynex dx wgdtc not drive

  • Computers & Internet