20 Most Recent KitchenAid Artisan Series Tilt-Head Stand Mixer - Page 5 Questions & Answers


"Tried to take it apart" seems to indicate that you didn't get it apart. If you want to straighten the lever properly that's the only way you are going to get it straight. If there are any other problems they will be revealed during the taking apart process. Back off, pedestal off, planetary off and split the cases.

KitchenAid Food... | Answered on Jun 02, 2018


Here's one here

https://www.amazon.com/KitchenAid-8-Quart-Stand-Mixer-Bowl/dp/B01N6NBODM

KitchenAid Food... | Answered on Apr 27, 2018


Honestly the easiest way by far is to put the metal shaft of the new one into a vice and with 2 screwdrivers carefully lever it off and then with a soft hammer tap the knob onto the original shaft. If you want to do it by replacing the whole arm and knob you will have to split the gear cases.

KitchenAid Food... | Answered on Apr 18, 2018


It sounds like it's been seriously damaged. I would suggest taking it to a repair shop.

KitchenAid Food... | Answered on Apr 06, 2018


Try pushing the pin in from the other side, forcing it in is better than making the hole any bigger as a loose pin will allow head wobble when mixing. Get the pin thru the pedestal without the motor, then get the pin through the motor neck then put them together and get the pin thru both parts. You need to have the locking lever in the release position to do this more easily. Make sure the pin isn't damaged on the end. It shouldn't be damaged on both ends unless you've been abusing it.

KitchenAid Food... | Answered on Mar 22, 2018


Sorry, that answer was for someone else. The only things I've seen to cause high speed running are out of adjustment screws at the top or the bottom of your control plate or the phase board. Start point for the top screws is 8 full turns in from being not even in the hole (both sides) and on speed 1 the bottom screw does not even touch that step in the flat rod that activates the switch and moves the control plate.

KitchenAid Food... | Answered on Mar 22, 2018


Have a look and see if the governor has flown apart, that's the brass thing on the end of the armature that activates the contacts on the control plate. Otherwise you are going to need to expand on how old the machine is and exactly what "broken" means.

KitchenAid Food... | Answered on Mar 14, 2018


I just got the same problem too. There was a little piece of fat in the meat and it stopped the grinder. I removed it but the attachment rotates a full turn and then stops. The same happens with other attachments even under practically no load.

KitchenAid Food... | Answered on Mar 10, 2018


Your mixer probably is leaking gear case lubricant.

KitchenAid Food... | Answered on Feb 21, 2018


Generally the problem is only the beaters. They may no longer be aligned in a perpendicular line and are slightly bent, just enough to make them click. You may have to replace the beaters to get satisfaction.

KitchenAid Food... | Answered on Feb 11, 2018


The speed selector may be defective and will have to be replaced.

KitchenAid Food... | Answered on Feb 10, 2018


Simply enter KHM3WH into a search engine (eg Google) and you will find a number of sources for replacement beaters.

KitchenAid Food... | Answered on Jan 18, 2018


The WACEM (We Actually Collect Electric Mixers) web site has a downloadable PDF of the "K5-A, K45 Original Service Manual" in the "files" section.

This can help you figure out what has gone wrong with yours.

KitchenAid Food... | Answered on Jan 11, 2018

Not finding what you are looking for?
KitchenAid Artisan Series Tilt-Head Stand Mixer Logo

41 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

Appliance engineer

Level 2 Expert

167 Answers

CJ C
CJ C

Level 2 Expert

66 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

KitchenAid Food Mixers

  • KitchenAid Food Mixers

Most Popular Question

hinge pin came out from head mixer

  • Food Mixers
Loading...