20 Most Recent Minn Kota Endura 30 Freshwater Transom Mount Trolling Motor - Page 9 Questions & Answers

not battery problem the brushes and or the bearings in motor or shaft are heating up and binding you can try lubing the bearings on unit so that their not dry as to the brushes if worn down an are heating up they would need to be replaced ---also check prop that no ebris is around shaft or behind the drop causing a drag

Minn Kota... | Answered on Aug 16, 2016

Sherry, I think there may be a new Minn Kota part # . Check the attached links. Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Minn Kota Power Drive Non Auto Pilot Coil Cord Assembly 2991283

Minn Kota Trolling Motor Part COIL CORD STRN RLF PD48 54 2991283


Can get replacement parts for my Minn Kota trolling motor FAQs

Minn Kota... | Answered on Apr 13, 2016

Digital Maximizerâ„¢
Digital Maximizerâ„¢. Up to five times longer run time on a single charge.
Conventional speed coil technology wastes energy by delivering a constant, steady flow of power to the motor regardless of the speed setting resulting in wasted energy.

Pioneered in 1985, Minn Kotas innovative Maximizerâ„¢ technology delivers the precise amount of power needed at any setting, along with variable speed control. Now, our advanced, digital microprocessing optimizes draw to extend battery life and reduce damaging heat. Get up to five times longer run time on a single charge.

Would think you would have to ask direct, but standard practice is to run your Minn Kota from a separate battery anyway, so the draw is pretty irrelevant to main engine starting.

your manual is here and states it has a battery level meter.


Minn Kota Motors

Minn Kota... | Answered on Jan 06, 2016

How heavy is the line that is attached to the anchor - you need to add that weight to the amount being lifted as well. Some general things to consider: Are you providing the correct voltage and current? Is the wire supplying the motor large enough - or is it getting hot? Check & clean as needed ALL connections at terminals, relays, etc for corrosion and tightness. Make sure the unit has been serviced and lubricated as required.

Minn Kota... | Answered on Sep 29, 2015

first of all do you have 3 or 4 batteries your cranking battery is not to be wired into this 36 volt if you have 4 batteries you have 3 for trolling motor and 1 cranking battery look on your charger see if the banks or numbered 1 2 3 4 .... you got to find what battery is # 1 depends on how they hooked in series if you hook charger on wrong battery most the time a red light comes on telling you wrong battery move wires till green lights come on all batteries.# 4 goes to cranking battery if you only have 3 batteries you don't have 36 volts you have 24 volts and a cranking battery if so # 3 goes to cranking battery

Minn Kota... | Answered on Apr 26, 2015

Not finding what you are looking for?
Minn Kota Endura 30 Freshwater Transom Mount Trolling Motor Logo

139 questions posted

Ask a Question

Usually answered in minutes!

Top Minn Kota Boating Experts

Gene Pitts

Level 2 Expert

159 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

29431 Answers

Are you a Minn Kota Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Minn Kota Boating

  • Minn Kota Boating

Most Popular Question

only model number need order minn kota

  • Boating