Top 20 Cerwin Vega PSX-253 Main / Stereo Speaker Questions & Answers

channel in receiver might have gone out or did you blow fuse inside speaker - switch to other out put location to see if speaker is issue or receiver

Cerwin Vega... | 59 views | 0 helpful votes

If it is a powered unit

Cerwin Vega... | 68 views | 0 helpful votes


Cerwin Vega... | 50 views | 0 helpful votes

Ask Cerwin Vega or check with a supplier

Cerwin Vega... | 170 views | 0 helpful votes

exactly the same fuse as that was installed
maker is of no matter but the rating is critical

Cerwin Vega... | 198 views | 0 helpful votes

You'll need some adapter cables. I would probably try a Y cable in each front speaker line, then connect the pair from the left channel to the "L" binding posts on the back of the Sub. Same for the right.
Not sure of the configuration of your existing surround system. Essentially, you want to "Y" the left and right channels wherever you can get a hold of them and connect each to the back of the sub.

Cerwin Vega... | 401 views | 0 helpful votes

Check and replace the damaged component/s at its audio amplifier stage circuit. If you wish to get more details, visit the sites linked here. Circuit diagrams of many devices are given. Search the site by type in the IC number used, or the brand name of your device in the search box at the top of the home page to get gathered all the related posts.

Cerwin Vega... | 103 views | 0 helpful votes

Well it is not an easy task to tweak crossover.If you just change capacitors,it could bring some advantages put probably will bring in the same time more unpleasant sound.If the old capacitor is MKT one then the new one should be MKT as well - if not you might get some frequences very loud and so unpleasant sound.MKP capacitoprs have very low resistance but mind the fact that the whole crossover was projected to use MKT capacitors.The same is for bas area - change electrolityc c with the same type but of good quolity - Mundorf maybe

Cerwin Vega... | 756 views | 1 helpful votes

Speaker fuses are rated in Amps. If you cant find the specs on your speaker via google, (I couldn't find anything on the fuse.) start with a 2 Amp 'slow-blow' fuse. That should work at low to medium volumes. If you find it blows at low volumes, move up to a 4 or 5 Amp fuse. E-715 is a big speaker, (handles 400W!) so starting at 2 amps should be pretty safe.

Cerwin Vega... | 160 views | 0 helpful votes

i believe you have a built in amp in receiver, so just do not push it, and its fine.

Cerwin Vega... | 87 views | 0 helpful votes

Definitely the crossover. Follow the wiring back to see where it connects and see what is on the board.

Cerwin Vega... | 200 views | 0 helpful votes

Absolutely, as long as they are the same impedance.
If you are unsure, use an ohmmeter to check the static impedance of the replacement speakers, and be sure that it is with in 2-3 ohms of the listed impedance of the speakers you are replacing (otherwise, your crossover points will be wrong).

Cerwin Vega... | 125 views | 0 helpful votes

Not finding what you are looking for?
Cerwin Vega PSX-253 Main / Stereo Speaker Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Cerwin Vega Audio Players & Recorders Experts


Level 3 Expert

5699 Answers

Brad Brown

Level 3 Expert

18121 Answers

Trippy Tripp

Level 2 Expert

194 Answers

Are you a Cerwin Vega Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Cerwin Vega Audio Players & Recorders

  • Cerwin Vega Audio Players & Recorders

Most Popular Question

cerwin vega vs150 crossover rebuild

  • Audio Players & Recorders