20 Most Recent Robot Coupe R2U Ultra Food Processor Questions & Answers


Cindy,
Send me your e-mail & I will send you back an exploded view of your Robot-Coupe. It will give all the info needed. capt_rick1912@yahoo.com

Robot Coupe R2U... | Answered on Jun 30, 2014


it takes two to do this. there are two holes on the bottom part of handle. find something strong to push them in. one person pushes them in and have other person with pliers pull on the plug that you need to remove to get to broken pin. after that...replacement is easy

Robot Coupe R2U... | Answered on Aug 05, 2011



Hi


Please check this link..


http://compare.ebay.com/like/150425046495?ltyp=AllFixedPriceItemTypes&var=sbar


Please accept the solution if it's helpful. Do get back to us for any further query.

Thanks for contacting fixya.com

Robot Coupe R2U... | Answered on Sep 27, 2010


It is overheating, probably because it is being overworked. Some common problems are overloading the bowl, or forcing too much food into the hopper on top. Once it overheats, it will kick out again rather quickly the next time unless the motor has time to cool. If you are shredding cheese, slow down on the amount of cheese forced into the blade. If you are trying to mix heavy dough you are probably overloading the bowl as well. This machine can't handle over a pound of pizza dough without overheating. The reset button is there to keep from burning the motor out. If you continue to reset and force feed the machine, it will burn the motor out. Good luck, hope this helps.

Robot Coupe R2U... | Answered on Sep 11, 2010


It just a long shaft phillips screwdriver. The screws are located under the foot pads. They just pull out and then there are the four screws.

Robot Coupe R2U... | Answered on Jan 06, 2010


Are you referring to the spring in the cutter bowl? You will need to remove the retaining nut. The spring will then come out. the part number for the spring is R1776. Whole assembly part # R242.
Are you referring to the spring in the on and off switch? You will have to replace the switch. If you call Heritage Food Service Equipment, they will be able to fax you a parts break down so that you will know what part is needed. They can most of the time tell you how to replace the parts also. You can contact them at 1-800-253-0200.

Robot Coupe R2U... | Answered on Oct 13, 2009


Hi im after a replacement lid for my robot chef rc3 if anyone has a spair one please email me at amynath1702@hotmail.com

Robot Coupe Food... | Answered on May 08, 2018

Not finding what you are looking for?
Robot Coupe R2U Ultra Food Processor Logo

24 questions posted

Ask a Question

Usually answered in minutes!

Top Robot Coupe Food Processors Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

ray gallant
ray gallant

Level 3 Expert

64806 Answers

Tom Chichester

Level 3 Expert

54386 Answers

Are you a Robot Coupe Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Robot Coupe Food Processors

  • Robot Coupe Food Processors

Most Popular Question

assemble robot coupe r 2 ultra

  • Food Processors
Loading...