Regal Ware K6725 Kitchen Pro Bread Maker - Answered Questions & Fixed issues


Faulty motor, faulty control board ...

Regal Ware K6725... | Answered on Jun 25, 2017 | 182 views


Where did you get the replacement belt ? My brother is looking for a belt for a similar model K6761 which uses the same belt (I think). It is about 24" around and 1/4" wide. It has (3) grooves inside and the backside has many notches. The motor has grooves, it would go on there. Where did you get the replacement belt ? thanks regus_patoff_2000@yahoo.com

Regal Ware K6725... | Answered on Nov 06, 2015 | 2,765 views


You don't really have to remove it at all. But pour very hot water into the pan and let it sit for about 10 mins. empty out, be careful it wil be hot then twist the blade it should come off. If not use a pastry brush and paint a little veggie oil on it.

Regal Ware K6725... | Answered on Nov 26, 2014 | 121 views


You may download a copy of the manual at http://www.managemylife.com/mmh/lis_pdf/OWNM/L0902435.pdf. You may use either type of yeast; see page 18 of the manual.

Regal Ware K6725... | Answered on Aug 26, 2013 | 76 views


MODEL NO 832-715

Regal Ware K6725... | Answered on Aug 14, 2013 | 124 views


You may download a copy of the manual at http://www.managemylife.com/mmh/lis_pdf/OWNM/L0902435.pdf

Regal Ware K6725... | Answered on Jul 31, 2013 | 48 views


You may download a copy of the manual here.

Regal Ware K6725... | Answered on Jan 30, 2013 | 164 views


I have that manual. You can reach me at breadmachineshelp.com

Regal Ware K6725... | Answered on Jan 28, 2013 | 101 views


did you ever find a belt for your k6725?

Regal Ware K6725... | Answered on Jan 28, 2013 | 33 views


I have a k6725 paddle in stock. Just email me at daryl441@msn.com
or visit me at breadmachineshelp.com

Regal Ware K6725... | Answered on Jan 28, 2013 | 161 views


The "waxed threads" are the remains of your belt. You need to remove all that stuff completely and throw it away and try installing your new belt. There are videos of how to do that on youtube. By the way does your machine have little teeth on both wheels or are the wheels smooth where the belt was?

Regal Ware K6725... | Answered on Jan 07, 2013 | 242 views


If the leak is not too bad and you are NOT using the delay timer. Put all the ingredients in flour etc. add the liquid last and just before pushing the start button pour the yeast in. You can do this until you locate a "pan assembly" for your machine or email me at breadmachineshelp.com for good used machines. I have a pan assembly for the K6725 if you are interested in it let me know.

Regal Ware K6725... | Answered on Dec 24, 2012 | 134 views


I have a paddle for a Regal k6730 that might fit. If you can send be a good clear digital pic of the spindle in the bottom of the pan. I can probably tell if they are the same. email the photo to dary441@msn.com and we can go from there

Regal Ware K6725... | Answered on Dec 02, 2012 | 73 views


That means your oven chamber is too hot to start another loaf. Let your machine cool down about 1/2 hour before starting another loaf.

Regal Ware K6725... | Answered on May 12, 2012 | 4,319 views


Do you have the manual? If not, just ask the manual search engine, they are specialists in finding breadmaker manuals. Be prepared to send them the full model details (e.g. a picture).

Regal Ware K6725... | Answered on Dec 23, 2011 | 101 views


The Guide and Cookbook for the Regal 6766 Automatic Breadmaker is available online here:

http://biz.regalware.com/pub/docs/Breadmaker_Books/K6776_Breadmaker_Guide_Cookbook.PDF

Regal Ware K6725... | Answered on Oct 26, 2011 | 56 views


your drive belt (if it has one) probably came loose or broke. Un plug unit and remove bottom screws to determine problem and rectify situation. Re- connect belt or purchase new one.

Regal Ware K6725... | Answered on Oct 21, 2011 | 32 views


Hi bex_ta,

If the paddle doesn't have the power to knead, you're probably losing torque at one or more of several points:
1) Where the paddle attaches to the shaft (is there evidence of slippage/wear in the paddle socket?),
2) Where the shaft goes through the pan (possible friction point - presumably this is what you oiled)
3) The belt might be slipping, either due to friction in the shaft, or because the belt is worn and loose.

You need to determine if the shaft is sticking, and if it's because it's bent (fairly unlikely) or if there's something fouling it. You'll need to isolate and fix that first. If you can rotate the shaft freely, then we look at (1) and (3) above - these are simple parts replacements, but the shaft would be more involved.

Belts are getting tough to find - if you can provide specs/measurements, I'm going to start contacting a small-run manufacturer to see about making some new belts, as I'm seeing multiple online requests for belt parts. If you happen to have a broken one, I'd like to get one as a sample to send to a manufacturer.

If I can be of further assistance, or if you have questions about any of my response(s), please let me know before rating me.

If this solves the issue, please rate it accordingly. My goal is to earn a "FixYa" rating from everyone I help.

Thanks for using Fixya.com,

Jon

Regal Ware K6725... | Answered on Oct 20, 2011 | 158 views


Try the web site spare part dept of whatever machine you are using

Regal Ware K6725... | Answered on Oct 19, 2011 | 17 views

Not finding what you are looking for?
Kitchen Appliances - Others Logo

329 questions posted

Ask a Question

Usually answered in minutes!

Top Regal Ware Kitchen Appliances - Others Experts

Irene Tulloch

Level 2 Expert

498 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you a Regal Ware Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...