20 Most Recent
Questions & Answers
So, my problem is
Sounds like the CPU may not be seated properly, did you remove the processor when you replaced the cooler (Heatsync I assume you mean)?
Try powering down and unplugging. removing the heat sync removing the processor. Re-seating the processor making sure it falls into place. then re add the thermal paste(if needed) and heat sync. Check the memory and video card to make sure they are firmly in and then power back on and see if it will boot.
Another thing you can do is check your motherboards manual or website and there is a description of "beep codes" that you can listen for yours and see exactly what its telling you is wrong.
Gigabyte Core 2...
on Jan 26, 2011
I dont able to format my pen drive when i open it
First u attach your pendrive with pc after that u do a right click on pen drive folder ,then u click on scan option then the scan folder will apper and u select the pen drive folder by adding ,then click on next opyion and wait untill the scan is over .After scan over's then u can format your pendrive....
Thanks for using fixiya
on May 15, 2018
GA-Z68AP-D3 wont recognise keyboard
This sounds very much like a faulty motherboard if it continually reboots. Try accessing the BIOS using the F8 key, however check you manual to make sure your motherboard uses the F8 key. If you can access the BIOS, it would be worth doing a complete reset to factory defaults and see if this fixes the problem. If you cannot access the BIOS, then you will be looking at a new motherboard.
on Nov 26, 2017
Not finding what you are looking for?