This morning I woke up
It's rather easy to do, supersonic. To find a crack or hole on the water collection bucket. remove it from the unit an visually inspect the bottom and sides for signs of crack or a hole. If you don't see anything, place it in a bath tub or large sink and fill it half full. If you can raise up off the bottom of the tub or sink, by about 1/2", so much the better. Make sure the sink or tub drain is closed. Allow it to set there for 10 minutes.
In the meantime. check the drain hole or tube for clogs. You will need an 18" long, plastic Zip Tie or something similar (NO wire coat hangers, thought) that will fit into the drain hole or tube. You will see the drain hole or tube, once the bucket has been removed. Carefully, insert the plastic Zip Tie into the drain hole or tube and continue to push it in, until you reach the bend in the tubing. Gingerly, work it past this bend, until the Zip Tie bottoms out or you run out of usable Zip Tie. Now, slowly remove the Zip Tie while rotating (twisting) it. This will break up any clogs. When the Zip Tie has almost been totally removed, be prepared for some water to follow.
CAUTION: DO NOT PERFORM ANY OF THE ABOVE BEFORE TURNING THE MASTER ON/OFF SWITCH TO OFF AND UNPLUGGING THE UNIT.
See, I said it was rather easy to troubleshoot and solve the problem. Please let me know how it worked out for you. Thanks.
on Jul 08, 2011