20 Most Recent
Questions & Answers
Eclipse 2GB clip on mp3
and hold the volume button, then while still holding the volume button
press the back arrow button to decrease volume and the forward arrow
button to increase volume.
Please do rate the solution if the issue is resolved or post a comment for further assistance.
Thank you for using fixya have a nice day:-)
on Feb 17, 2011
How do i advance the
All players are equipped with AUTO SCAN and MANUAL SCAN or seacrh.
Now look at the display screen and you can find arrow cursors in the tuning section. Press and hold and it scans .If the display indicates a auto scan, then press search option to release. Now select the band you wish to tune and press the arrow to move the frequency in short steps. the step can be incremented with an option normally available at the rear for two frequency settings. Once your program is locked , press and hold into the preset button to memorise.
The reason why the station runs off is that the signal strength is not enough for locking and hence these signals can die down. If youare aware of the station then find hte frequency of transmission to have a clear view to set the station.
Check the transmission of the same signal in another car or if better must check to see if your antennae is not effective.
on Sep 17, 2010
My mp3 player will not charge
There are only several cause of this problem. They are:
1. defective battery.
2. loose wire connection.
3. corrupted firmware.
It's better to contact the manufacturer, and have them check or repair it for you. Only the manufacturer carries the firmware that will work best with your device.
on Mar 12, 2010
USB Thumb drive
u3 is most likely the problem... pick up a usb drive that is blank (kingston is good) and try again after loading the music you want.
on Sep 10, 2008
Not finding what you are looking for?