Sony Bravia KDL-46V4100 46 in. LCD HDTV - Answered Questions & Fixed issues


Hi there,
If you haven't done so already, check that the cable between your tv and digital cable box(probably HDMI) is secure at both ends. If it is, try a different cable and/or different port on your tv if you have more than one. If the issue is still there after you've tried these options it's most likely an issue with either the digital box or tv. I would contact manufacturer at this stage for advise and possible replacement of tv or box if they are under warranty.
Hope this helps.

Sony Bravia... | Answered on Dec 30, 2017 | 557 views


I would think its a T-con bard fault its the main board for the screen over time they ware out from heat. this control the picture for the screen. they can go in many ways, black screen mixed or shadows even star screen and scramble type screen. and white lines and even half working only.

Sony Bravia... | Answered on Jun 07, 2017 | 446 views


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Sony Bravia... | Answered on Nov 21, 2016 | 452 views


Take a look at this:
https://www.youtube.com/watch?v=0KGysXbxnaU

Sony Bravia... | Answered on Oct 11, 2016 | 1,242 views


Hi

please open the MANU & then go setting where the factory rest is available so select the factory reset

thanks

Sony Bravia... | Answered on May 20, 2016 | 95 views


Hi Greg, you can get an idea by looking on Ebay or Amazon.....CHEERS..

Sony Bravia... | Answered on May 12, 2016 | 39 views


THE MAIN POWER BOARD IS DEFECTIVE SOME VOLTAGES ARE MISSING SO THATS WHY SET BLINK TWO TIMES PLEASE REPLACE POWER BOARD

Sony Bravia... | Answered on May 07, 2016 | 67 views


You used to be able to stream Netflix on this model with the Bravia Internet Video feature. (BIV) Unfortunately this feature is no longer supported. In order to get your Netflix now, you will need a Roku box or a Netflix thumb drive (fire stick). I hope this helps.

Sony Bravia... | Answered on May 06, 2016 | 247 views


More information please
What kind of TV
How old is the TV
Did you try unplugging the TV and letting it sit for about five or 10 minutes before power cycling it
Does it have a remote are there fresh batteries in the remote

I’m happy to help further over the phone at https://www.6ya.com/expert/joshua_ac64e182ed26f66d

Sony Bravia... | Answered on Apr 03, 2016 | 62 views


Sony Bravia... | Answered on Mar 21, 2016 | 142 views


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Sony Bravia... | Answered on Jan 20, 2016 | 125 views


On the back of the TV on the bottom left hand side, there is a small black sticker just about 2 cm square. It gives the Model Number, the S/N and the P/N (PIN). If thats no help then you can go to Sony website and get support:

http://www.sony.com/

Hope this helped, God Bless and Merry Christmas Tim

Sony Bravia... | Answered on Dec 22, 2015 | 56 views


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Sony Bravia... | Answered on Dec 04, 2015 | 160 views


Check the speaker/s. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. Surf the site with patience.
http://electronicshelponline.blogspot.com/

Sony Bravia... | Answered on Nov 24, 2015 | 47 views


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/

Sony Bravia... | Answered on Oct 19, 2015 | 163 views


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.

Sony Bravia... | Answered on Oct 15, 2015 | 118 views


HI,
Probable power supply board is faulty. Some times in power surge the mov (high voltage protection device ) will get short and blew fuse to protect further damages. Chekc is the mov in the input stage is short or not .

MOV
25849896-jmajcg34u0lptoxazpf34akf-1-0.jpg www.electro-medical.blogspot.com

Sony Bravia... | Answered on Sep 05, 2015 | 85 views


The proper way to do this would be to use the audio output from the TV, either analogue left and right or the optical port, and send it into an dedicated amplifier or AV receiver. You can then use the amplifier or receiver to power the external speakers. If you are using a dedicated amplifier with no volume control you will want to change the audio output setting on the TV to "variable out" as oppose to its current "fixed out"settings. You can find this in the TV menu, usually under the audio settings. This will allow you to use the current TV remote to adjust the audio volume coming out of the external speakers.

Sony Bravia... | Answered on Sep 03, 2015 | 14,413 views


Broda before we start, are you a technician? Because this has to do with real technical knowledge
Henry

Sony Bravia... | Answered on May 16, 2015 | 64 views


Hi,
Yor tv have problem with T con board. T con board is one which drives the pixels of the LCD panel. If any of the driver satge in the T con board is faulty then this problem can occur.

Some times bad contacts on the connections of the t con board can cause same problem. Remove the tv and find out the t con bard. Remove the connections to it and the reconnect the connections. Then check, if the problem remains the same then the tv need a new T con board.

You have didn't mentaioned any model number of your tv. So it is not possible to show you exactly how T con board looks.

Normally in all lcd tvs the tcon board is place on the bottom or top middile position. Which will be cover with metal cover or aluminium foil.

Here I have added a link which will lead you to the picture of T con board for toshiba.( Not exact one)

T con
http://electro-medical.blogspot.in/

Sony Bravia... | Answered on Apr 30, 2015 | 137 views

Not finding what you are looking for?
Sony Bravia KDL-46V4100 46 in. LCD HDTV Logo

374 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76237 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...