20 Most Recent HP OfficeJet Pro K8600 Printer Questions & Answers


I had the same problem; it happened with the first copy I tried to make directly from the printer's console - but only with the Black ink function - with the same original on the flatbed glass I then tried the Color function and it worked fine. But when I tried the Black copy function, the strong vertical lines appeared again - about 7, evenly spaced across the page and running the entire length of the page.

Nothing about cleaning any part made sense: the printer was brand new, out of the box, the color ink function worked fine to copy; so did making scan copies. It was only the black ink mode in the copy function with the original on the flatbed glass that produced the vertical lines.

What cleared it up was shutting it down, removing and re-inserting the power cord the other way, i.e., turning it around (which might have nothing to do with the outcome) and Voila! - no vertical lines with the black ink copy function - Go figure...

HP OfficeJet Pro... | Answered on Jan 17, 2019


I would like to share my solution to the problem. usually a bad ink cartridge. Take out one cartridge at a time and see which one it is you pulled out after which the message disappeared. Most times a remanufactured or refilled ink will cause that, but sometimes a genuine HP cartridge can trigger the message. Check out the video for better explanation. I hope!

HP OfficeJet Pro... | Answered on Nov 05, 2018


hp pro k8600 does not print a3 scale

HP OfficeJet Pro... | Answered on Apr 11, 2018


Ink levels are an estimate. They are approximated according to how much color might have been used. You may be out of all the color inks, they may be dried out or clogged. There should be a head cleaning operation for the printer, but it uses ink too.

HP OfficeJet Pro... | Answered on Feb 07, 2018


Hi,

Make sure that you have tried the steps in the following web link:

https://support.hp.com/in-en/document/c01287261

If the issue persists, then this is a hardware issue. From my experience Carriage Stalled errors are usually due to a hardware failure.
Regards,
Dr. Tony

HP OfficeJet Pro... | Answered on Sep 20, 2017


Delete the printer driver completely before re installing it.

HP OfficeJet Pro... | Answered on Jul 29, 2017


The printer set up procedure may reveal there is no provision for legal size printing.

HP OfficeJet Pro... | Answered on May 27, 2017


first of all disassemble sacaner and upper cover

HP OfficeJet Pro... | Answered on Apr 12, 2017


HP OfficeJet Pro K8600 Printer

Printing envelopes

HP OfficeJet Pro... | Answered on Jul 02, 2016


remove the cartridge and check that you have removed the tape across the print head
insert and press black button on the printer or next on the printer screen it should go to print test page which you then have to photo copy back into the printer so that it can realign the printer head .

HP OfficeJet Pro... | Answered on Sep 06, 2015


the only way to reset ink levels is to replace the cartridge(s). If you're refilling, you need a second set of cartridges and use them in rotation with the first set.

HP OfficeJet Pro... | Answered on Jun 07, 2015


Inspect the glass below the feeder for ink or ink correction liquid remnants from previous scanned documents. Clean them out.

HP OfficeJet Pro... | Answered on May 18, 2015


IT WORKS!!!! GOD BLESS YOU MCGYVER GEEK!!!! YOU SHOULD SELL THAT SOLUTION FOR 10 BUCKS. YOU'D BE RICHER THAN HP!

HP OfficeJet Pro... | Answered on Apr 18, 2015


the problem may be in the paper sensor
it might dusty or not returned to its position
to solve , open rear / duplexer door, look ! clean using air blower after-clean-rollers-water-feeding-xqjmda2cjqpaq5vricycwv14-4-0.jpg

HP OfficeJet Pro... | Answered on Jan 20, 2015


insure that the rear door is closed well

HP OfficeJet Pro... | Answered on Nov 17, 2014

Not finding what you are looking for?
HP OfficeJet Pro K8600 Printer Logo

358 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

OfficeJet HP

  • OfficeJet HP

Most Popular Question

hp officejet pro k8600 taking apart

  • Office Equipment & Supplies
Loading...