20 Most Recent Pride Mobility Products Go Go Ultra X 4 Wheel Questions & Answers


It sounds like the batteries have gone bad and need to be replaced.

The batteries contain a gel that needs to have current run through it on a regular basis (at least 8 hours one day a week) of the gel will solidify. What is probably happening is charger light will either stay green, go to green after a very short time, or the charger will be connected for hours or days and the light never changes indicating a full charge. When you turn on the power chair, nothing happens. The charger may indicate the batteries are full, but instead of being full of power, they are full of crud as the gel inside them has oxidized. Since you are the second owner of the scooter, you will need to replace the batteries on your own. Check the owenr's manual for the correct type or contact Pride Mobility at 800-800-8586. Good luck!

Pride Mobility... | Answered on Nov 09, 2010


hi,

Check the connections between the battery and motor, if the rear come apart check there connections there,

If the connection with the batteries string loaded, rough them up slighty with a wire brush but be gentle and is there freewheel lever right in position for drive.

Regards
GeWiz.

Pride Mobility... | Answered on Oct 25, 2009


MANY HAVE A BAR THAT WHEN THEY NEED PUSHED BY HAND IT DISENGAGES THE DRIVE .

Pride Mobility... | Answered on Mar 06, 2019


WELL POSSIBLY IF WE KNEW FOR WHAT BUT ALAS WE DO NOT

Pride Mobility... | Answered on Mar 06, 2019


SORRY BUT WE (FIXYA) DO NOT SEARCH FOR PARTS .FOR ANY ONE . CALL YOUR LOCAL REPAIR SERVICE .

Pride Mobility... | Answered on Feb 15, 2019


From a pure physics standpoint...

The energy to climb a hill... be it from the steep side or the gentle sloping side is the same...

It is just easier on your heart and joints to take the gentle slope... (assuming you have the time).

ERGO:
If treating the scooter like a QUEEN
is your goal... DEFINITELY GO SLOW.

Tat way you will have no idea if it has any weak spots when you need it to go fast (and you will).

I'm old... I don't have TIME to waste!

Carnac the Magnificent

Pride Mobility... | Answered on Mar 28, 2017


hi,

Sounds to me like the worm drive is slipping , this can happen when the worm drive small bearing is worn,

If you do take it a part , please take great care, the shaft from the motor will have a worm drive, two bearings on the worm drive,

Try to move the shaft within the bearings, I paid £10 for replacement bearings.

Please give me a update.

Regards
GeWiz.

Pride Mobility... | Answered on Sep 03, 2016


Maybe too late for this advice but it is important to take a detailed photograph of the wireing before unplugging anything.

Pride Mobility... | Answered on Jul 02, 2016


I'd recommend a dental pick.

Pride Mobility... | Answered on Jun 01, 2016


Hi not much info is there a red LED & green LED on charger...or is there a red LED & orange led on ?? Bit more info would help cheers

Pride Mobility... | Answered on May 16, 2016


Hi check the main circuit breaker c photo push the white button in to c if it has tripped open cheers
24247946-renznejc2kf2ou0julsh2cxm-2-0.jpg

Pride Mobility... | Answered on May 16, 2016


Yes a technician with a programmer can set the control very slow so it is limited on how fast it can go. Otherwise the joystick is meant to be adjustable, so setting it to one speed only not possible.

I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_bcbb89783b08c489

Pride Mobility... | Answered on May 15, 2016


hi Linda, can you please tell me what model pride this is ?

Regards
Rob

Pride Mobility... | Answered on Dec 05, 2015


Candy Apple paint is extremely hard to patch repair. It has a base coat of silver or gold and then multi coats of the candy apple over the top.
You can get a paint that is meant to be a touch up for candy apple but you never end up with the same shade of color. Most of the time it will come out dark blood red anywhere that it over laps the old paint.
I would contact Pride as they may use a paint that does not require a base coat.

Pride Mobility... | Answered on Oct 27, 2015


Check you're freewheel lever if its in freewheel u have to take the key out engage lever & put key back in. Also if u have left the key on for more than twenty minutes the circuit will shut down only the light will work. take key out for 5 minutes then put it back it should work unless it's another problem good luck

Pride Mobility... | Answered on Aug 03, 2015


Bearing probably.

Pride Mobility... | Answered on Jun 21, 2015

Not finding what you are looking for?
Pride Mobility Products Go Go Ultra X 4 Wheel Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Pride Mobility Products Health & Beauty Experts

Rob Hill
Rob Hill

Level 3 Expert

1412 Answers

Will

Level 1 Expert

25 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Pride Mobility Products Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Pride Mobility Products Health & Beauty

  • Pride Mobility Products Health & Beauty

Most Popular Question

passed

  • Health & Beauty
Loading...