20 Most Recent Jandy Ae2500t 115,000 Btu Heat Pump Questions & Answers


bad heater element

Jandy Ae2500t... | Answered on Nov 05, 2017


-Turn off the pump.
-Check the fan.
-board Repair.
-Open again.

Best Swim Pool Filter Pump PCB Main Board

**********

Jandy Ae2500t... | Answered on Jul 16, 2015


ee if filters are clean then check pressure switch to see if voltage on both sides should be 24 volts ac if not pressure switch bad or copper line plugged

Jandy Ae2500t... | Answered on Nov 29, 2014


replace temp sensor

Jandy Ae2500t... | Answered on Nov 26, 2014


replace temp sensor it is shorted

Jandy Ae2500t... | Answered on Nov 12, 2014


sounds like bad temp sensor

Jandy Ae2500t... | Answered on Nov 12, 2014


check filteres if clean check pressure switch voltage both sides should be 24 volts

Jandy Ae2500t... | Answered on Oct 09, 2014


remove the two black wires from the PCB board and remove the other part from the copper line going to the header where the pipes connect

Jandy Ae2500t... | Answered on Oct 09, 2014


open front panel look for a white and copper triangular object with 2 wires connected and a copper tube

Jandy Ae2500t... | Answered on Oct 09, 2014


it tells the unit that the filter pump is working if you dont have voltage to both sides either bad pressure switch or plugged copper line

Jandy Ae2500t... | Answered on Oct 09, 2014


check to see if filters are clean if so check to see if voltage on both sides of pressure switch if not either need new pressure switch or copper line is plugged

Jandy Ae2500t... | Answered on Oct 09, 2014


the sensor goesw into the header unscrews with two black wires

Jandy Ae2500t... | Answered on Sep 25, 2014


go into setup you can change there

Jandy Ae2500t... | Answered on Sep 25, 2014


need new temp sensor

Jandy Ae2500t... | Answered on Sep 25, 2014


check filters if ok check the pressure switch should be 24 volts both sides if not bad switch or calcium in syphon tube

Jandy Ae2500t... | Answered on Sep 25, 2014


check filters if clean check pressure switch see if 24 volts both sides if not not enough pressure or bad switch

Jandy Ae2500t... | Answered on Sep 25, 2014


shorted temp sensor replace

Jandy Ae2500t... | Answered on Sep 21, 2014


check to see if power is coming in that display runs off of 120 volt

Jandy Ae2500t... | Answered on May 21, 2014

Not finding what you are looking for?
Jandy Ae2500t 115,000 Btu Heat Pump Logo

34 questions posted

Ask a Question

Usually answered in minutes!

Top Jandy Pool & Spa Experts

David Spradling
David Spradling

Level 3 Expert

10371 Answers

Bill Jordan

Level 2 Expert

375 Answers

Steve Slater

Level 2 Expert

72 Answers

Are you a Jandy Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Jandy Pool & Spa

  • Jandy Pool & Spa

Most Popular Question

jandy ae ti ae3000t 263

  • Pool & Spa
Loading...