20 Most Recent Jet 3 Ultra Power Chair - Page 5 Questions & Answers


4 Flashes =
There is a bad connection on the right motor.
Check the right motor connections and wiring
harnesses.

this is the trouble shooting guide that has the error codes listed http://www.pridemobility.com/includes/download.php?f=troubleshooting/INFINFB2045_Jet_3_Ultra_Troubleshooting.pdf
it is a link to a direct download of the .PDF file open with any PDF reader like adobe reader. if you have no reader just go to this link: http://www.adobe.com/uk/products/reader.html
adobe reader it is free

worth a download for future referance.


hope that helps. regards, mark.

Jet 3 Ultra... | Answered on Mar 17, 2014


it depends on number of lights, this is the trouble shooting guide that has the error codes listed http://www.pridemobility.com/includes/download.php?f=troubleshooting/INFINFB2045_Jet_3_Ultra_Troubleshooting.pdf
it is a link to a direct download of the .PDF file open with any PDF reader like adobe reader. if you have no reader just go to this link: http://www.adobe.com/uk/products/reader.html
adobe reader it is free

example of error code: 10 Flashes =
An excessive voltage has been applied to the control system.
Check the battery connections.


hope that helps. regards, mark.

Jet 3 Ultra... | Answered on Mar 17, 2014


for that go to invacare tech

Jet 3 Ultra... | Answered on Jan 28, 2014


\hmm what do u need to know? how to replace battery?if so take seat off then take off shroud and u will see batterys,make a wiring diagram of how batterys are conected before u remove them, good luck

Jet 3 Ultra... | Answered on Jan 26, 2014


u need both gear boxes replaced or new seals put in them,go to ebay and look for the motors with gear boxes for your specific chair or otherwise u will need to ordor them from a dealer and and have your insurance pay for them

Jet 3 Ultra... | Answered on Jan 20, 2014


first thig is to jack up front or have someone help u lift the chair on a, box that that will just fit between the tires and then put in gear and take nut and washer off then pull tire off if u bought new tires without the rims u need to take to a tire repair shop and have them put them on for u then replace
\

Jet 3 Ultra... | Answered on Jan 20, 2014


take seat off then take cover off with 4 screws then make a diagram of existing cables then take cables off remove old batterys, then go back with same style batterys making sure they are gel batterys and exact match and reverse the steps above,good luck

Jet 3 Ultra... | Answered on Jan 20, 2014


that can be caused by several things,low voltage, gearbox has a broken tooth in gear ,or u may need to buy new batterys, have some one check voltage of batterys first, and have them do a load test on batterys also,good luck and if this seems be ok have a dealer tech look at it and tell u what is wrong

Jet 3 Ultra... | Answered on Jan 20, 2014


please contact a dealer tech,u may have a bad controller it happens

Jet 3 Ultra... | Answered on Jan 19, 2014


i take it this is a used chair,u just bought someone elses problem,sorry,begin by checking voltage of batterys,after they are charged,then see if if it powers on,if it doesnt,id ask for my money back,or u can hire a tech to look at it and give u a written report on what it will take to fix it

Jet 3 Ultra... | Answered on Jan 19, 2014


check levers under chair make sure they are engaged,first
then turn off power and reboot

Jet 3 Ultra... | Answered on Jan 19, 2014


sounds like the power is not getting through, check the batteries are they charged? if not there is prob a loose lead or battery needs to be re fitted to be sure they are making proper contact.

Jet 3 Ultra... | Answered on Dec 02, 2013


Bad controller or charger plugged in.

Jet 3 Ultra... | Answered on Nov 14, 2013


power lead keeping flashing but will not start

Jet 3 Ultra... | Answered on Oct 28, 2013


Look online at manufacturers website

Jet 3 Ultra... | Answered on Oct 26, 2013


Check condition of batteries. Be sure casters and anti-tilt wheels are turning freely. Be sure speed control buttons on keypad are free of crud and are advancing the LEDs.

Jet 3 Ultra... | Answered on Jun 17, 2013


If you have a GC Controller 8 flashes indicate a control system fault. Check all connections - especially connections to power module and joystick.

Jet 3 Ultra... | Answered on Jun 08, 2013


Google - Jet3 Ultra repairs - and your town...

Jet 3 Ultra... | Answered on May 19, 2013

Not finding what you are looking for?
Jet 3 Ultra Power Chair Logo

418 questions posted

Ask a Question

Usually answered in minutes!

Top Jet Health & Beauty Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Vincent G
Vincent G

Level 3 Expert

2361 Answers

ray gallant
ray gallant

Level 3 Expert

65457 Answers

Are you a Jet Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Jet Health & Beauty

  • Jet Health & Beauty

Most Popular Question

when turn chair all comes top warning

  • Health & Beauty
Loading...