20 Most Recent LG WD-3243RHD Front Load Washer / Dryer - Page 7 Questions & Answers

PE= pressure error. A water level error. Check hose to pressure sensor. Is it connected? Does it have a hole in it? Otherwise replace pressure sensor.

LG Washing... | Answered on Jul 17, 2019

I'm sure you double checked, but I have forgotten to plug the connectors from the control back together before putting the top back on. Seems obvious but I've done it more than once. Good luck. (And make sure your house breaker isn't tripped)

LG Washing... | Answered on Jul 08, 2019

The lid has hinges on the back so it rotates back from the front. The front is held in place but two metal clips. Push a metal spatula in the seam between the top and front to release the clips. Clips are about 1/4 in from each side.

LG Washing... | Answered on Jul 04, 2019

If this is a front loader and older model check the spider arm on the back of the drum it may be corroded and putting the drum off center at low speed. I just replaced the drum to tub gasket and the spider arm which was severely corroded (name may not be correct go to the LG parts site)

LG Washing... | Answered on Jul 02, 2019

I just finish repairing my LG front loader and this sounds like the same issue. The back of the drum has a spider arm and spindle arrangement (think that the name) the spider are was corroded and broke after 10 years, this puts the drum off balance and chews up the gasket. I had to also repair the wash tub where the drum had worn into it and JB Weld worked fine. It all seem to work fine now.

LG Washing... | Answered on Jul 01, 2019

DL is indeed a door lock error. The code is generated when the CCU can't lock the door. Possible causes are door latch mechanism, connecting wiring, or the CCU. You could hear clicking from the CCU machine which indicated to me the CCU was trying to lock the door. It tries 6 times before setting the F/DL code.
?Check Door Lock/Switch Assembly for foreign objects
?Check Wire Harness connections to the Door Lock/Switch Assembly

All the best !

LG Washing... | Answered on Jun 30, 2019

could be lid switch are some else, you should call techicain to help you out

LG Washing... | Answered on Jun 24, 2019

Possibly the circuit breaker failed and cannot be reset.

LG Washing... | Answered on Jun 23, 2019

Hello Johan,
This sounds like the pump has jammed up or the pump has failed. Remove pump and check wether there is anything jamming it up.
also if you put it on a spin cycle check if the pump is humming.
If Yes, there is your problem.
You will need to remove the pump to check that out.
Make sure it iturn freely.


LG Washing... | Answered on Jun 22, 2019

Hello Chris, Here is a link to the user manual. Hope it is helpful to you, best of luck. JP

LG Washing... | Answered on Jun 22, 2019

Here is something that has worked on some lg washers: unplug, wait five minutes, hold in power button for 15 secs, plug back in while holding in power button for another 15 secs, release. a supposed reset to control board.
I have also included a video link that may helpful to you.
Good luck,

LG Washing... | Answered on Jun 21, 2019

Not finding what you are looking for?
LG WD-3243RHD Front Load Washer / Dryer Logo

90 questions posted

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers


Level 3 Expert

85216 Answers


Level 3 Expert

411 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LG Washing Machines

  • LG Washing Machines

Most Popular Question

lg wd 3245rhd le error message

  • Washing Machines