20 Most Recent Samsung CLP 315 Laser Printer Questions & Answers


Ghosting appears often because of bad toner. If cartridges have been refilled, they have wrong toner in them. If drum has worn out it will usually tell you. All parts for this machine cost too much. If toner is not the problem, probably best to get a new machine rather than pay to get it fixed. Brothers are cheaper to run.

Samsung CLP 315... | Answered on Nov 22, 2019


Press and hold the stop button for 5 seconds...a configuration report will be printed out. Reference page 41 in this link to Samsung for your CLP315.
http://downloadcenter.samsung.com/content/UM/200911/20091106143806375/Guide_EN.pdf

Samsung CLP 315... | Answered on Jul 10, 2019


the printer may be detecting dust or something on the sensor, and detecting it as a jam

try to get the sensors cleaned, tell us how you go

Samsung CLP 315... | Answered on Jun 21, 2019


Don't print in text box.Do without that.

Samsung CLP 315... | Answered on Feb 19, 2019


Does one of these situations apply to you?

The Status LED light is Red and the Toner lights are OFF (Check Smart Panel for message)

  • A Paper Jam has occurred.
  • The Front, Top, or Back Cover is open.
  • There is no paper in the Paper Tray.
  • There is a problem with the Waste Toner container.
  • A major error has occured.

The Status LED light is Blinking/Flashing Red and the Toner light(s) are Red

  • The Toner cartridge(s) that are Red need to be replaced. (Can still be used to print, but quality is unreliable)

The Status LED light is Red and the Toner light(s) are Red

  • The Toner cartridge(s) that are Red need to be replaced. (Printing is not available)
  • The Toner cartridge(s) are not installed properly.
Source: samsung troubleshooting guide for CLP-315

Samsung CLP 315... | Answered on Jan 05, 2019


Yes, you have to change the print properties on the computer to let the printer know it is using cardstock. Please refer to the owners manual to get the information. The manual can be found at www.samsung.com under the support section.

Samsung CLP 315... | Answered on Dec 18, 2016


samsung clp color leserjet printer writes this massage toner exhaust yellow toner. i have done the toner refil without the reset chips about two times now and i have been printing for some time now i get the message "toner exhaust yellow toner"

Samsung CLP 315... | Answered on Sep 22, 2015


No toner reset procedure , u need to replace toner chips ,else replace with oem toner cartrdiges

Samsung CLP 315... | Answered on Sep 03, 2015


sensor is a clip type device, which is situated below the pick up roller.

Samsung CLP 315... | Answered on May 23, 2015


firstly restart the printer, if same error is comimg.
then,

fuser error. replace fuser unit

Samsung CLP 315... | Answered on May 23, 2015


This is the problem in the exit sensor of the printer. Please approach authorised service center they will change for you.

Samsung CLP 315... | Answered on Apr 26, 2015

Not finding what you are looking for?
Samsung CLP 315 Laser Printer Logo

493 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

CLP Samsung

  • CLP Samsung

Most Popular Question

clp315 print orange led light checked

  • Office Equipment & Supplies
Loading...