20 Most Recent Sansui HDLCD-2200 22 in. LCD TV Questions & Answers


have you perhaps changed the settings with the remote?
if it wont change with either the remote, or the side buttons.(ie the source button) then perhaps its been disabled by going into service mode, or perhaps a defective main av board

Sansui... | Answered on Dec 09, 2013


Hello,

The reason you are having sound but no pictures might be due to the fact that the lamp is bad.

Have the television unplugged for about two hours, then you unscrew it open, thenassess the lamp to know if it needs to be replaced.

Take care

Sansui... | Answered on Nov 06, 2010


HI,
this is the manual and you need the cable tp program it...you can get it easily at a affordable cost

http://tv.manualsonline.com/ex/thread/view/idThread/2442932

thank you for using fixya,rate my answer
vijay

Sansui... | Answered on Oct 05, 2009


I had this problem on my 42" Philips. Just got it yesterday and worked fine on the tv stand. As soon as I mounted the TV to the wall via wall mount system, I had the exact same issue you did. Figured it out today.

The wall mount was putting pressure against the center of the back of the tv (tv set had a slightly rounded back plate, and the mount was a flat plate). As soon as I put spacers (part of the wall mount hardware set) between the wall mount braket and the tv so there was no contact except at the mounting holes, the tv worked fine.

My theory is the pressure pushed the tv back plate against some board components which caused them to overheat (no air flow); or put pressure on internal connectors. I dont know.

Hope this helps, may not apply to your situation.

Sansui... | Answered on Sep 18, 2009


I get all my firmware updates from this site
Home Page

Sansui Televison... | Answered on Nov 14, 2019


I'm guessing a power surge from the returning power burned something up. You should have all your electronics plugged into surge protectors at a minimum. The best protection is a UPS (uninterruptable power supply).

Sansui Televison... | Answered on Nov 13, 2019


i'd like a nice coed too but young women don't usually go for old worn out men

Sansui Televison... | Answered on Nov 10, 2019


Already answered on your earlier post/
Short answer, analog probably not possible.
Maybe if you get a digital antenna and you have stations in your area.

Sansui Televison... | Answered on Nov 03, 2019


Hi Matt, for what you say the internal power supply of the Combo Sansui, 110 volts a12v, is not working
Indicate model of Combo Sansui, which you are commenting on, in order to find the best possible solution
I wait your answer
Regards Franco Dosil
Hola Matt, por lo que comentas no esta funcionando la fuente de alimentacion interna del Combo Sansui, de 110 volts a12v
Indica modelo del Combo Sansui, del que estas comentando, para poder encontrar la mejor soluci?n posible
Espero tu respuesta
Saludos Franco Dosil

Sansui Televison... | Answered on Oct 14, 2019


go into audio settings on cable remote and change

Sansui Televison... | Answered on Oct 08, 2019


go into picture settings and change view

Sansui Televison... | Answered on Oct 08, 2019

Not finding what you are looking for?
Sansui HDLCD-2200 22 in. LCD TV Logo

13 questions posted

Ask a Question

Usually answered in minutes!

Top Sansui Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76186 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sansui Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sansui Televison & Video

  • Sansui Televison & Video

Most Popular Question

program locked

  • Televison & Video
Loading...