Questions & Answers
have you perhaps changed the settings with the remote?
if it wont change with either the remote, or the side buttons.(ie the source button) then perhaps its been disabled by going into service mode, or perhaps a defective main av board
88 views | 0 helpful votes
Tv is on Component. screen is black but sound is
The reason you are having sound but no pictures might be due to the fact that the lamp is bad.
Have the television unplugged for about two hours, then you unscrew it open, thenassess the lamp to know if it needs to be replaced.
99 views | 0 helpful votes
Screen goes blank after about 10 or 15 minutes.
I had this problem on my 42" Philips. Just got it yesterday and worked fine on the tv stand. As soon as I mounted the TV to the wall via wall mount system, I had the exact same issue you did. Figured it out today.
The wall mount was putting pressure against the center of the back of the tv (tv set had a slightly rounded back plate, and the mount was a flat plate). As soon as I put spacers (part of the wall mount hardware set) between the wall mount braket and the tv so there was no contact except at the mounting holes, the tv worked fine.
My theory is the pressure pushed the tv back plate against some board components which caused them to overheat (no air flow); or put pressure on internal connectors. I dont know.
Hope this helps, may not apply to your situation.
205 views | 0 helpful votes
I need a code for a sansui TV. To be able to turn it on
Hello Cathy, comment on the model of your TV Sansui and the brand and model of the remote control, for which you are needing the code, to try to find the best possible solution
I await your comment
Greetings Franco Dosil
Hola Cathy, comenta el modelo de tu TV Sansui y la marca y modelo del control remoto, por la cual estas necesitando el codigo, para tratar de encontrar la mejor solucion posible
Espero tu comentario
Saludos Franco Dosil
34 views | 1 helpful votes
Not finding what you are looking for?