Lexmark X4650 InkJet Printer - Page 7 - Answered Questions & Fixed issues


Hello,

When you save the image in the 'Save Image' dialog is there a pull down list that says 'Save as file type'? Located just below where you enter the file name. If there is pull it down and select jpg as the file type.

HTH

Lexmark X4650... | Answered on Jun 16, 2011 | 71 views


These new printers register and memorize ink cartridges so that they cannot be refilled the only way to refill them is to never let then run to zero percent once they reach zero the printer prevents them from operating if you do catch them before they rundow they will still run down to nothing but will continue to operate as long as you donot let them run out of ink.

Thumbs Up if Helpful also feedback is appreciated!!!

Lexmark X4650... | Answered on Jun 16, 2011 | 135 views


  • Lay the picture to be scanned face-down on the glass. Square up the photo using the guides that are usually located along the edges of the scanning bed.

  • Click the scan button on your computer's scanning software window. Some all-in-one printers need you to press the scan button on the printer itself; check the manual before using.


  • Get a preview of the scanned image up on your computer monitor. This might happen automatically depending on your software settings; if not, you will have to prompt your computer to display one.



  • Lexmark X4650... | Answered on Jun 15, 2011 | 156 views


    Hi

    It might be the print spooler service locked up. Try to stop and restart again.

    Go to START MENU
    Choose Commamd prompt, right click mouse and run as administrator (You should be in this command C:\WINDOWS\SYSTEM32- If not type this command when you in the dos command prompt "CHDIR C:\WINDOWS\SYSTEMS32\ and press enter")
    Type the letter "cmd"
    Type the word "net stop spooler"
    Exit
    Go to C: drive
    Choose to Windows Folder
    Click show content
    Choose system32 folder
    Choose spool folder
    Choose printer
    And delete any printing jobs pending
    Again go back to CMD window and type the word "net start spooler"
    Restart your computer and must also turn off your printer and then switch it on.
    It will work fine right now
    I hope it helps you
    Please rate and make a comment if you find this solution very helpful and might help others as well. Post more comments if you need more help.

    Regards and thank you for using Fixya !

    Lexmark X4650... | Answered on Jun 04, 2011 | 62 views


    Open the printer cover and access the cartridge area. Remove both cartridges. While the cover is open, check for any obstructions in the cartridge carrier's path. Check for any loose transparent strip (encoder strip). If cartridge area clear from these, Close the cover. Unplug and replug the printer into the power source to reset it. When the printer turns on, open the printer cover and reinsert the cartridges. Close the cover and try to print again.

    Lexmark X4650... | Answered on Jun 01, 2011 | 85 views


    Check if your printer is still connected to the same network as your computer. Refer to this article: How to Print the Network Settings Page on X4600 Series All-In-Ones (AIOs). If you the printout, check the SSID and other network information. If printer still belongs to your network, then it could be a firewall issue. Make sure to allow all Lexmark and printer communications in the program rules/permissions for your firewall. If printer doesn't belong the same network as your computer, then you need to reset the printer's wireless network adapter and re-launch the Lexmark Wireless Setup Utility. How to Restore the Network Settings on the X4650 AIO to the Original Factory Defaults

    Lexmark X4650... | Answered on Jun 01, 2011 | 167 views


    There could be something blocking the paper path. Remove the sheets of paper from the feeder. Grab a flashlight and look inside for any debris. Make sure the paper path is clear from any obstructions. If you see any physical defects that causes this problem, please contact Lexmark technical support for additional assistance.

    Lexmark X4650... | Answered on Jun 01, 2011 | 42 views


    Make sure the printer is on. Open the printer cover and press the lid to open the cartridge holder.
    printmastert_57.jpg

    Lexmark X4650... | Answered on Jun 01, 2011 | 24 views


    It could be that the print spooler service on your computer has stopped. - Browse to Start -> Run... and type in "NET STOP SPOOLER" (this will stop the print spooler service)


    - type in "NET START SPOOLER" (this will restart the print spooler service)
    Try to print again.

    Lexmark X4650... | Answered on Jun 01, 2011 | 149 views


    I`ll guess You`ll have to connect your PC to the printer with the use of a usb cable.
    Then run the Lexmark software (Lexmark printer home) or similar (don`t know what you are using?)... Go to "settings"; and choose wireless setup utility. You`ll have to manually set the SSID (the wanted wireless network) and the WIFI password for this network. Hope this will help.

    Lexmark X4650... | Answered on Jun 01, 2011 | 190 views


    Sounds to me like a bad USB cable,
    Also when you're re-installing the printer are you using new/different drivers?

    I would try a new cable and the latest drivers direct from Lexmark.com

    Lexmark X4650... | Answered on Jun 01, 2011 | 83 views


    Visit the Lexmark website at http://bit.ly/iofMNC to download the Lexmark X4650 driver. Select your operating system, download and execute the file. Follow the instructions on your computer screen.

    Lexmark X4650... | Answered on May 31, 2011 | 39 views


    First remove both cartridges clean the gold plated area and the area where the ink goes out as well as the area where you plug it in ...And then turn it off first and then it turn it back on the open the cover wait for the cartridge carrier to go to the cetner and then install the cartridges make sure its properly plug in after plugging it in . lock the lever of carrier and close the cover .. Try to check if it will print print a test page . If nothing happens uninstall and reinstall the drivers

    Lexmark X4650... | Answered on May 31, 2011 | 59 views


    What is the version of your new black cartridge? Make sure you are using genuine a Lexmark cartridge. If you've already tried reseating the black cartridge and rebooting the printer yet problem continues, it could be a faulty black cartridge. If you're beyond the return period, please contact Lexmark technical support for additional assistance.

    Lexmark X4650... | Answered on May 31, 2011 | 124 views


    Installing/Replacing your ink cartridges:
    1. Open the printer, and then press down on the cartridge carrier levers. printmastert_52.jpg

    2. Remove the used print cartridge or cartridges. 3. If you are installing new print cartridges, remove the tape from the back and bottom of the color cartridge, insert the cartridge in the right carrier, and then close the color cartridge carrier lid. 4. If a black cartridge is included in the box contents, remove the tape from the back and bottom of the black cartridge, insert the cartridge in the left carrier, and then close the black cartridge carrier lid. 5. Close the printer.

    Sometimes the ink cartridge carrier won't automatically move to its loading position even when the printer is on and the cover is open. Follow the steps below:


    1. Unplug the printer from the power source.

    2. With the cover open, hold the solid white strip that connects from the carrier assembly to the ink cartridge carrier and gently slide the cartridge carrier to the center of the printer.

    3. Remove the used cartridges.

    4. Load the new cartridges. Close the cover.

    5. Plug the printer back to the power source.

    Lexmark X4650... | Answered on May 31, 2011 | 271 views


    Your firewall could be blocking some printer communications. Make sure to allow full access to all Lexmark and printer communications in the program rules/permissions for your firewall. For more information on how to configure the settings for your firewall, visit the Lexmark website at http://bit.ly/iNwkNs.

    Lexmark X4650... | Answered on May 31, 2011 | 433 views


    There could be something blocking the paper path. Remove the sheets of paper from the feeder. Grab a flashlight and look into the feeder. Make sure there are foreign objects or debris that could cause this problem.

    Lexmark X4650... | Answered on May 31, 2011 | 245 views


    Hi.
    Completely remove program.
    Download latest printer update for your printer from Lexmark, following instructions to install.

    Rem to have the printer turned on, so system is able to detect printer signal.

    Hope this assists.

    Lexmark X4650... | Answered on May 24, 2011 | 48 views


    Try to reseat the printhead. Open the cover of the printer > remove the printhead. If the printhead will not go to the center, unplug the printer from the power outlet to turn it off, pull the printhead to the center. Then remove the printhead. Close the cover. Replug the printer to the power source after at least 10 seconds. Re-insert the printhead when prompted.
    If problem continues, updating the firmware for your printer will help fix the issue. Turn off the printer and remove the printhead from the printer again. Close the cover. Replug to the power source after 10 seconds. It will then ask you to "Open Cover to Install the Printhead". Press the Cancel (Red X) button. It should take you back to the "Copy" menu. Proceed with the firmware update. Just go to http://bit.ly/s405fw to download and install the update. Once the update is done, reinsert the printhead by following the prompt on the screen of your printer.

    Lexmark X4650... | Answered on May 24, 2011 | 738 views

    Not finding what you are looking for?
    Lexmark X4650 InkJet Printer Logo

    675 questions posted

    Ask a Question

    Usually answered in minutes!

    Top Lexmark Office Equipment & Supplies Experts

    Clive
    Clive

    Level 3 Expert

    4345 Answers

    Ekse

    Level 3 Expert

    13434 Answers

    Thomas F. Schneider

    Level 3 Expert

    2715 Answers

    Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...