20 Most Recent Bosch 1581AVSK Top Handle Jig Saw Kit Questions & Answers

This tool has no mechanism for the fixating ot the saw but only a short ***** part 53 its a fault in the manual , it simply replace the saw with a screwdriver. or simply the clamp ***** to release turn it loose and from the top you can replace the clamp *****
Bosch B4300 0601582535 Jig Saw Parts

Bosch 1581AVSK... | Answered on Mar 14, 2016

To change the Bosch B4300 blade - If the grey knob does not turn to release the broken blade, you need to use a LONG THIN flathead screwdriver down the center hole at the top. Unscrew until the broken blade is loose. Pull out. Replace the new blade and then screw the it tight through the same hole at the top. DONE.

Bosch 1581AVSK... | Answered on Dec 11, 2015

You betcha, got it right here:


Thanks for using FixYa.com

Bosch 1581AVSK... | Answered on Sep 09, 2010

Hello. where the blade enters the blade holder there is a screw. Unscrew it, turn counterclockwise, remove the screw and then remove the blade. Reinstall the new one and replace the screw. Joe

Bosch 1581AVSK... | Answered on May 08, 2010

Here are some directions on installing the blade to ensure the proper procedure has been followed when installing.
  1. Set the blade orbit selector lever to position III.
  2. Fit the supplied screwdriver into the top plunger hole and loosen the internal blade securing screw about 3 to 4 turns counterclockwise.
  3. Insert the blade into blade plunger at a 90° angle to the cutting direction. With a slight upward pressure, turn the blade teeth forward (direction of cut) and guide the back of the blade into the groove in the center of blade roller guide.
  4. Pull gently down on the blade to seat the blade tabs in the plunger.
  5. With the blade in the proper position, securely tighten the blade screw by turning the screwdriver clockwise.
I hope this helps. Please rate on how helpful the answer was. Good Luck and have a great weekend.

Bosch 1581AVSK... | Answered on Apr 04, 2010

try freemanuals.com on the web

Bosch 1581AVSK... | Answered on Mar 06, 2010

part number is 2 6034 00000 and list is 1.50, you can buy a replacement from Ereplacementparts.com or direct from Boschtools.com

Bosch 1581AVSK... | Answered on Feb 12, 2010

YOu can download the user manual in the following links
The blade can be replaced by unscrewing the screw found on the shaft.

Bosch 1581AVSK... | Answered on Jul 28, 2009

You need a long shafted flat head screwdriver that fits into the hole in the handle above the blade. Then simply loosen or tighten the screw inside there, and the blade twists 90 degrees and will pull completely out. Reverse to install. Also see pg 7 of instruction manual here.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Bosch 1581AVSK... | Answered on Jul 25, 2009

Some have a knob on top to allow you to turn and steer the blade. It can also be locked straight.
Try with a new, good quality blade.
Check for side play in the drive.

Bosch Saws | Answered on Jan 14, 2020

Remove the seal carefully.
Remove the ring clip with needle nose pliers.
Might be hard to see the clip so clean it out a bit.
Bearing should just fall out.
Replace with lots of new grease packed into bearing and put clip back in then seal

Bosch Saws | Answered on Sep 07, 2019

Open the housing and replace the motor

Bosch Saws | Answered on Aug 06, 2019

Not finding what you are looking for?
Bosch 1581AVSK Top Handle Jig Saw Kit Logo

Popular Tags

19 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Saws Experts

Parson's Repair...
Parson's Repair...

Level 2 Expert

234 Answers


Level 2 Expert

261 Answers

John Trevino

Level 3 Expert

1420 Answers

Are you a Bosch Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bosch Saws

  • Bosch Saws

Most Popular Question

manual bosch gst 85pe

  • Saws